@chinobino

I have isolated the processor pin according to the picture (red and blue). but when I turn on the power, the processor fan only spins for a while then turns off.

I already used AIO tools and Coffetime and chose U0 as the processor to be installed.

is there anything missing?

@hasandoel2 It could be that ME wasn't downgraded - can you check with another CPU what is actually on the motherboard?

Can you also upload a picture of your padmod on the CPU?

i'm using 9100f B0 (bios f24 mod to B0) its work.
but i'll try to another board with only 2 pinmod.
because its too small,

Hey Bro , Please provide me a image of BIOS chip on Asus Rog Strix z270f Motherboard i download all tool from your side and port bios file to modded bios file I order ch341a programmer + bios chip clip . At last please help me to find Bios chip

@mohitrahar You could possibly be a bit more gracious and appreciative when asking for help from these guys. If you don't have English as native language please go and google up some gracious phrases. It's never nice to almost be demanded to help.

Just saying to help you and make the life here a bit more pleasant for everyone.

Big thanks for this mod tool! I think modding the bios and the cpu went fine. Except I can't seem to downgrade my ME :( I'm still on 11.8

My config: Asus Prime z270-p
8700k

I flashed the bios with AFUWIN64 tool v3.05.04 and the /GAN option.
All is ok as it boots fine with my old CPU and I confirmed the new bios is in. The only thing is it didn't downgrade the ME version.
So I tried flashing again with the same procedure, but now shorting the ALC887 pin1 and pin5 during bios boot. But no luck either. Should I flash the ME separately with another tool?

The MAXIMUS_IX_EXTREME has a bios flash button so do i need to bypass any chips or can i just mod the right version and have it flash the bios for me? If i need to do something extra what would it be?

Also for the CPU isolation and short whats the best way to go about that?

@sander81 - To do pinmod see section "E.1" here, if you have not already (doing the pinmod itself is only one part of the process and only is in effect for that one boot)
[Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing

After doing pinmod and booting, once in windows see spoiler of above linked page, spoiler #2 >> image #2

Dump FD >> FPTw.exe -desc -d fd.bin
Unlock it per spoiiler #2 / Image #2 discussed above
Then reflash >> FPTw.exe -desc -f fd.bin

Then, reboot, once back in windows flash ME region only from your modified BIOS >> FPTw.exe -me -f filename.bin

Get V11 ME System Tools package here, so you are using the correct FPT version.
Intel Management Engine: Drivers, Firmware & System Tools

FPT must be ran from Admin CMD Prompt, or DOS (not Powershell)
Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Win32 folder.
Select that Win32 folder, hold shift and press right click, choose open command window here (Not power shell).

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...creators-update
https://www.windowscentral.com/add-open-...menu-windows-10
https://www.laptopmag.com/articles/open-...ator-privileges

Or here is simply registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required
http://s000.tinyupload.com/index.php?fil...134606820377175

@TechNaOkami: You will not have to look for any special tools as Asus' flashback will try to write whatever you ask for. But it cannot bypass locked regions, so if your FD your ME are blocked you will have to try codec mod or get an external flasher like everyone else. So far Asus 100/200 series seems to be pretty mixed regarding locked/unlocker so you will have to check for yourself.

Updated my microcode to the latest D2 for Coffeelake. Haven't had any problems and like I mentioned previously the CPU no longer has a 100Mhz AVX offset on my Z170 Maximus VIII Formula board.

has anyone been using this method for a long time?

how long has it been and is there a problem?

I have mainboard asus b150 and running cpu g4560 now. I wanna use i3 8100 or i3 9100f, but i don't know HOW TO MOD BIOS ( BECAUSE MY ENGLISH REALLY BAD). Can you help me mod bios main asus b150 run coffe lake i3 8100 or i3 9100f.

I'm really thanks for your help.
Please help me.

INFOMARTION MAINBOARD OF ME

https://www.asus.com/vn/Motherboards/B150-PRO-GAMING-AURA/

LINK DOWNLOAD BIOS 3805 (MY CURRENT BIOS)
VERSION 3805
2018/05/257.71 MBytes
B150 PRO GAMING/AURA BIOS 3805

https://www.asus.com/vn/Motherboards/B15...pDesk_Download/


UPDATE 1: I TRY, AND THIS NOW. IT'S DONE OR ERROR ??? I DON'T KNOW :(. and this log

FILE BIOS DOWN FORM ASUS, I CHOISE THIS ONE TO MOD, BUT WHEN FINISH PROGRAM MOD BIOS, file bios STLL date modifield. ( no change)
https://www.upsieutoc.com/image/MmAQlr
https://www.upsieutoc.com/image/MmAlWm

@life23vn - You need to have flash programmer (like CH341A + U Type Flat IC Extractor - chip puller), or do pinmod (See "E.1", then section B spoiler #2, image 1-2) to unlock FD, before you can use Coffee CPU

Good evening!

I made the MOD for the Asus H110M-K card with the i5-9600kf processor. The card turned on, but when it starts to start Windows, it hangs on the Windows logo. can anybody help me?