Hello.

Having this issue. It has original mobo and cpu and still shutting down.
Can somebody tell me what to do? Thanks.

Did you clean the Management Engine?

No, how to do that?

I´ve try to search but i dont understand.

Maybe due to a bad bios flash.

I mean how to clean management engine?

Cleaning ist not needed. I just asked if you did that cause that´s the only reason I remember, when a computer shuts down 30 minutes after booting. And this can happen due to a bad bios flash.

Ok thanks will try this tomorrow.

Sorry but cant find download link for MEInfo tool. Also dont know how to use Flash Descriptor. Im noob.

Heres my chipset. http://kuvanjako.fi/zleps.png

MeInfo is in Intel System tools package as linked above by plutomaniac, you may need to download both 9.1 and 9.5 packages because I cannot tell what ME you have, drivers are 9.5 but that doesn't always mean ME is same or similar
Intel Management Engine: Drivers, Firmware & System Tools

Intel ME drivers have to be installed before meinfowin will work, from the Asus download page for your system. You may need to try version in 9.1 package, then 9.5 package

Here is how to check about flash descriptor, you will use tools from above downloads
[Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing

I´ve downloaded this https://downloadcenter.intel.com/downloa...-and-Windows-10, but when i try to install it says "This enviroment is not supported"

You have to download the ones from your asus download page - https://www.asus.com/Laptops/X550LB/HelpDesk_Download/

There was driver only in Windows 8 section and it gives error when i try to install it.

Btw should there be Intel management driver in device manager?

It will not appear in device manager until you install drivers, then it will be in "System Devices"

You might need to install in compatibility mode, or I am not sure? It's in the BIOS though, I checked the change logs, but was not able to verify it's location in BIOS to find version
I checked the Intel link you provided, and it shows only compatible with CPU's other than the one you have (Haswell) Try to find one on Intel that's compatible with Haswell.

Your ME might be messed up, corrupted, as mentioned above. Does it show ME version in the BIOS? Check the text F7 BIOS too if you have GUI type BIOS.

You can run the DOS versions without drivers, try both 9.1 and 9.5 and if you get errors take image or write down and post them here.

Cant find anything Me related in bios.

I run the MEInfo 9.5 and it gives me this "Communication error between application and Intel(R) ME module (FW Update client)"
MEInfo 9.1 gives this "Error 9460: Unknown or unsupported hardware platform"

How to run the Dos versions without driver?

I checked my other 4 computers and they all have Intel Management Engine in system devices allthough i have never installed any drivers for them.
So Windows 10 must install them in the first place. Is my cpu broken or something?