Were you able to change the microcodes using UEFITool? I use the NE 56 version of UEFITool and I have all the time a grayed option "replace body".
I'm trying to boost E5-2695 v3 ES (in the Intel's Ark base the same as e5-4660). Have you solved your problem yet?

@andyvonshick - If you want to update microcodes via UEFITool you have to use version 25 or 26, extract microcode body and then edit (look at bottom of file first, to check if there is a footer, if you see it there then be sure to put back once done if you extend the length)
Also, depending on BIOS, you may need to correct FIT table if you edit the microcodes >> [GUIDE] Update CPU Microcode + Fix FIT Using UEFITool / Hex

If you need mod BIOS let me know, be specific on what you need done and I will do for you.

Hello. Removed the microcodes, added the DXE driver, but the turbo boost will not unlock. If manually load v3x4-0.10b-i306f2-rc9.efi via the UEFI shell, the turbo boost will unlock.
My system: Supermicro X10DAi, 2 * Xeon 2683 v3.
What did I do wrong?

And the second question.
I looked at the code v3x4.c.
Here are the lines that set the ratio limit

//region 1
// IA Core ratio limit
if (CPU_SET_MAX_TURBO_RATIO > System->Package[ThisPackage].IACore.MaxRatio) {
System->Package[ThisPackage].IACore.RatioLimit = System->Package[ThisPackage].IACore.MaxRatio;
}

if ((CPU_SET_MAX_TURBO_RATIO < System->Package[ThisPackage].IACore.MinRatio) \
&& (CPU_SET_MAX_TURBO_RATIO != 0)) {
System->Package[ThisPackage].IACore.RatioLimit = System->Package[ThisPackage].IACore.MinRatio;
}

// region 2
if (CPU_SET_MAX_TURBO_RATIO == 0) {
System->Package[ThisPackage].IACore.RatioLimit = System->Package[ThisPackage].IACore.MaxRatio;
}
else {
System->Package[ThisPackage].IACore.RatioLimit = CPU_SET_MAX_TURBO_RATIO;
}

If I understand correctly, then "region 1" does not make sense since in "region 2" RatioLimit is being rewritten depending on the value of CPU_SET_MAX_TURBO_RATIO.
What is the meaning of "region 1" code?

@Lost_N_BIOS Hi,

can you help me with BIOS? I have Supermicro X10SRA-F mobo with a sweet 2687w v3 monster on it.

I've been trying to import a v3x4 driver, to clean ME FW, unlock menus and tried to get rid of annoying 95.2Mhz (wtf is this shit!? Spreadspectrum is disabled.) BCLK. Well, without any luck.

If you will be able to help me that will be much appreciated.

Here is link to the bios file:
https://www.supermicro.com/about/policie...wareItemID=6671

P.S: I have a flash programmer so it's not a prob to me to revive a brick.

Hey Guys.
today i have done my Huananzhi X99-TF motherboard V3 Turbo and i decide to share all my content in this forum.
The configuration that i use is:
Huananzhi x99-TF V5.11
Intel Xeon 2680v3 12c/24t 3.3ghz all core turbo

------------------------------------------------------------------------------------------------------------------
if you have a Huananzhi x99-TF and you want to do all core turbo mod on Xeon V3
This Bios mod dont need microcode inside, and you can run Xeon V3 mod on windows microcode:
Huananzhi x99-TF V5.11 motherboard READY TO FLASH

------------------------------------------------------------------------------------------------------------------

what is inside?
this is the same MOD that i find on win raid GUIDE with update to work with New Chinese Motherboard

------------------------------------------------------------------------------------------------------------------
How to flash X99 with winbond 25Q128 ?
25Q128JVSQ Huananzhi x99-TF

here is the EEprom Programmer:
ch341a 24 25 séries eeprom flash bios usb programador módulo + soic8 sop8

here is the software:
CH341 Programmer 25Q128 From X99 Motherboard



------------------------------------------------------------------------------------------------------------------

How to flash X99 with winbond 25Q128 by windows Live Flash?

Huananzhi x99-TF V5.11 FLASH WINDOWS 10

------------------------------------------------------------------------------------------------------------------

Hello friend great content, recently got this card Huananzhi x99-TF and cpu 2678v3 would it be possible to enable all core turbo?

Ps: sorry my english i am using google translator

it´s possible, and i have done this week see my tutorial

@Enraiha - you have noted several issues/things there, all very different and not related at all. 95.2 is due to ME FW and it's settings, sometimes nothing you can do but adjust Bclk to compensate, or try other ME FW versions
There is so much there, you really need to make your own thread, then I can help.

i recently bought this board to use with my 2697v3
so excited to do this mod over the weekend!
i will post my result !

https://forums.anandtech.com/threads/wha...1#post-39872393

I asked in the anandtech forum before
Add "v3x4-0.10b-i306f2-rc9.efi" to ffs and add to bios
But nothing works
May I ask you the detailed steps to convert to ffs? Thanks :)

@raun0

@jordanpchome - ffs attached to post one already, and detailed guide to convert efi to ffs linked in post one as well (search "pbatard's efifs" and you will find it)

Zitat von Lost_N_BIOS im Beitrag #26

---

@jordanpchome - ffs attached to post one already, and detailed guide to convert efi to ffs linked in post one as well (search "pbatard's efifs" and you will find it)

---

Zitat von jordanpchome im Beitrag #25

---

@raun0

---

@jordanpchome - I know nothing about this mod, or how it works, only what I see posted on page one.
I checked your BIOS, v3v4rc9 looks to be in correct place, but I see you still have microcodes in this BIOS (#1 requirement in guide is to remove microcodes)
Do you need someone to remove them for you, or did you miss that step? If you need me to do it, please attach or upload a stock unedited copy of this BIOS so I can see BIOS before you edited anything.

@raun0 - per your step #2, removing ALL microcodes - Is that necessary, or can you simply remove the microcode per the CPU you plan to be using? Such as CPUID is 306F1, can you just remove 306F1, or do you have to remove all microcodes?

Thanks for your clarifications, I'm surprised no one has asked this yet!

Hi there I was wondering if anybody has made or can make this for the Asus x99 sabretooth tuf motherboard? I had a look but im not so good at bios editing!