hello fellow tieba user
lanceliuqg here

Patched B250M-HDV is also working fine.
Thank you!

Gigabyte Z170X gaming 7 is ok, thx!

Hi, thanks @Mov AX, 0xDEAD for putting this together.

MSI B150 BAZOOKA PLUS confirmed.
In the attachment:
1) i included the bios file with microcode for i3-8100.
2) reverse engineered pinout of this board so you do not have to desolder the bios chip from board. (Mine had MX25L6473E chip, but even with different chip should be the same.)
note: I have used "ELNEC MEMprog2" to flash this.
3) Also change in OS after pcie fix.
4) added while board photo for anyone using the bios file to be sure he has the same board

Going to test ASUS Z170 further more.

Zitat von nickywin im Beitrag #18

---

Gigabyte Z170X gaming 7 is ok, thx!

---

Hi, @bankkopf

Zitat von bankkopf im Beitrag #20

---

Zitat von nickywin im Beitrag #18

---

Gigabyte Z170X gaming 7 is ok, thx!

---

Hi,
how did you flash the BIOS? Gigabyte EEPROM is soldered, so no SPI flashing is easily possible.
Or did you use modified efiflash to get it flashed to the Board?

---

Pretty sure Gigabyte is grounded or I fried the BIOS Chip on my last board. Couldn't get it working in any way with flasher or rasppi GPIO.
Modified efiflash should be able to flash the modded BIOS in theory?

Zitat von bankkopf im Beitrag #22

---

Pretty sure Gigabyte is grounded or I fried the BIOS Chip on my last board. Couldn't get it working in any way with flasher or rasppi GPIO.
Modified efiflash should be able to flash the modded BIOS in theory?

---

use efiflash.exe 0.44 version in Dos.

Zitat von bankkopf im Beitrag #20

---

Zitat von nickywin im Beitrag #18

---

Gigabyte Z170X gaming 7 is ok, thx!

---

Hi,

how did you flash the BIOS? Gigabyte EEPROM is soldered, so no SPI flashing is easily possible.
Or did you use modified efiflash to get it flashed to the Board?

@all
anyone knows if 6-Core are already tested successfully on the z170 Boards?

---

asus strix z270-f have errors like this

Zitat von nickywin im Beitrag #26

---

asus strix z270-f have errors like this

---

Hello, I would like to ask why the Clevo P7XXDM in the BIOS directly add microcode after the machine can boot, but will be stuck in the boot logo on it? You can enter the UEFI setting. But as long as any storage devices plugged in, the boot hard drive lights flashing several times on the card in the logo there.

Zitat von IMaFish im Beitrag #28

---

Hello, I would like to ask why the Clevo P7XXDM in the BIOS directly add microcode after the machine can boot, but will be stuck in the boot logo on it? You can enter the UEFI setting. But as long as any storage devices plugged in, the boot hard drive lights flashing several times on the card in the logo there.

---

Is it possible to achieve 7 or 8 generations of support by replacing modules in the P7xxDM BIOS with a DM2 BIOS module?Or replace the relevant modules in DM2BIOS to restore audio and power off?