Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � General: Storage Drivers (AHCI/RAID, NVMe and USB) � Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 4:19 am (Last edited: Thu Feb 08, 2018 5:19 pm)

Hi,

I made the mistake in installing most recent RST on an older Intel S3200SHV Server board with Intel� 82801IR I/O Controller, evidently all hell broke loose as i got spinning dots at reboot. In order to address the issue I set the controller to IDE after unplugging one of the drives. I did some research and apparently version 10.8.0.1003 is the latest one that would work with this legacy controller, can anyone please confirm this and if so, how can i go back to my RAID setup if the server no longer boots when set to RAID (Latest RST has already been uninstalled).

Your suggestions are greatly appreciated

reply

#2 | RE: Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 5:40 pm

@SarvenAtam:
Welcome to the Win-RAID Forum!

It will not be easy to get your Intel RAID system bootable again without doing a fresh OS installation. What you can try to do is to boot off an USB Flash Drive containing the original Windows Server 2016 image and to choose the "Repair" option. Maybe you will be able this way to load a matching Intel RAID driver and to repair the boot sector.
The latest Intel RST RAID driver, which natively supports the old Intel SATA RAID Controller with the DeviceID DEV_2682, is the v10.1.0.1008 WHQL.

Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#3 | RE: Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 6:24 pm

Is there a way i can install v10.1.0.1008 WHQL while in IDE mode? Since i cannot boot into the O/S in RAID anymore. Also this is a Domain Controller so re-installing everything is not an option :(

reply

#4 | RE: Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 6:32 pm

Zitat von SarvenAtam im Beitrag #3
Is there a way i can install v10.1.0.1008 WHQL while in IDE mode?

No, you will not get it installed, because none of Intel's MSM or RST drivers do support the IDE mode.
The main question is: Where is the OS installed (within or outside the RAID array)?

reply

#5 | RE: Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 6:38 pm

The Win 2016 Server Essentials O/S was installed on a RAID1 managed by the Intel® 82801IR I/O Controller, i installed RST (Latest), rebooted and got spinning dots :( i guess the latest RST updated Win 2016 native drivers at the same time...

I then had not choice but to unplug one of the drives part of RAID1 and boot with IDE, i'm wondering if there's a way to copy or restore RAID drivers, boot back up in RAID and rebuilt RAID1

reply

#6 | RE: Intel® 82801IR I/O Controller Supported RST Version with Windows Server 2016 datum

Thu Feb 08, 2018 6:58 pm

Zitat von SarvenAtam im Beitrag #5
i'm wondering if there's a way to copy or restore RAID drivers, boot back up in RAID and rebuilt RAID1

You should consider, that both HDDs/SSDs are still members of the RAID array. So if you want to boot off any of these 2 disk drives, you have to break the RAID array as first step.
Another option would be to use a 3rd HDD/SSD, to install any Windows OS onto it in RAID mode and to use the existing, but not bootable RAID array as data storage location. This procedure may work. Windows 10 has a generic in-box Intel MSM RAID driver v8.6.2.1025, which natively will support your on-board Intel SATA RAID Controller and the already existing RAID1 array.

reply

Intel SoC: Bay Trail and al � � Intel 900P over PCIE

Please enter a reason for warning.