Forum - RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem

#31 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 3:11 pm (Last edited: Sat Apr 12, 2014 3:18 pm)

Show info

Posts:	18785
Registered since:	04.27.2013
Location:	Germany

Zitat von espace13 im Beitrag #30
is there a chance/possibility you make newer/updated "Universal modified" Intel RAID driver ?

They are already available within the start post of >this< thread.

Example
The "32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by Fernando" do support the followig HardwareIDs:

A. Intel SATA AHCI Controller:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
 
%PCI\VEN_8086&DEV_27C1&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_27C1&CC_0106
%PCI\VEN_8086&DEV_27C5&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_27C5&CC_0106
%PCI\VEN_8086&DEV_2821&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2821&CC_0106
%PCI\VEN_8086&DEV_2824&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2824&CC_0106
%PCI\VEN_8086&DEV_2829&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2829&CC_0106
%PCI\VEN_8086&DEV_2922&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2922&CC_0106
%PCI\VEN_8086&DEV_2923&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2923&CC_0106
%PCI\VEN_8086&DEV_2929&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2929&CC_0106
%PCI\VEN_8086&DEV_3A02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3A02&CC_0106
%PCI\VEN_8086&DEV_3A03&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3A03&CC_0106
%PCI\VEN_8086&DEV_3A22&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3A22&CC_0106
%PCI\VEN_8086&DEV_3A23&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3A23&CC_0106
%PCI\VEN_8086&DEV_3B29&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3B29&CC_0106
%PCI\VEN_8086&DEV_3B2F&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3B2F&CC_0106
%PCI\VEN_8086&DEV_3B22&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_3B22&CC_0106
%PCI\VEN_8086&DEV_1C02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_1C02&CC_0106
%PCI\VEN_8086&DEV_1C03&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_1C03&CC_0106
%PCI\VEN_8086&DEV_1D02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_1D02&CC_0106
%PCI\VEN_8086&DEV_1E02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_1E02&CC_0106
%PCI\VEN_8086&DEV_1E03&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_1E03&CC_0106
%PCI\VEN_8086&DEV_8C02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_8C02&CC_0106
%PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_8C03&CC_0106
%PCI\VEN_8086&DEV_9C02&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_9C02&CC_0106
%PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_9C03&CC_0106
 

B. Intel SATA RAID Controller:

1
2
3
4
5
 
%PCI\VEN_8086&DEV_27C3&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_27C3&CC_0104
%PCI\VEN_8086&DEV_27C6&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_27C6&CC_0104
%PCI\VEN_8086&DEV_2822&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2822&CC_0104
%PCI\VEN_8086&DEV_282A&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_282A&CC_0104
%PCI\VEN_8086&DEV_2826&CC_0104.DeviceDesc% = iaStorA_inst, PCI\VEN_8086&DEV_2826&CC_0104
 

The only problem is, that there is no TXTSETUP.OEM file for these actual Intel RST(e) drivers versions. That means, that you will not be able to successfully integrate any of these actual Intel AHCI/RAID drivers into a Windows XP CD, but you may be able to create a Bart PE CD by using them.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#32 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 3:31 pm

Hello Fernando,
!!! THANKS !!!
I was not aware of this NEW version, since I have created BartPE cd a few month ago
I will use be happy to use:
"32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by Fernando"
to create NEW BartPE cd - this is my primary objective
And yes, I am aware, I can not create XP cd since there is no appropriate TXTSETUP.OEM file
Once again THANK YOU VERY MUCH for your time and explanations !
Best regards,
espace

reply

#33 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 3:36 pm

@ espace13:

If you should succeed with the creation of a working Bart PE CD by using this modded Intel RST(e) driver v12.8.11.1000, I would rather like to test it myself.
So it would be fine, if you give me a link via PM.

Regards
Fernando

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#34 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 3:44 pm

Hello Fernando,
Of course, if I manage to create a working Bart PE CD by using this modded Intel RST(e) driver v12.8.11.1000 i will gladly give you a link via PM.
Regards,
espace

reply

#35 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 4:56 pm

Hello Fernando,
with this drivers creation of Bart PE does not seem to work.

start segment of Pebuilder log file (for BartPE) regarding RST:
Section: SourceDisksFiles
Processing INF file "C:\pebuilder3110a\drivers\SCSIAdapter\32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by
Fernando\iaAHCIC.inf", class "HDC", provider "Intel Corporation", version "12/11/2013"
Adding file: iaStorA.sys
Adding file: C:\pebuilder3110a\drivers\SCSIAdapter\32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by Fernando\iaAHCIC.inf
Processing INF file "C:\pebuilder3110a\drivers\SCSIAdapter\32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by
Fernando\iaStorAC.inf", class "SCSIAdapter", provider "Intel Corporation", version "12/11/2013"
Unsupported device class: SCSIAdapter
Don't worry pebuilder will use: txtsetup.oem
end of log segment regarding RST

in created NartPE cd there are iaStorA.sys and iaStorAC.inf but since txtsetup.oem does not exist, reference to intel RST drivers are not included in TXTSETUP.SIF
so this cd would not work

Any idea? - thanks for your time
Regards, espace

reply

#36 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 5:00 pm

Zitat von espace13 im Beitrag #35
in created NartPE cd there are iaStorA.sys and iaStorAC.inf but since txtsetup.oem does not exist, reference to intel RST drivers are not included in TXTSETUP.SIF
so this cd would not work

That is a pity!

Zitat
Any idea?

Maybe I will try to create a TXTSETUP.OEM myself.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#37 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 5:08 pm

Hello Fernando,
it would be great if you could create a TXTSETUP.OEM
please let me know if/when you make it - thanks in advance
I would then gladly try to create new BartPE cd
Regards,
espace

reply

#38 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 7:13 pm (Last edited: Sun Apr 13, 2014 12:38 pm)

Zitat von espace13 im Beitrag #37
it would be great if you could create a TXTSETUP.OEM

Here is the complete test package of the modded 32bit Intel RST(e) driver v12.8.11.1000 inclusive self-made TXTSETUP.OEM.
I would be very surprised, if it really should work. The problem is the SCSI filter driver named iaStorF.sys, which will not be loaded by using this TXTSETUP.OEM file.

Please report, if you are able to get a working Bart PE CD by using this driverpack.

EDIT: The attached file has been deleted, because there was a mistake within the TXTSETUP.OEM.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#39 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 7:34 pm

Hello Fernando,
This was very extremly fast !
seems that with your self-made TXTSETUP.OEM BartPE should work:
using driver v12.8.11.1000 inclusive self-made TXTSETUP.OEM
here is what is in CD
in:
\I386\INF
there is IAAHCIC.INF
in:
\I386\SYSTEM32\DRIVERS
there is:
IASTORA.SYS
in TXTSETUP.SIF which is in:
\I386
there are this lines associated with Intel storage:
PCI\VEN_8086&DEV_27C1&CC_0106="iaStorA"
PCI\VEN_8086&DEV_27C5&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2829&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2824&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2922&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2929&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2923&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A22&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A23&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B29&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B2F&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B22&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1C02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1C03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1D02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1E02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1E03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_27C3&CC_0104="iaStorA"
PCI\VEN_8086&DEV_27C6&CC_0104="iaStorA"
PCI\VEN_8086&DEV_2826&CC_0104="iaStorA"
PCI\VEN_8086&DEV_2822&CC_0104="iaStorA"
PCI\VEN_8086&DEV_282A&CC_0104="iaStorA"

what do you think?
Reagards,
espace

reply

#40 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 7:45 pm

Hello,
when I have compared your latest drivers and the one I used in my original BartPE with drivers also from you in TXTSETUP.SIF in this lates ones there are no this lines:
PCI\VEN_8086&DEV_8C02&CC_0106="iaStor"
PCI\VEN_8086&DEV_8C03&CC_0106="iaStor"
PCI\VEN_8086&DEV_9C02&CC_0106="iaStor"
PCI\VEN_8086&DEV_9C03&CC_0106="iaStor"
Am I correct (of course with your lates drivers iinstead of "iaStor" there should be "iaStorA")
Regards, espace

reply

#41 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 8:03 pm (Last edited: Sun Apr 13, 2014 9:05 pm)

Zitat von espace13 im Beitrag #39
seems that with your self-made TXTSETUP.OEM BartPE should work:
using driver v12.8.11.1000 inclusive self-made TXTSETUP.OEM
here is what is in CD
in:
\I386\INF
there is IAAHCIC.INF
in:
\I386\SYSTEM32\DRIVERS
there is:
IASTORA.SYS
in TXTSETUP.SIF which is in:
\I386
there are this lines associated with Intel storage:
......................
what do you think?

That looks good.
Obviously the Bart PE building tool was able to read the TXTSETUP.OEM I have constructed.

Zitat von espace13 im Beitrag #40
when I have compared your latest drivers and the one I used in my original BartPE with drivers also from you in TXTSETUP.SIF in this lates ones there are no this lines:
PCI\VEN_8086&DEV_8C02&CC_0106="iaStor"
PCI\VEN_8086&DEV_8C03&CC_0106="iaStor"
PCI\VEN_8086&DEV_9C02&CC_0106="iaStor"
PCI\VEN_8086&DEV_9C03&CC_0106="iaStor"
Am I correct (of course with your lates drivers iinstead of "iaStor" there should be "iaStorA")

I will do a deeper look into the files.

EDIT 1:
There was a mistake within the TXTSETUP.OEM file.
Please download the attached file from >here< and try it again.
Good luck!

EDIT 2:
The linked driverpack has been deleted, because it doesn't work for the Bart PEBuilder.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#42 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 8:34 pm

Hello Fernando,
now it seems it is all correct:
in:
\I386\INF
there is IAAHCIC.INF
in:
\I386\SYSTEM32\DRIVERS
there is:
IASTORA.SYS
in TXTSETUP.SIF which is in:
\I386
there are this lines associated with Intel storage:
PCI\VEN_8086&DEV_27C1&CC_0106="iaStorA"
PCI\VEN_8086&DEV_27C5&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2829&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2824&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2922&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2929&CC_0106="iaStorA"
PCI\VEN_8086&DEV_2923&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A22&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3A23&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B29&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B2F&CC_0106="iaStorA"
PCI\VEN_8086&DEV_3B22&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1C02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1C03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1D02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1E02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_1E03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_8C02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_8C03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_9C02&CC_0106="iaStorA"
PCI\VEN_8086&DEV_9C03&CC_0106="iaStorA"
PCI\VEN_8086&DEV_27C3&CC_0104="iaStorA"
PCI\VEN_8086&DEV_27C6&CC_0104="iaStorA"
PCI\VEN_8086&DEV_2826&CC_0104="iaStorA"
PCI\VEN_8086&DEV_2822&CC_0104="iaStorA"
PCI\VEN_8086&DEV_282A&CC_0104="iaStorA"
what do you think?
if you wish I can now upload iso file to dropbox - it is BartPE ONLY with your LATEST drivers so you can verify if it works on your system
if you confirm it does, then I need some more time to create fully blown BartPE with all drivers and additional software
Regards, espace

reply

#43 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 8:55 pm

Zitat von espace13 im Beitrag #42
what do you think?

That looks much better than I have expected. The question is, if the Bart PE CD will be usable with all these Intel AHCI and RAID Controllers.

Zitat
if you wish I can now upload iso file to dropbox - it is BartPE ONLY with your LATEST drivers so you can verify if it works on your system

Yes, that would be fine.
As soon as I have tested it, I will let you know the result.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#44 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 9:03 pm

Hello, I have sent you PM as promissed
Be aware it is ONLY basic BartPE with your lates Intel drivers-nothing else
regards,espace

reply

#45 | RE: ASUS Z87M-PLUS motherboard-XP(32)bit-Intel-RST-problem datum

Sat Apr 12, 2014 10:03 pm (Last edited: Sun Apr 13, 2014 12:53 pm)

@ espace13:
Thanks for the link to the Bart PE iso file.
I have burnt a bootable Bart PE CD, booted off it and got the error message: "The file iaStorA.sys could not be found. Press any key to continue."
This is the standard error message, when the textmode driver has not been correctly integrated into the XP ISO file.
According to my knowledge the real driver (iaStorA.sys) has to be within the root of the i386 directory, where it is missing here. It is not enough to have it within the i386\system32\drivers folder). Additionally the INF file named iaStorAC.inf is missing within the Bart PE image you have uploaded.
EDIT 1:
Since I am interested in finding the reason for the Bart PE CD boot failure, I just have built myself a new pebuilder.iso file using the PEBuilder software, but this time I integrated the "Universal 32bit Intel RST AHCI & RAID driver v11.2.0.1006 mod by Fernando". With this CD I was able to boot into the Bart PE GUI (but could neither use the keyboard nor the mouse - why?).
This lets me think, that either the PEBuilder software was not able to integrate the "32bit Intel RSTe AHCI & RAID drivers v12.8.11.1000 mod by Fernando" correctly or the TXTSETUP.OEM file I had created is unusable.
EDIT 2:
After having spent a lot of time with editing/customizing the files TXTSETUP.OEM and TXTSETUP.SIF and trying to boot off the related Bart PE test CD I am going to give up the project to prepare a modded Intel RST(e) driverpack v12.8 or higher, which can be used as F6 driver to get Windows XP installed or as SCSI textmode driver for the creation of a Bart PE CD.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.