Hi @PCGH_Torsten so, I've been digging a little bit and found this thread from @reactive :

Here he explained exactly how he managed to do the conversion and such.
But, actually how tho? What is BCP?? FIT? I don't know any of this stuff.
@Lost_N_BIOS do you know what he is talking about?

@Lost_N_BIOS - I noticed another problem
When I plug the Displayport cable into the graphics card, the USB ports on the board do not work except for two USB port 3.0
When the monitor is connected with an HDMI cable everything works normally.
Is this happening because of the modified bios?
The picture is from the internet but everything is the same as with my motherboard

Hi @ALviK98,

really, wow, I didn't remember I wrote that before I reread it.

BCP is AmiBCP: AMI BIOS Configuration Program
FIT: a tool from Intel to modify the Firmware Interface Table. Configuration of the PCIe Lanes, Clocksources......

Ask.
I have biostar H110gm pro D4.
Will its work for i3 9100f by moding coffe time brother?
Im sory bad engls..

Hi all.

I have tryed several things and i just cant run 9900K and 9900KF on my Asus maximus ix extreme board.
After bios mod and flash i put i5 9500 and it booted after few restarts with no problem and then i put the 9900KF which with one bios that i made did not boot and stuck at 91 ant the qcode and all of the bios attempts i made it just bootloops.
Made the bios with the "new" mod tool then with the "new" tool plus the files from the "update" folder, after that tried with just the old tool and then again old tool plus the files from the "update" folder.
Tried with "AllInOne" alone and with "AllInOne" plus the "SincAllCoresRatio" and nothing worked it just bootloops forever.
I flashed the bios with flash "box" provided by asus for their boards and the bios should be flashed correctly.
I also tried the last and previous versions of the bios.

If anyone can help with tips how to run the 9900KF preferably or 9900K i will be very thankful.

Zitat von Devill23 im Beitrag #1415

---

Hi all.

I have tryed several things and i just cant run 9900K and 9900KF on my Asus maximus ix extreme board.
After bios mod and flash i put i5 9500 and it booted after few restarts with no problem and then i put the 9900KF which with one bios that i made did not boot and stuck at 91 ant the qcode and all of the bios attempts i made it just bootloops.
Made the bios with the "new" mod tool then with the "new" tool plus the files from the "update" folder, after that tried with just the old tool and then again old tool plus the files from the "update" folder.
Tried with "AllInOne" alone and with "AllInOne" plus the "SincAllCoresRatio" and nothing worked it just bootloops forever.
I flashed the bios with flash "box" provided by asus for their boards and the bios should be flashed correctly.
I also tried the last and previous versions of the bios.

If anyone can help with tips how to run the 9900KF preferably or 9900K i will be very thankful.

---

Zitat

---

ROG M9H all BIOS version with CpuMpPei patched , boot with i7 ,keep rebooting , debug light show 91.

---

[GUIDE] Coffee Lake CPUs on Skylake and Kaby Lake motherboards (60)

Zitat

---

Unfortunately, M9E hasn't bro from Z370 lineup. I tried make ports from all other Z370 boards (A, C, H, F) with similar VRM and they all partially works, even can boot in OS and work under load... But PCIe, USB and SATA lines has completely different configuration, so system didn't work after restart.

---

may only work with ht disabled

My PC is a prebuilt MSI Trident 3, using H110 chipset (16MB BIOS), I have modded the BIOS and flash it successfully (added B0 and U0 microcode but haven't try any Coffee Lake yet as I don't have one)
I wanted to use the U0 but according to many posts, mine can only use B0 CPUs. The MSI they have the newer version of this machine using H310 chipset.

My question is: is it possible to port the H310 BIOS to my H110 machine?

I'm hoping I could use the U0 CPUs or above with the ported BIOS. I've uploaded the BIOS here, including my modded BIOS, the stock H310 BIOS and stock H110; naming accordingly.

file. io/Nb7NTuArkZfy

(I can't post links, please remove the space)

I much appreciated any help. Thank you.

Zitat von Devill23 im Beitrag #1415

---

Hi all.

I have tryed several things and i just cant run 9900K and 9900KF on my Asus maximus ix extreme board.
After bios mod and flash i put i5 9500 and it booted after few restarts with no problem and then i put the 9900KF which with one bios that i made did not boot and stuck at 91 ant the qcode and all of the bios attempts i made it just bootloops.
Made the bios with the "new" mod tool then with the "new" tool plus the files from the "update" folder, after that tried with just the old tool and then again old tool plus the files from the "update" folder.
Tried with "AllInOne" alone and with "AllInOne" plus the "SincAllCoresRatio" and nothing worked it just bootloops forever.
I flashed the bios with flash "box" provided by asus for their boards and the bios should be flashed correctly.
I also tried the last and previous versions of the bios.

If anyone can help with tips how to run the 9900KF preferably or 9900K i will be very thankful.

---

delete

Read thru about 20 pages of this thead. Still can't figure out why my i9 9900k doesn't show up as an option when I pass the CAP file I get directly from Asus for mb z170-e to AllInOne.exe.

Here's what I'm seeing:

Zitat

---

????????????????????????????????

Process file "..\.\\Z170-E-ASUS-3801.CAP"
Choose Target CPU :

B0:
G49x0(T),G5420(SR3YH),G55x0(T),G56x0(T),8100(T),8300(T),8350K,
9100(T),9100F(SRF7W),9300(T),9350(K,F)

U0:
G54x0(T),8400(T),8500(T),8600(K),8700(T,K),8086K,
9100F(SRF6N),9400(SR3X5),9400F(SRF6M),9500,9500F(SRF6Q),9600

P0:
9400(SRELV),9400F(SRFAH),9600K(SRELU),9600KF(SRFAD),
9700KF(SRFAC),9700K(SRELT)

R0:
9400(SRG0Y),9400F(SRG0Z),9500F(SRG10),9600K(SRG11),
9600KF(SRG12),9700(SRG13),9700F(SRG14),9700K(SRG15),9700KF(SRG16)

?B0:1? ?U0:2? ?P0:3? ?R0:4? ???:5? ???:

---

Zitat von redpea im Beitrag #1420

---

Read thru about 20 pages of this thead. Still can't figure out why my i9 9900k doesn't show up as an option when I pass the CAP file I get directly from Asus for mb z170-e to AllInOne.exe.

Here's what I'm seeing:

Zitat

---

????????????????????????????????

Process file "..\.\\Z170-E-ASUS-3801.CAP"
Choose Target CPU :

B0:
G49x0(T),G5420(SR3YH),G55x0(T),G56x0(T),8100(T),8300(T),8350K,
9100(T),9100F(SRF7W),9300(T),9350(K,F)

U0:
G54x0(T),8400(T),8500(T),8600(K),8700(T,K),8086K,
9100F(SRF6N),9400(SR3X5),9400F(SRF6M),9500,9500F(SRF6Q),9600

P0:
9400(SRELV),9400F(SRFAH),9600K(SRELU),9600KF(SRFAD),
9700KF(SRFAC),9700K(SRELT)

R0:
9400(SRG0Y),9400F(SRG0Z),9500F(SRG10),9600K(SRG11),
9600KF(SRG12),9700(SRG13),9700F(SRG14),9700K(SRG15),9700KF(SRG16)

?B0:1? ?U0:2? ?P0:3? ?R0:4? ???:5? ???:

---

---

asus z170, you need to use bios <3000 to support >8thread cpus like the 9900k.

from the first post:

Zitat

---

Known issues
1. Asus 100 series 2xxx version bios can support up 16 threads

---

@Lost_N_Bios
Sry for ping, I'm New to this forum and scared to mod my BIOS. I don't wanna make any stupid mistake. So,
I've successfully created Mod BIOS using the latest Mod tool for GA H110M-H
I haven't flashed BIOS yet. The original BIOS file has .F24 extension whereas the mod BIOS has.BIN ext. Should I change the ext. from .bin to.f24 ?
Will I be able to use i3 9100f on my GA H110m-H without any pin mod? I think i3 9100f doesn't require any pin mod.
Would my board support both Kaby Lake or Coffee Lake CPUs or only Coffee Lake Cpu?

Can anyone please guide me in correct direction?
Thanks!

I'm using Motherboard gigabyte GA-B250M-Gaming 3 with i7-7700. can i'm mod this motherboard to use i7-9700 ? thank everyone

Zitat von Devill23 im Beitrag #1415

---

Hi all.

I have tryed several things and i just cant run 9900K and 9900KF on my Asus maximus ix extreme board.
After bios mod and flash i put i5 9500 and it booted after few restarts with no problem and then i put the 9900KF which with one bios that i made did not boot and stuck at 91 ant the qcode and all of the bios attempts i made it just bootloops.
Made the bios with the "new" mod tool then with the "new" tool plus the files from the "update" folder, after that tried with just the old tool and then again old tool plus the files from the "update" folder.
Tried with "AllInOne" alone and with "AllInOne" plus the "SincAllCoresRatio" and nothing worked it just bootloops forever.
I flashed the bios with flash "box" provided by asus for their boards and the bios should be flashed correctly.
I also tried the last and previous versions of the bios.

If anyone can help with tips how to run the 9900KF preferably or 9900K i will be very thankful.

---

tengo una h110m-r de asus que puedo hacer que tal funciona donde puedo conseguir la bios .