Yeah, thanks, that LAN MAC is part of the numbers shown for UUID in the above apps too. I'll get it sorted, or verified that it's all in there correct already now.
Almost have BIOS for you, wrapping up now

Once you flash this, run Intel Flash Programming Tool with command fpt.exe -greset or fpt64.exe -greset and wait for the system to reset (no settings are lost).
Or if you are programming it with a flash programmer, I think maybe just remove CMOS battery and main battery + power supply connection, before programming if leaving the chip soldered to the board.
Then remove flash jump cable and leave all the power + batteries disconnected for one minute after.

Everything in BIOS was correct still, except LAN MAC. That is fixed now, and clean ME put back in along with updated CPU microcodes
BIOS attached

Thank you very much

Here is new one to try. This one is built from your latest dump you sent or linked me to (modbios).
This only has unlocked FD and fixed MAC, with the clean ME, no added microcodes - make sure this is put on with USB flash programmer and not flashed with any BIOS tool like FPT or AFU or asus tools etc.
since FD was locked for FD and ME in last SPI image you uploaded it needs to be put on by programmer

My laptop wont turn on and i cant detect bios chip in flash programmer

Still from this morning, same? If so, then your BIOS chip is shorted out or fried etc. and will need replaced probably.
Did you see or smell the magic smoke at anytime while jumping the BIOS to program? Or while putting laptop back into starting order so you could test?
Something had to short, or is still shorting, somewhere, that can't happen from flashing BIOS really even if terribly corrupted or wrong board BIOS etc
You could get corrupted BIOS or stuff like that, but non-detection of the rom and no reaction from power on button sounds like something is shorted now or was in the past and fried/shorted out something

Near the bios a litte chip is fat,mb was fried 3 years ago.

Post an image lets see. Can you solder?
How was motherboard fried 3 years ago, and how did you fix it back then?