I have no problem ordering the CH341A and try. It just gonna take sometime, but I’m curious on the difference it will make. Because I checked on both bios and CPUID and the AFUDOS flashing method seems to be succeed. How do I exactly confirm?

Zitat von Rez im Beitrag #601

---

I have no problem ordering the CH341A and try. It just gonna take sometime, but I’m curious on the difference it will make. Because I checked on both bios and CPUID and the AFUDOS flashing method seems to be succeed. How do I exactly confirm?

---

Zitat von revlaay im Beitrag #602

---

Zitat von Rez im Beitrag #601

---

I have no problem ordering the CH341A and try. It just gonna take sometime, but I’m curious on the difference it will make. Because I checked on both bios and CPUID and the AFUDOS flashing method seems to be succeed. How do I exactly confirm?

---

AFU can not flash the locked area (desc,ME).

---

Zitat von revlaay im Beitrag #600

---

@easlan
@Rez
Use SPI programmer to flash bios.

---

Zitat von Rez im Beitrag #599

---

Tried the silver ink to short those two pins, downgrade my Intel MEI to 11.7.0.1057 but still no dice. The system shutdown immediate after pressing power button.
Any suggestion? @revlaay @svarmod

---

is there anyway to add the xeon v5 v6 to this tool so I can use the xeon on my board
thanks

i think i fixed it.. i never downloaded the update alongside coffee time. after doing that it said the pcie fix was applied. i also did the all core sync as well. eeprom is being flashed now. will edit again if my pci issue is fixed

edited again. works perfectly. 5.1 clock and 1.42v. stable and going well with my 1080ti



ok so i posted a few months ago about doing this.

my bios modding and c341a worked fine. motherboard boots but only displays video without a Graphics card. isnt the allinone.exe suppose to fix that automatically?

i ran a freshly downloaded bios from asus website through the allinone and it does say this now that i look at it more

================================================================
ME Version of BIOS is 11.7.0.1229
ME TYPE of BIOS is Consumer
Chipest Z270
================================================================
Ready Update GOP & VBIOS...
Updating gop...
Updating vbios...
Done!
'"3pcie-patch"' is not recognized as an internal or external command,
operable program or batch file.


is that the issue?

Zitat

---

i have another z270f mobo and found that its firmware is 1009 which is having ME version 11.7.0.1229 , i used the tool but same problem immediate shutdown after pressing power :(

do i have to flash it using spi programmer ?

https://pasteboard.co/Iyc2lE3.png

---

yes you will. i have a asus z270 AR and it needed the c341a. but you MUST check the eeprom manufacturer and model number and input it to the programmer software. the normal software i see people on youtube using only works for 64Mbit chips and smaller. mine was a 128Mbit. so i had to use this spi programmer. https://www.kazmielecom.com/2018/07/27/c...e-download.html (i used the special edition)

how i did it in that program was "read data from chip" "save buffer data to file" "erase chip" "read data from chip" (make sure its empty) "open file" (the bin file your allinone.exe made) "write chip" "verify chip data"

Zitat von c0mmanderX im Beitrag #607

---

yes you will. i have a asus z270 AR and it needed the c341a. but you MUST check the eeprom manufacturer and model number and input it to the programmer software. the normal software i see people on youtube using only works for 64Mbit chips and smaller. mine was a 128Mbit. so i had to use this spi programmer. https://www.kazmielecom.com/2018/07/27/c...e-download.html (i used the special edition)

how i did it in that program was "read data from chip" "save buffer data to file" "erase chip" "read data from chip" (make sure its empty) "open file" (the bin file your allinone.exe made) "write chip" "verify chip data"

---

please please anyone, show me how to add xeon v5 v6 microcdes to this tool so I can use my xeon :)

Zitat von Takeshiro im Beitrag #609

---

please please anyone, show me how to add xeon v5 v6 microcdes to this tool so I can use my xeon :)

---

i used coffeeLake_MOD_Tool_By.revlaay - eng to get i3 9100f U0 on my msi z270a pro.
bios done all automated juzt presing 1 or 2.
flashing and iolatin pins as on schame https://2ch.hk/hw/src/3527903/15538858521071.png
works like a charm easy as taking candy from a child.

Zitat von cromi im Beitrag #611

---

i used coffeeLake_MOD_Tool_By.revlaay - eng to get i3 9100f U0 on my msi z270a pro.
bios done all automated juzt presing 1 or 2.
flashing and iolatin pins as on schame https://2ch.hk/hw/src/3527903/15538858521071.png
works like a charm easy as taking candy from a child.

---

@c0mmanderX
Some file removed or blocked by antivirus, please check the log, add them to whitelist.

i actually didnt patch in the update that came wiht the coffeetime download.

all working now wonderfully on my z270 AR at 5.1 and 1.42v

@revlaay @svarmod @chinobino @_haru

Can Z170N-Gaming 5 BIOS be made compatible with i3-9100F? Sorry to have to ask this, but I haven't really kept up with all these mods and what is now working vs what didn't before etc.
Thanks