Try to flash SPI result with error
Error: faild to disable write protection for the bios space
Unable to perform write operation

Result of meinfo
Meinfo -verbose
Trying to initialize heci...
Error 9250 heci connection to the intel amt PTHI client failed

I wanna thank you very much for your time and wish you all the best
I'm gonna use it like this till I buy new one soon maybe 😊
Thank you again 💙

@KwaShaKos - Jumper must be on when trying to write SPI.bin (Unless you use command >> FPT.exe -bios -f -spi.bin) If still error with that command, and you get similar error with jumper on, just use the stock installer to install latest BIOS again (That is the goal of this flash anyway, since you already rewrote FD and ME)

To run MEInfo do from DOS, and for this jumper must be removed.

i already installed the stock BIOS
It's running well without any error
but still no way to update ME :(

Yes, but still issue, so you should redo BIOS region with FPT, in case normal flashing tool is missing something. It's not running well if you are having issue still. The ME does not need updated, the latest is already flashed in, it needs fixed and that could be on BIOS side too.

I see
Ok, I'm now out of city and when come back I will try it again and come back here with result

While you are out, or anytime, order a flash programmer and test clip cable, it's cheap but long wait for delivery. Then you never have to worry about BIOS issues again, for any motherboard.

I will buy it sure

Again I tried to flash SPI fix using fpt from dos but not working. Is there any setting in bios I have to change before I can flash it
Or just installing the stock bios is enough after flashed the three commands well from fpt "FD - ME - greset"?

Meinfo not working both jumper on or off neither dos or windows versions

Yes, you can just flash stock BIOS, FPT not needed for reflashing BIOS. YOU can't flash FD with FPT, it will be locked.

MEinfo will only work once ME is working and healthy, and ME drivers are installed. Jumper must be removed for ME to be functional. Jumper on only when you want to either disable ME, or reflash ME via FPT
You have done all you can for now, stop messing with it before it bricks on you. Wait for programmer, then you can fix

Thank you very much

I mean by "FD ME greset" the three bin files you asked me to flash with fpt with jumper on. The files that I made short name for them

I assumed so, you can flash FD (I think) and ME (For sure) with jumper on. ME will only be functional with jumper removed.
You can flash BIOS region without jumper on, either via FPT or via stock BIOS update package, but probably best to use FPT in case stock package tries to update ME again