Modules:

- OROM IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI GOP Driver HSW-BDW v5.5.1024 -> v5.5.1034
- OROM Intel Boot Agent GE v1.5.47 -> v1.5.62
- EFI Intel PRO/1000 UNDI v6.0.03 -> v6.6.04

Microcode:

Haswell: 24 - cpu306C3_plat32_ver00000024_2018-01-21_PRD_FCD4700E.bin
Broadwell: 1B - cpu40671_plat22_ver0000001B_2017-11-17_PRD_4763E424.bin

Install using USB BIOS Flashback.

version 3503 beta is out :

https://www.asus.com/fr/Motherboards/MAX.../HelpDesk_BIOS/


Is it possible to have the latest one with your Flavor please ? :0)

Regards, Ray.

May need to send PM to him, or we'll see if he's subscribed or @voron00 get's him an email

Rebased on 3503 beta bios:

Modules:

- OROM IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI GOP Driver HSW-BDW v5.5.1024 -> v5.5.1034
- OROM Intel Boot Agent GE v1.5.47 -> v1.5.62
- EFI Intel PRO/1000 UNDI v6.0.03 -> v6.6.04

Microcode:

Haswell: 25 - cpu306C3_plat32_ver00000025_2018-04-02_PRD_5F430452.bin
Broadwell: 1E - cpu40671_plat22_ver0000001E_2018-04-03_PRD_FFFE5286.bin

Install using USB BIOS Flashback.

Thanks @voron00 - @DoZe - there you go!

Updated with latest microcodes:

Modules:

- OROM IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI GOP Driver HSW-BDW v5.5.1024 -> v5.5.1034
- OROM Intel Boot Agent GE v1.5.47 -> v1.5.62
- EFI Intel PRO/1000 UNDI v6.0.03 -> v6.6.04

Microcode:

Haswell: 27 - cpu306C3_plat32_ver00000027_2019-02-26_PRD_4F5914B9.bin
Broadwell: 20 - cpu40671_plat22_ver00000020_2019-03-07_PRD_5246E87E.bin

Install using USB BIOS Flashback.

Zitat von voron00 im Beitrag #1

---

Modules:

- OROM IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI IRST RAID for SATA v13.0.0.2075 -> v14.8.2.2397
- EFI GOP Driver HSW-BDW v5.5.1024 -> v5.5.1034
- OROM Intel Boot Agent GE v1.5.47 -> v1.5.62
- EFI Intel PRO/1000 UNDI v6.0.03 -> v6.6.04

Microcode:

Haswell: 24 - cpu306C3_plat32_ver00000024_2018-01-21_PRD_FCD4700E.bin
Broadwell: 1B - cpu40671_plat22_ver0000001B_2017-11-17_PRD_4763E424.bin

Install using USB BIOS Flashback.

---

@ares6 - you must use USB Flashback to install mod BIOS.

Zitat von Lost_N_BIOS im Beitrag #8

---

@ares6 - you must use USB Flashback to install mod BIOS.

---

Zitat von voron00 im Beitrag #6

---

Updated with latest microcodes:

[...]

Install using USB BIOS Flashback.

---

I have been struggling with this exact situation!

I installed a gigabyte tpm 2.0 on the tpm socket, the module is succesfully detected by bios i can set tpm device to enabled and tpm state also. For soms reason Windows dont detect the tpm. Also tried updating firmware. Tried the powershell tpm commands.i spent much time on this particular issue, happy to finally see a massage of this because i couldnt figure out where this problem is coming from. I gave up and was thinking that the gigabyte module was not compatible, i never have been into the bios modding community but this site have so much clear tuts i will try to mod this bios, ps anyone have problem with this mobo suddenly losing Intel ME firmware?

Have you applied the above modded BIOS from Voron00 ? Sorry I can't help for the Intel ME environment. Back to my TPM2.0 question: seems like this is not possible. At all. However I remember having read another forum's thread in which Asrock was providing a custom BIOS including TPMv2.0 for a Z97-based motherboard. So sorry this will never happen with Asus.

Anyway, thanks all for your awesome job supporting this abandoned BIOS !

@voron00 can u make a modded version for my Maximus Vii Hero ? :)

I want to install Macintosh Catalina or BigSur but i read on the internet that there might be a problem with the NVRAM after update 2XXX? i tried to flash the old NVRAM capsule in your modded bios, but to be fair i don't know what i am doing.. if there wasn't a bios flashback button this would be the 7th mobo i destroyed by flashing without knowledge. could someone check the latest attached 3503 if the broken NVRAM due to a missing bit ( what i have heard ) is fixed.

Thanks in advance

@Lost_N_BIOS Perhaps you could help me, as you've helped me before back on the InsideH2O bios on the Aspire 5741.

I now own this crappy mobo as well and just run the latest official bios release.
I figured out that some of these updates (I suspect microcode) break stuff such as overclocking (see here).

My question is not related to that, but I would like to know if it's possible to add 1920x1080 resolution support (for the dGPU, I heard that iGPU should support 1080p out, but I didn't test) in the bios/UEFI. My GA-Z97X SLI had that, which makes the boot logo look a lot better, the UEFI bios look more crisp and clean and rEFInd bootloader can then also look good.