@hancor is there a bios for mobo GA-Z87MX-D3H ?
I am not sure that I can apply the version mentioned by your for GA-Z87X-D3H.
Thanks a lot!

Zitat von Dmitro im Beitrag #31

---

@hancor is there a bios for mobo GA-Z87MX-D3H ?
I am not sure that I can apply the version mentioned by your for GA-Z87X-D3H.
Thanks a lot!

---

@hancor Thank you for so quick response I will try it immediately :) and return back with test result!!!

@hancor thanks for your hard work! Just curious, why are you using F10b bios? The newest one available is F10. It's not available on the official site, but can be found here

I've flashed this bios myself, with updating it's components with UBU tool and can confirm that everything works stable. As you can see, F10 was released in september 2014, while F10 was released in june 2014

Zitat von ayastrebov im Beitrag #34

---

@hancor thanks for your hard work! Just curious, why are you using F10b bios? The newest one available is F10. It's not available on the official site, but can be found here

I've flashed this bios myself, with updating it's components with UBU tool and can confirm that everything works stable. As you can see, F10 was released in september 2014, while F10 was released in june 2014

---

I didn't notice any cjanges even compared with F9. But I beleive that it should bring some improvements.

Does this bios you have attached has nvme support?

@ayastrebov - F10b would be beta (older), and made before any F10 final (newer/latest) - FYI - No inference here on which is better, for any reason, only stating which is older/newer
I prefer beta myself, but only if it's newer than the latest final

Zitat von ayastrebov im Beitrag #36

---

I didn't notice any cjanges even compared with F9. But I beleive that it should bring some improvements.

Does this bios you have attached has nvme support?

---

Hello Guys,
i have successfully updated the BIOS of my mobo with the one kindly offered by hancor, however the mobo still doesnt see my NVME drive.
Is there any further step i am missing?
thank you

UPDATE: I have used the very last release of the BIOS, from the 6th of September (i previously used the one the very first post) and it worked!!
Great stuff, thanks heaps!!

Hello, I'm using this Board with the F11C-BIOS I got directly from Gigabyte after opening an e-support-ticket. I recently bought an WD Black SN750 2TB and today installed ist into the PCIe3.0x8-Slot. I was reading on how to mod the BIOS for UEFI-Support but discovered, in the UEFI BIOS Updater that there is a "EFI AMI NVMe Driver" listed as present.

Does that mean my Board already supports booting form a NVMe-Drive or do I still need to mod the NvmExpressDXE_4 into the BIOS?

The best way to find out if the AMI NVMe driver works is to load the BIOS/UEFI and attempt booting off an NVMe drive.

The worst that could possibly happen, is that it doesn't boot. If it does boot, you're "off to the races"!

Cheers

PS Why not post F11C BIOS/UEFI so others can benefit?

@Tigerfox - Yes, please post the BIOS, and I assume since you see AMI NVME that it's NVME compatible by default now

Well, here it is.

Zitat von Tigerfox im Beitrag #44

---

Well, here it is.

---