Thank you for the explanation. I am not using RAID. Could you please mod the BIOS and leave the original RST?

@Phoner - great, then no RAID module edit needed and you don't have to decide any of that Use V11 drivers if you do install the Intel RST drivers for any reason.
Here is BIOS with changes as shown using UBU as a before/after way to easier show the update info, updated BIOS on right side.
Unlocked FD, NVME Mod, Updated ME FW to latest + EFI GOP / oRom vBIOS, EFI/oRom PXE/LAN All, Marvell, All uCodes


http://s000.tinyupload.com/index.php?fil...963696160063820

Perfect! Thank you for your help!

You're welcome! Flash with USB Flashback only, sorry I didn't mention before!
For FD/ME to get flashed in you will need to do pinmod or special dances

Special dances? What do you mean?

Zitat von Lost_N_BIOS im Beitrag #77

---

@Phoner - great, then no RAID module edit needed and you don't have to decide any of that Use V11 drivers if you do install the Intel RST drivers for any reason.

---

Hallo everybody,
Glad to join this forum.
I have an old rig but still the beast. It is I7-3770k, dance with P8z77V Pro. And Now, i upgrade its performance with adata NVME, best value/performance in my town. Special thanks to lost n bios to help me, make it works.

This is exactly the steps what i^ve done.
1. Make a bootable windows 10, with windows mediacreationtool.
2. download the file in #16 and delete ".rom" extension manually and put that file in clean formatted USB.
3. plug that usb in usb biosflashback female, located in rear panel (special for bios) and push the bios flash botton (in mobo) until it stop blinking. Than unplug that usb.
4. Unplug the power cable, push the power button to drain excess electricity. Remove all drives, except the bootable USB and NVME and plug the power cable back.
5. Enter the bios and do the sub steps:
- disable fast boot.
- enable csm and set the bios device control as uefi and legacy
- set secure boot as other OS
- set bios option1 as uefi (bootable usb) save this settings and restart.
6. Enter the installation mode and Install fresh windows 10. Make sure you formatted the NVME in single drive and wait until finish.
7. Set the bios back:
- turn on fast boot
- set boot option 1 as Windows boot manager (nvmr drive)

Thats it. (im so sorry for my english)

Hi. @Lost_N_BIOS Could You please make a modded BIOS for ASUS P8Z77-V contanining all newest modules and drivers along with latest microcode updates using latest official BIOS 2104 (https://www.asus.com/Motherboards/P8Z77V/HelpDesk_BIOS/) ? Would be very gratefull ;)

@heinerle - Do you still need, or you got it now? No, NVME Mod universal, if you get Samsung you can use other module but you don't have to.
FD unlock is only useable if you have flash programmer, otherwise, unless you pinmod (E1 on same page about to be lined) the board you can't flash it in.
Here is method, see second spoiler, first or second image - [Guide] Unlock Intel Flash Descriptor Read/Write Access Permissions for SPI Servicing

vBIOS, use UBU, but I think you still haev to use this guide and edit/mod your own vBIOS files (it's involved)
[Guide] Transfer of specific Intel OROM VBIOS and GOP VBT settings by using Intel BMP tool

@izajasz - this why SoniX made UBU tool, did you know about this and already try or not? If you do not use RAID no need to update RST
[Tool Guide+News] "UEFI BIOS Updater" (UBU)

Wow, I didn't know about this tool, thank you very much. Where can i find UEFI gop drivers, vBIOS'es and microcodes ?

@izajasz - You're welcome! vBIOS are in the thread I linked above (about BMP tool, which must be used with vBIOS to update this module before putting into UBU folder), GOP and microcodes are already packaged with UBU

Zitat von Lost_N_BIOS im Beitrag #86

---

@izajasz - You're welcome! vBIOS are in the thread I linked above (about BMP tool, which must be used with vBIOS to update this module before putting into UBU folder), GOP and microcodes are already packaged with UBU

---

Hi,

Is this version (in the post #23, regarding P8Z77-V; non Pro version) packed with microcode updates?
If not, could you make one with all microcode updates?

Thanks a lot for your service. I appreciate it.

@Jeans - good to hear a clean install sorted that issue out for you. While reading your comments I was about to say send the NVME drive back sounded faulty, but happy to see it was some OS install issue and it's now fixed.
Don't use IDA mode! AHCI always. I'd RMA the drive, it doesn't sound like it's working properly possibly. Have you tried moving the PCIE adapter/NVME to another slot?

@tensor77 - No, that is stock 2104 BIOS + NVME Mod only. You're welcome. Here is new that BIOS + all microcdes updated to latest


http://s000.tinyupload.com/index.php?fil...584111386629524

Thanks for the reply!
I followed your advice and switched PCI-E slot with my graphics card. I then tried to install the programs that I couldnt before. Samsung magician worked like a charm (latest version this time) but I still have issues with logitechs software. I'll just skip that program and hope for the best in the future, thanks again!