looking for modded bios for my laptop clevo p770zm please any help out here????

See this thread - Accessing Locked BIOS Menu Settings (5)

Hi. I also need an unlocked version of Bios. I own a Schenker XMG U705 (that is Clevo P771ZM, like the sticker on the back states). My previous Bios version was a stock Bios that I updated/flashed from this link http://forum.notebookreview.com/threads/.../#post-10238079. It was an AMI 1.03.15 stock Bios that a later flashed with an older unlocked version that I found on this site (AMI 1.03.14 5/13/2015). It is fully unlocked version, but being older version, my boot time has slightly increased. So, any help with new unlocked version would be much appreciated. (some instructions would also be nice, because I'm a total and complete NOOB, my expertise lie somewhere else ;) ).
PS: Excuse my bad English.

@Sayo - please link me to the stock BIOS download for the BIOS you want used. I want the stock BIOS link from the manufacturer, so I can see what all flashing tools come with the stock package.

This is my last stock BIOS: https://mega.nz/#!K4UUACbZ!2fLNODdq2t5Qi...5M5V587DlJq0qTg
Thank you very much.

Please see my post above #5 - I didn't try to download that file yet, Mega.NZ always a pain for me, but maybe that's not what I wanted anyway.
Do you not have a manufacturer BIOS download page/link? If not, is the above a complete package, not touched, extracted etc by you, has stock BIOS flash tools, batch files etc?

Clevo doesn't offer BIOS for P770ZM/P771ZM anymore. I'm not sure if this BIOS was tampered with (I didn't for sure), I only know that it worked great. What do you want me to do and how I'm I supposed to send you this Bios file?
PS: Inside the folder there are multiple files: AFUDOS.exe, ERROR.LOG, FLASH.bat, flashme.bat, fparts.txt, fpt.exe, GMSDM.exe, MAC.TXT, Meset.EXE, OAIDDOS.EXE, P770ZM.15, P770ZM8M.15, readme.txt and yes.txt.

If that is all we have as base BIOS, OK, but then no BIOS tools so I can't help you to flash mod BIOS if there is some issue we need to work around. That's why I wanted the package, so we could see stock BIOS packaged flashing tool/method etc.
Please upload to tinyupload.com, at least there I know I can download without issue. Hey, great, I didn't notice until end of typing this out that you mentioned the stock tools to flash are in there, good! Sounds like stock package, hopefully it's untouched BIOS too.

Since I see FPT there, this is best way to mod BIOS! Please follow along and do below. Before you do this, please be sure to update to the latest BIOS, so you are on the new one and not old BIOS


Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version.
Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
Intel Management Engine: Drivers, Firmware & System Tools

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

Right after you do that, try to write back the BIOS Region dump and see if you get any error, if you do show me image of the command entered and the error given >> FPTw.exe -bios -f biosreg.bin
^^ This is important step, do not skip ^^

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...creators-update
https://www.windowscentral.com/add-open-...menu-windows-10
https://www.laptopmag.com/articles/open-...ator-privileges

Or here is simply registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required
http://s000.tinyupload.com/index.php?fil...134606820377175