Zitat von Fanplayer1 im Beitrag #358

---

Hello and really thank you for this great utility.

So I tested this software with the latest version of my motherboard to buy a 9900k (Gygabite Gaming 5 z270x).

I would like to test this bios before buying it. Can you confirm that this will work at first with my 7700k ?

Can you confirm that the HT 9900k will be fully functional with my motherboard ?

I do not think the utility of my motherboard accepts the bios as an update is there a utility to flash the bios ?

Thanks in advance and really sorry for my english =)

---

I used CoffeTime + clean_me (11.7.0.1229) to get an endless reboot, I couldn’t restore the working bios using the ASUS USB Flashback, only the programmer helped to restore the motherboard.
I think it is important to know.

Thank you for your answer but I think I have succeeded with this moddé utility Flashing Gigabyte while avoiding "Invalid BIOS image"

I check the version of intel me with this program https://downloadcenter.intel.com/downloa...-Detection-Tool and it tells me the version "11.7.0.1229" Off the version original of my bios is "11.8"

I can buy a 9900k without problems with this bios ?

Zitat von Fanplayer1 im Beitrag #363

---

Thank you for your answer but I think I have succeeded with this moddé utility Flashing Gigabyte while avoiding "Invalid BIOS image"

I check the version of intel me with this program https://downloadcenter.intel.com/downloa...-Detection-Tool and it tells me the version "11.7.0.1229" Off the version original of my bios is "11.8"

I can buy a 9900k without problems with this bios ?

---

Thanks to you shikulja, I followed step by step what you tell me and coffeetime tells me this.


So I think that's correct.

To achieve the "pinmod" what can I use without losing the warranty ?

Zitat von Fanplayer1 im Beitrag #365

---

Thanks to you shikulja, I followed step by step what you tell me and coffeetime tells me this.


So I think that's correct.

To achieve the "pinmod" what can I use without losing the warranty ?

---

@Doomslayer - here is your mod BIOS back, with now boot logo disabled by default, and you can enable/disable it now too if you want @ Boot BIOS Page
http://s000.tinyupload.com/index.php?fil...941662071869255

Zitat von Lost_N_BIOS im Beitrag #367

---

@Doomslayer - here is your mod BIOS back, with now boot logo disabled by default, and you can enable/disable it now too if you want @ Boot BIOS Page
http://s000.tinyupload.com/index.php?fil...941662071869255

---

@Doomslayer - you're welcome! Let me know if it doesn't work, but I think it should now be disabled by default, and you should be able to adjust the setting yourself now too.

@_haru or @svarmod will be able to answer you on the 9900K CPU question I bet. YOu may just need to make a ME edit, or swap BIOS setup regions (Along with AMITSE and AMITSE/SetupData)

Zitat von Doomslayer im Beitrag #368

---

Zitat von Lost_N_BIOS im Beitrag #367

---

@Doomslayer - here is your mod BIOS back, with now boot logo disabled by default, and you can enable/disable it now too if you want @ Boot BIOS Page
http://s000.tinyupload.com/index.php?fil...941662071869255

---

Thank you for your help. I greatly appreciate it.

is there any guide how to porting bios from another board? by porting my h270 bios from H370 bios, is there any possibility to succesfully run i9 9900k (16 threads) on my G20ci(h270)? thank you

---

@Doomslayer

Your best bet at getting it working is the software this thread is about. But as some others have said, H270 and H370 are totally different, so you are actually better off tricking it into thinking you have Z370.

Zitat von _haru im Beitrag #371

---

@Doomslayer

Your best bet at getting it working is the software this thread is about. But as some others have said, H270 and H370 are totally different, so you are actually better off tricking it into thinking you have Z370.

---

Hello everyone I come to the news.

I did the pinmode isolating the red / yellow / blue color of the image of coffeetime (I did not make the short green).

I mounted the processor and I set it to 5ghz@1.295v and I have 0 bsod for the moment.

The only problem I have is that my optane module does not work anymore since the change of CPU, it is detect but can not be paired with my hdd (error 0xA008002D).

Is there a way to solve the problem ?

Did you disable Optane before you swapped CPU? If not you may need to uninstall and reinstall the RST/Optane software and reconfigure it, wiping any previously cached data on it. If that does not work then disable RST Premium mode in BIOS save, exit, then re-enable it to clear any corruption.

What size optane module did you have? If it was 32GB or larger and you had pinned apps do any of them still work?

I just tried a clear cmos and a reinstall of Windows but it does not work unfortunately.

I think the problem comes from the bios, is there a way to correct?