@Lost_N_BIOS I follow instruction in page 1 but couldn't work around with modded bios on H110 D3A Gigabyte, not with Q-Flash & Efiflash either, could you help?
Bios included

Thx dude so I will try a pencil first than.

---------------------

Hey so I bought a CPU now, but it's r0 stepping. I flashed my BIOS with the p0 Microcode, can I flash Stock bios & reflash a modded one again with r0 Microcode?

Hi! I got this message when modyfing my BIOS https://imgur.com/a/JgGc0if
Why? I flashed the bios skipping the modifications to this vBIOS, everything works, but I'd rather do it again so that everything is as it should be.

Zitat von davidtheking im Beitrag #843

---

Hey so I bought a CPU now, but it's r0 stepping. I flashed my BIOS with the p0 Microcode, can I flash Stock bios & reflash a modded one again with r0 Microcode?

---

Zitat von shadteez im Beitrag #841

---

@Lost_N_BIOS I follow instruction in page 1 but couldn't work around with modded bios on H110 D3A Gigabyte, not with Q-Flash & Efiflash either, could you help?
Bios included

---

Zitat von Lost_N_BIOS im Beitrag #845

---

Zitat von shadteez im Beitrag #841

---

@Lost_N_BIOS I follow instruction in page 1 but couldn't work around with modded bios on H110 D3A Gigabyte, not with Q-Flash & Efiflash either, could you help?
Bios included

---

@shadteez - So, that's a little unclear, are you asking me to make you a mod BIOS? If yes, OK I can do
Please tell me your old CPU model and what is your new CPU model AND it's SSPEC (# off top of CPU)

---

@shadteez - It's OK Good to hear you flashed it finally and are using your new CPU at least
And sorry from me too, if you would have explained that more exact earlier I could have told you how to fix
Here is how to make mod BIOS Q-Flash possible, see post #79 - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)

I reflashed my Mainboard now, my ME Version was downgroaded from 11.7 to 11.6.10.1196 so I guess the flash was successful. I want to mod my CPU now, it says sre11 on the CPU so it's r0. Im still unsure about how to conduct the two CPU-Pins, is a pencil enough for Testing? So I Just draw a thick layer over the two Pins?

Pencil can work, but is the most unreliable method. Just give it a try, but if you get the typical "immediate switch off" try a better method (I jusest conductive silver paint/adhesive meant for trace repairs) before assuming that anything else does not work. As long as you do not connect the wrong pads or soil the socket, you can hardly damage anything by trying SKTOCC mods. (Unlike isolation mods. If these are necessary and done incorrect, they can fry board and/or CPU on first try.)

So I did it like this😬Will test it now, wish me luck

Sadly it doesn't work so I ordered conductive silver on ebay

cbdfdb

Zitat von Lost_N_BIOS im Beitrag #847

---

@shadteez - It's OK Good to hear you flashed it finally and are using your new CPU at least
And sorry from me too, if you would have explained that more exact earlier I could have told you how to fix
Here is how to make mod BIOS Q-Flash possible, see post #79 - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)

---

Zitat von Lost_N_BIOS im Beitrag #847

---

@shadteez - It's OK Good to hear you flashed it finally and are using your new CPU at least
And sorry from me too, if you would have explained that more exact earlier I could have told you how to fix
Here is how to make mod BIOS Q-Flash possible, see post #79 - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)

---

Zitat von davidtheking im Beitrag #851

---

Sadly it doesn't work so I ordered conductive silver on ebay

---

Zitat

---

here are both the bios files, i linked both because you could maybe configure them easier or more optimal if you had a look on both files? I wish that you update the bios like the microcode and whatever possible to latest and remove that pl1 edp constant Throttle( basically raise the power limits and turbo times, i would be really greatful and i think most users of this laptop, beeing power users would be!

---

from what I know, you can't edit the BIOS from an .exe file. This must be a .bin file extracted from your motherboard chip. You can extract it using the CH341A programmer with a special clip. Only after extracting BIOS, you can modify it using the CoffeTime tool. Also, the only way to upload a modified BIOS is through the programmer. Uploading a modified BIOS is not a regular update, so you will not do it from your computer, you must use an external tool which is the previously mentioned programmer.