you can open up a request

Zitat von onuracengiz im Beitrag #1441

---

you can open up a request

---

Hi,everyone!
Can someone direct me to a different download link?
The link from the original Post seems to be dead..

I've been running a 9600k for a while now in my ASUS Z270i

Managed to pick up a 9900 (non-K) cheap. Does tool support a 9900 SRG18? I haven't seen any mention of it. I tried it briefly without flashing a new BIOS but no joy.

If I can use it and just need to make a new BIOS great, just need to find the original tool and my raspberry pi so I can flash it again.

EDIT: Nevermind, seems an i7 is the limit for this board from the limited reading I've done.

Hey I have QQLT with Z170X-Designare and it works great but i bought new board. So now i want change mobo to maximus ix extreme. I already upload mod bios but unfortunately PC wont start. I update bios via 'auto usb bios update' or smth.. I didnt make hardware mod (i dont know which two pads should i connect to each other) but the update work anyway with .cap file and formated pendrive to FAT32.
This is how it 'works' now on maximus ix extreme vid
And link to mod bios i made myself maybe something bad is there click
somebody help!

Please can someone share the mod tool? The link in the first post is dead. PM me, any file sharing method, please!

there you have it

yadi.sk/d/i4FE9b-o3apk5b

Zitat von ziddey im Beitrag #1439

---

Zitat von Wendigo im Beitrag #1437

---

First of all I want to say thank you to all those who have gone before, without you I wouldn't have had the guts to try this myself.

I currently have a 9700K in an ASRock Z170 Extreme4 up and running, but with a few issues. The first few times I booted into Windows I got several BSoD's:

PAGE_FAULT_IN_NONPAGED_AREA
MACHINE_CHECK_EXCEPTION (most common)
CLOCK_WATCHDOG_TIMEOUT
edit: also, WHEA_UNCORRECTABLE_ERROR @ 4.3Ghz

I found that turning off Turbo Boost was able to get it stable, but even a mild overclock would cause these errors and additional voltage (1.35v) does not help.
Right now I have it running at 3.7Ghz, 0.1 over base and am going to keep incrementing just to see if it will take any additional frequency. So far no issues, temps are well under control when running p95 (under 60C when overvolted, 45C when stock).

Does anyone have suggestions on how I might be able to get turbo working? I'm not looking to even hit 5Ghz, just want stock turbo speeds available.
edit: Got it up to 4.3, but with the added BSoD while running p95. Definitely seems like a stability issue and voltage isn't the solution. I'll add more graphite and check for bent pins, any other ideas?
edit 2: Checked motherboard pins, short resistance, and tried several versions of the BIOS and the second BIOS chip. No change to the results, the highest stable clocks is under 4Ghz. I am out of ideas at this point other than that I may have broken/insufficient hardware. The motherboard is about 5 years old and was previously running an i5-6600K at a modest 4.2Ghz. My RAM is newer (1.5 years) and I have never had any issues with the system before trying the mod.

---

C-states enabled? Try limiting to c3

1.35v was fixed or adaptive? Verified in windows at your stable 3.7ghz? IA AC/DC loadline if not fixed?

---

Thank you very much for this tool.

Zitat von haragu im Beitrag #346

---

Zitat von Doomslayer im Beitrag #345

---

Thx @revlaay for the great tool. I try my Asus rog g20ci desktop pc with h270 motherboard and it works nicely with i5 9400f.
But i9 9900k its not working, splash logo appear when turn on the Pc, then stuck n freeze, cannot do anything. I restart splash screen logo appear, then pc keep restart, over and over again. After all effort, finally I manged to get this i9 9900k working by disabling the hyper threading, so its only 8thread. Any idea how to make this i9 9900k work with HT enable?

---

hi,

Here is the modified BIOS file using CoffeeTime and UBU. I have not tested it, but I expect it to work.

ROG G20CI
https://www.mediafire.com/file/2y60twutr..._G20CI.rar/file

ROG G20CI for Oculus
https://www.mediafire.com/file/gthtpf17g...G20CIO.rar/file

[ 1 ] ME ver. - 11.8.50.3470 # Corporate
[ 2 ] VBIOS ver. - 1062
[ 3 ] GOP ver. - 9.0.1080
[ 4 ] PCIe x16 - Activated
[ 5 ] SKU hack - Activated
[ 6 ] Cores sync - Activated
[ 7 ] Init 16CPUs - Activated
[ 8 ] ACPI tables - CPU8+ patterns found
[ 0 ] Microcodes - 906EC 906EB 906EA 906E9 506E8 506E3 506E1 506E0

[ H ] ME HAP-bit - ME DISABLED
[ T ] 12T blocker - Not found
[ N ] NVME fix - Installed

[ U ] FD Regions - All unlocked
[ M ] MAC-address - 888888888788

MCodes info - Found 8 microcode(s) in volume(s) 2, 4

1 - Disk Controller
EFI IRST RAID for SATA - 17.2.0.3790
OROM IRST RAID for SATA - 17.2.0.3790
EFI NVMe Driver present
2 - Video OnBoard
EFI GOP Driver SKL-CFL - 9.0.1080
OROM VBIOS SKL-KBL - 1062
3 - Network
EFI Intel Gigabit UNDI - 0.0.23
OROM Intel Boot Agent CL - 0.1.13
5 - CPU MicroCode
Before:
# │ CPUID │ Platform ID │ Revision │ Date │ Type │ Size │ Offset │ Last ║
1 │ 506E3 │ 36 (1,2,4,5) │ C2 │ 2017-11-16 │ PRD │ 0x18400 │ 0x9CE730 │ No ║
2 │ 506E1 │ 22 (1,5) │ 1E │ 2015-03-18 │ PRD │ 0x12800 │ 0x9E6B30 │ No ║
3 │ 506E0 │ 22 (1,5) │ 12 │ 2014-09-24 │ PRD │ 0x13C00 │ 0x9F9330 │ No ║
4 │ 906E9 │ 2A (1,3,5) │ 84 │ 2018-01-21 │ PRD │ 0x18000 │ 0xA0CF30 │ No ║
5 │ 506E8 │ 22 (1,5) │ 34 │ 2016-07-10 │ PRD │ 0x17800 │ 0xA24F30 │ Yes ║
6 │ 906EB │ 02 (1) │ 84 │ 2018-01-21 │ PRD │ 0x18000 │ 0xA3C730 │ No ║
7 │ 906EA │ 22 (1,5) │ 84 │ 2018-01-21 │ PRD │ 0x17800 │ 0xA54730 │ No ║

After:
| # | CPUID | Platform ID | Revision | Date | Type | Size | Offset | Last |
+----+-------+--------------+----------+------------+------+---------+----------+------+
| 1 | 906EC | 22 (1,5) | AE | 2019-02-14 | PRD | 0x18000 | 0x319AB0 | Yes |
| 2 | 906EB | 02 (1) | AE | 2019-02-14 | PRD | 0x18400 | 0x331AB0 | Yes |
| 3 | 906EA | 22 (1,5) | AE | 2019-02-03 | PRD | 0x18000 | 0x349EB0 | Yes |
| 4 | 906E9 | 2A (1,3,5) | AE | 2019-02-14 | PRD | 0x18400 | 0x361EB0 | Yes |
| 5 | 506E8 | 22 (1,5) | 34 | 2016-07-10 | PRD | 0x17800 | 0x37A2B0 | Yes |
| 6 | 506E3 | 36 (1,2,4,5) | CA | 2019-02-03 | PRD | 0x18800 | 0x391AB0 | Yes |
| 7 | 506E1 | 22 (1,5) | 2A | 2015-06-02 | PRD | 0x12C00 | 0x3AA2B0 | Yes |
| 8 | 506E0 | 22 (1,5) | 18 | 2014-11-19 | PRD | 0x14000 | 0x3BCEB0 | Yes |
+----+-------+--------------+----------+------------+------+---------+----------+------+
| 9 | 906EC | 22 (1,5) | AE | 2019-02-14 | PRD | 0x18000 | 0x9CE718 | Yes |
| 10 | 906EB | 02 (1) | AE | 2019-02-14 | PRD | 0x18400 | 0x9E6718 | Yes |
| 11 | 906EA | 22 (1,5) | AE | 2019-02-03 | PRD | 0x18000 | 0x9FEB18 | Yes |
| 12 | 906E9 | 2A (1,3,5) | AE | 2019-02-14 | PRD | 0x18400 | 0xA16B18 | Yes |
| 13 | 506E8 | 22 (1,5) | 34 | 2016-07-10 | PRD | 0x17800 | 0xA2EF18 | Yes |
| 14 | 506E3 | 36 (1,2,4,5) | CA | 2019-02-03 | PRD | 0x18800 | 0xA46718 | Yes |
| 15 | 506E1 | 22 (1,5) | 2A | 2015-06-02 | PRD | 0x12C00 | 0xA5EF18 | Yes |
| 16 | 506E0 | 22 (1,5) | 18 | 2014-11-19 | PRD | 0x14000 | 0xA71B18 | Yes |
+----+-------+--------------+----------+------------+------+---------+----------+------+

---

Hi,
can someone reupload revlaay's mod tool? Mega link in the first post is dead.
Thanks

I suggest that anyone looking for Revlaay's tool instead use CoffeeTime by svarmod, which now has a GUI and suports many configurations.

Hi, really sorry to drop this here if it is dumb..

I have an i7 8700k, and an Asus Strix 270E. Will i be able to use this tool to make them work together?

Zitat von Wendigo im Beitrag #1437

---

I currently have a 9700K in an ASRock Z170 Extreme4 up and running, but with a few issues. The first few times I booted into Windows I got several BSoD's:

PAGE_FAULT_IN_NONPAGED_AREA
MACHINE_CHECK_EXCEPTION (most common)
CLOCK_WATCHDOG_TIMEOUT
edit: also, WHEA_UNCORRECTABLE_ERROR @ 4.3Ghz

I found that turning off Turbo Boost was able to get it stable, but even a mild overclock would cause these errors and additional voltage (1.35v) does not help.
Right now I have it running at 3.7Ghz, 0.1 over base and am going to keep incrementing just to see if it will take any additional frequency. So far no issues, temps are well under control when running p95 (under 60C when overvolted, 45C when stock).

---

hello every one!
i really need coffee lake mod tool revlaay mode...i don't know and like to use coffe time new version...