I had a problem with the bios before and hoped, it will be fixed with the new bios version but it isnt.
If i start the Pc, sometimes ( at 1 from 2 Starts) there is no starting beep and the bios tell me: Bad bios checksum, try to repair. And then he try to boot from floppy, cd or usb. Then I must clear the cmos and then he start without problems. I tried many different original bios Versions and at last the modded 1601 from ziogts.And switch the bios chip, but no chance.
Zitat von KingScor im Beitrag #1Then I must clear the cmos and then he start without problems.
So after having cleared the CMOS everything is ok and you can use the updated BIOS modules? If yes, why don't you do a "clearing CMOS" after each BIOS update?
ZitatI tried many different original bios Versions and at last the modded 1601 from ziogts.And switch the bios chip, but no chance.
How resp. with which method did you flash the BIOS?
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
No, i mean i must clear the cmos everytime if the checksum error displayed. And this happens everyday. not only after flashing new bios. after a few days this error f$%!ed me up i tried to fix it.
Print view
Sat May 31, 2014 1:22 pm
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
BIOS Modding
»
BIOS Modding Guides and Problems
»
Bios checksum error
