Zitat von maarten12100 im Beitrag #600

---

I recently got this board and upon installing a single QL1M ES it shows the same behaviour reported by others:
Boots directly on power on, Q code 00.

This is with the bios flashback done and I even did the flashing again with the SPI programmer no difference.
I also played with the rtclr, ME recovery and PCH manufacturing jumpers but it has made no difference.
I found on a different single socket Asus 3647 board that Q code 00 code was being caused by the board being cold, this was described in the negative reviews on amazon.

The bios seem to work fine for some and not at all for others. The people that do have a working system with ES procs could you tell me what revision is on the silkscreen of your motherboards. I personally have Rev 2.00.

---

Hi to All,
I was able to install Gentoo Linux on This MoBo with 2 CPU Xeon Platinum 8176 ES.
but still I'm not able to install Windows, may be is a wrong config in the modded BIOS?
I think Windows needs UEFI to Boot properly. And disable CSM, but if I disable CSM the MoBo doesn't boot and make a lot of "beep" some sort some long.
Please can anyone help me?
thanks
Gutigno

@Airo, I have a problem with BIOS MOD 6605 if I disable CMS the system doesn't boot, I would try to flash 5503 MOD BIOS could you share this MODDED BIOS Version Please?
old links didn't work.
thanks
Gutigno

@Gutigno

https://www38.zippyshare.com/v/lMNBgWIv/file.html


If you are able to enter the bios menu with 6605 and it doesn't boot into your OS than my guess is you have to make changes to your disk partitioning

Thanks a lot @Airo tomorrow i’ll try with 5503 bios and let you know. Now i passed to xubuntu 21.10. Simpliest than gentoo to manage. Ad hard disk i have an nvme m2. Xubuntu works good. But i’ll would try to install Windows too maybe i made some error in bios config. The stringe thing is that ì disable csm the system doesn’t boot. I’ll try tomorrow with 5503. Bye Gutigno

@Gutigno


5503 modded https://www64.zippyshare.com/v/0KQwnU9u/file.html

You don't need to flash the 5503 bios because your issue has to do with disabling CSM and by doing that enabling UEFI. The problem is most likely that your partitions are not GPT .

https://www.maketecheasier.com/differenc...-uefi-and-bios/

ok, I'll try to remove nvme drive and make some probe with a sata drive with GPT partition.
Thanks,

Zitat von Airo im Beitrag #606

---

@Gutigno


5503 modded https://www64.zippyshare.com/v/0KQwnU9u/file.html

You don't need to flash the 5503 bios because your issue has to do with disabling CSM and by doing that enabling UEFI. The problem is most likely that your partitions are not GPT .

https://www.maketecheasier.com/differenc...-uefi-and-bios/

---

I tryed to disable CSM and remove video card I have the same situation, maybe I have an unsupported GPU in this System without CSM
I red some thread on web and maybe the issue is this
thanks a lot to All.
this evening my friend give me a newer GPU and tomorrow i'l try to solve the issue-

the MoBo BIOS Code when it stops is AB - Setup Input Wait.

@Gutigno



Hi, the share I posted is working fine.

What I propose you do is to get a SATA SSD and wipe this disk completely, than remove the M.2 SSD so you have only the sata connected, now turn the machine down, unplug power and Clear RTC RAM with the jumper CLRTC1.
Also for the sake of it, check if the jumpers on your motherboard are set to there default accordingly to the manual.

Than powerup, disable CSM and see what happens.

I posted this tip before, try this!

For those who have a shitty browsing experience, use Firefox and add the following add-ons:

AdGuard AdBlocker
Decentraleyes
Disconnect
Ghostery – Privacy Ad Blocker
HTTPS Everywhere
Privacy Badger
Privacy Possum
I don't care about cookies

I tried to do what we decided last week but the PC worked only few minutes, than I gat 00 Q code and the system doesn't post, and a red light on in the center of MoBo, so I think something is Brocken may be CPU or MoBo, I'll try to put the same CPU on my SuperMicro X11DPH-i and no post, no beep only black screen.
in this MoBo I have bios 2.1. I sow on Internet with this Version the ES CPU should work.
I'm afraid, so today I send back the CPU to the seller. Next days I'll try to buy a different CPU and try again with both MoBo.
thanks a lot to All for the support.
bye
Gutigno

Hi guys,
I have a asus Pro WS C621-64L SAGE. And bought a cpu p-8163. But seems the bios does not support the cpu.
From this thread and ebay site i understood the bios needs to be patched to allow boot up on the cpu.

Asus: WS C621E SAGE, Pro WS C621-64L SAGE/10G, ROG Dominus Extreme motherboards (modded BIOS with a microcode patch required***)
See post #459
Cpuid code what i saw 00050653.

Can anybody help me on getting this cpu running on the board ?