I have 1 more question regarding CPU-Z Mainboard check. I still see the Chipset as Kaby Lake after flashing, do I have to put a Coffee chip to the motherboard to change it or I just simply failed to mod?



-I generated modded rom successfully.
-I have no problem when flashing modded rom with afudos (with a normal USB).
To make sure the modded rom installed, I modded Coffee Lake into a newer rom and install it on current old rom, rom version and date changed to the new one.

Zitat von amusasi im Beitrag #541

---

I have 1 more question regarding CPU-Z Mainboard check. I still see the Chipset as Kaby Lake after flashing, do I have to put a Coffee chip to the motherboard to change it or I just simply failed to mod?



-I generated modded rom successfully.
-I have no problem when flashing modded rom with afudos (with a normal USB).
To make sure the modded rom installed, I modded Coffee Lake into a newer rom and install it on current old rom, rom version and date changed to the new one.

---

Has anyone been successful with msi boards? Specifically h270 tomahawk arctic ?
Worked like a charm with my asrock z170
But a friend is keen to try it out
Just getting some info

This is all way beyond my scope of things im comfortable doing. Is there anyone who would be interested in modding a bios for me? I Have an asus maximus IX formula and i have an i5 8600 cpu that id like to run in it just to see if it works but im not savvy enough to do all the modding. If someone ould mod it for me, send it to me and tell me exactly the steps to flashit to the bios i would be willing to do it

if so please private message me thanks

please help

Hey mate I too was worried
But the AIO is literally a press of a button

Then the instructions are way over complicated then. You think you could clarify them for me please? Just a simple step by step of what to do? The way they have it written now looks like there is 5 or 6 steps plus programming eprom ect

Thanks for the reply. I do appreciate it I'm literally brand new to this forum

Download the AIO program
Extract it
Double click the AIO program
Locate your bios version that you have downloaded from the official website
Then you're prompted to choose which CPU you're going to be using
And it does the rest
Put it on usb and flash it like you would any other bios

Thanks a bunch. Yeah that doesn't sound hard at all. Just curious do I need to block any pins or join any together?

Depends which cpu you want to use

I5 8600, sorry, I thought I had mentioned this earlier... I really appreciate your input. I'm really anticipating this endeavor. Really disappointed in Intel regarding this blatant outright thievery. Taking full advantage of their customers after totally ripping them off for years to begin with all because they had no competition in the marketplace. A person like myself I had to save for months to afford my motherboard and just got lucky to end up with an 8th gen CPU only to be told my MB can't run it

Yes you’ll need to do block pins based on the image on page one
Very simple to do
Connect the two pins using pencil
And isolate the other pins using tape

Is there a better more permanent solution I can use other than tape and pencil? I have soldering iron also access to epoxy or something similar or if there is anything recommended I can go purchase I will get whatever I need to do a better more professional job

No idea mate, you're gonna have to ask the pros when it comes to that

Thank you for all your valuable information. I am hoping to be able to get this done in the next day or so time permitting. I'll update you when I make some progress... thanks again