My ME was updated from 11.6.x to 11.7.x,

Hello,

Thanks for this tool, it works like a charm.

In the first page of the tutorial, it shows how to isolate & Connect B0 , U0 and P0 cpu families.. But on the tool, there is a R0 option , so for the R0 family (9400(SRG0Y),9400F(SRG0Z),9500F(SRG10),9600K(SRG11),
9600KF(SRG12),9700(SRG13),9700F(SRG14),9700K(SRG15),9700KF(SRG16) should i use P0 isolate & connect method?

One more thing , i tried with Asus Z270-P Prime with a G4900 (without T) , on the tool itself and first page shows 4900(T) , so is this means only 4900T works? 4900 (without t) is not working?

What i did is, i read the flash with a flash tool and used the BIN file on the Mod-tool , selected 1 (i tried with g4900 and i3 9100f) , it successfully created the bin file, wrote the bin with spi programmer and soldered to my Asus Z270-P Prime mobo , but i3 9100f and g4900 is not working.

When i tried with a g4400 , it works with the modified bios , but when i try with i3 9100f (srf7w) or g4900 , no success :(

man sorry i am new here on this forum but as i can see you are most trusted man here :P so i just want to ask you do you have some pre-moded bios for GA-H110-D3A i have i3 9100f w7 b0 .. so i see that i dont need to do enything with pins, i just need some moded bios and way to put it on mainboard , i also have CH341 programer so what is eazyest way to do it just tell me pliz :P i read and read ... but my eng its not good so i just didnt get it what to do .. sorry and thx

Zitat von davidtheking im Beitrag #916

---

My ME was updated from 11.6.x to 11.7.x,

---

Anyone help?

i have i5 9400f , i3 9100f and g4900 cpus waiting to be installed on Z270-P Asus mainboards and i'm willing to pay for a service for building me a bios for these mobos.

@terrific - I can make you BIOS What is the SSPC of your i5-9400F and your i3-9100F, look on top of CPU it's printed there? Please send me your original programmer dumped BIOS before you did ANYTHING to the BIOS
Yes, for all CPU you have to modify CPU pad or find hardmod for your board. Here is what you have to isolate and connect for Asus, blue must be isolated (taped off) and green must be connected



@somazvanica - Programmer is not needed for Gigabyte BIOS, dump full BIOS with FPT and send to me, I will modify for you

Zitat von Lost_N_BIOS im Beitrag #922

---

@terrific - I can make you BIOS What is the SSPC of your i5-9400F and your i3-9100F, look on top of CPU it's printed there? Please send me your original programmer dumped BIOS before you did ANYTHING to the BIOS
Yes, for all CPU you have to modify CPU pad or find hardmod for your board. Here is what you have to isolate and connect for Asus, blue must be isolated (taped off) and green must be connected



@somazvanica - Programmer is not needed for Gigabyte BIOS, dump full BIOS with FPT and send to me, I will modify for you

If you have already modified the BIOS in ANY way, you will need to re-flash it back to factory defaults using factory method (NOT FPT)!!!

If you do not have Intel ME drivers installed, install them now from your system driver download page, then start over here after reboot.
Check your BIOS' main page and see if ME FW version is shown. If not then > DOWNLOAD HWINFO64 HERE <

Once HWINFO is open, look at the large window on the left side, expand motherboard, and find the ME area.
Inside that section is the ME Firmware version. Take note of the version. (ie. write it down or get a screenshot)

Once you have that, go to the thread linked below, and in the section "C.2" find and download the matching ME System Tools Package for your system.
(ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
> DOWNLOAD " ME System Tools " packages HERE <

Once downloaded, inside you will find Flash Programming Tool folder, and then inside that a Windows or Win/Win32 folder (NOT x64).
Highlight that Win/Win32 folder, then hold shift and press right click. Choose "open command window here" (Not power shell! >> * See Registry file below *).

If you get an error, reply to this post with a screenshot of it, OR write down the EXACT command entered and the EXACT error given.

((If "open command window here" does not appear, look for the "Simple Registry Edit" below...))

Now you should be at the command prompt.
You are going to BACKUP the factory un-modified firmware, so type the following command:
Command: " FPTw.exe -d SPI.bin "

>> Attach the saved "SPI.bin ", placed into a compressed ZIP/RAR file, to your next post!!! <<

Here is a SIMPLE REGISTRY EDIT that adds "Open command window here as Administrator" to the right click menu, instead of Power Shell
Double-click downloaded file to install. Reboot after install may be required
> CLICK HERE TO DOWNLOAD CMD PROMPT REGISTRY ENTRY <

If the windows method above does NOT work for you...
Then you may have to copy all contents from the Flash Programming Tool \ DOS folder to the root of a Bootable USB disk and do the dump from DOS
( DOS command: " FPT.exe -d SPI.bin " )

---

Hi i've tried your bios @Doomslayer (https://www.dropbox.com/s/pwjhmvd7hf6h88...modded.bin?dl=0) with the g20ci and the i5 9400f but unfortunately i cant boot into windows. im able to get into bios but on the spinning wheel it freezes.

i also attached heatsinks on the VRM.

is the latest bios you did the one on dropbox?

thx for help.

@hasandoel2 - Sorry, I don't know what you need to do on SuperMicro - Maybe @chinobino or @_haru or @dsanke can advise on that.

@creisey - you need to tag whoever you are talking to, if you want quicker reply (@ + user name spelled exact, with no space between, as you see I did here for your name to tag you)

I have no idea about Supermicro either, but if i remember correctly modding them should be possible.

Maybe, do all colors, for best compatibility?

I have tried all color compatibility exactly with the picture, and the results will not light up when installed 9100 U0 (srf6n)

@hasandoel2 - maybe your mod BIOS is messed up? Does your mod BIOS boot other CPU OK?

i use AIO tool and select option no.2 (uo)
success flash bios,and when i put 9100f SEF6N (U0) it doesn't start. cpu fan only turns on then turn off.

but when i put 9100 srf7w (B0), it's normally work and no bug for now.