Any chance developing a Coffe Time that works on Clevo P870DM-G stock bios?

Zitat von svarmod im Beitrag #1416

---

CoffeeTime 0.99

- Added 16-threaded CPUs support for any s1151 22nm boards (method provided by @dsanke).
- Added fix to remove "ME abnormal" warning on MSI boards with disabled ME. (also by @dsanke)
- Added fix for Clevo Z370 with disabled ME to bypass auto shutdown. (also by @dsanke)
- Added possibility to setting up boot RAM freq to 2133 (may be usefull to starts high-freq RAM with 1440 CPUs).

Enjoy!

---

@mooms

I´ve a z170i Pro Gaming and a QQLS working great with a moded 2003 BIOS.

I´m going to try to install a new 3805 moded BIOS and I´d like to ask you which ME Version and VBIOS version I should set.

Also, did you applied all patches and fixex? (I guess PCIe 1440 is not needed)

Thank you in advance!

Zitat von almondigo im Beitrag #1428

---

@mooms

I´ve a z170i Pro Gaming and a QQLS working great with a moded 2003 BIOS.

I´m going to try to install a new 3805 moded BIOS and I´d like to ask you which ME Version and VBIOS version I should set.

Also, did you applied all patches and fixex? (I guess PCIe 1440 is not needed)

Thank you in advance!

---

@mooms

Thank you very much, I got it ready, I´ll try it tomorrow.

I hope it helps to improve RAM speed (2800Mhz stable atm) and with adaptive VCore that´s not working fine with 2003.

On coffeetime0.92, there's an option for nvme fix. What does it do actually?

Zitat von mooms im Beitrag #1424

---

You don't need any pin mod wiith these CPU, only BIOS mod.

---

Anyone here was able to successfully make a modded bios for the Z270-A pro motherboard?

hey everyone,
has anyone tried qqls on a M10A ?
to use a z370 board with an ES cpu do i need the pin mods? (SKTOCC or GND isolation)

Zitat von crashpb im Beitrag #1434

---

hey everyone,
has anyone tried qqls on a M10A ?
to use a z370 board with an ES cpu do i need the pin mods? (SKTOCC or GND isolation)

---

I have an ASUS Maximus IX Formula (z270). Trying to modify the 1301 bios to work with the 9900k CPU.

Already performed the hardware mods to the bod.

Has anyone succeeded here? What settings/micro codes do you recommend to set in Coffee Time?

Any advice is appreciated.

Zitat von DirtyRat im Beitrag #1436

---

I have an ASUS Maximus IX Formula (z270). Trying to modify the 1301 bios to work with the 9900k CPU.

Already performed the hardware mods to the bod.

Has anyone succeeded here? What settings/micro codes do you recommend to set in Coffee Time?

Any advice is appreciated.

---

-

Zitat von Dnatwork im Beitrag #75

---

Help?

I have an ASRock H110M-STX (motherboard in the Deskmini).

---

Zitat

---

I have this exact same problem, but i have two deskminis.

---

Mine motherboard is rev.1.02 used with i3-6100 (SkyLake) and I would like ask you which version of the motherboard your deskminis have, you wrote one of them has the freeze issue but the other one has not.
I know someone having rev.1.03 and no issues using G4600 and i5-7100 (both KabyLake) and read a lot of forum posts from users having this issue using different cpu-s (both SkyLake and KabyLake).
forum.asrock.com/forum_posts.asp?TID=17021&title=solution-for-intel-graphics-freezing-system

I already talked both to ASRock and Intel support but no solution found. I suppose this issue could be related to hyperthreading or hw vrm related and maybe ASRock changed something for the rev.1.03 to handle this. Other option could be memory settings (timing) or soc voltage.

@Afaiku - Thanks for your guidance . I found the other thread and confirmed that the microcode for the 9900k is 906E3 but includes the other two from the example as well. Does anything look off in my settings?