@6I9
Yes, I use this modbios with 8600K for now. All mods are included, supports all Sky, Kaby, Coffee, Coffee-Refresh.
Don't forget about mass pin isolation and watch out for VRM condition.

Hey mate
Mind uploading your modded bios
I've got the same board
And planning on getting a 8600k

@svarmod
Great!big thanks man
Same 4 pin isolation as on ather brands? or there are any differences on GA

@svarmod : The pins on Sabertooth, Ranger and Hero are definetly fine without using any isolation. Ranger and Hero never ran for more than half a second, though (even with isolation), so your mileage may vary. Sabertooth definetly runs for several hours (including about 15 min full load) with a 9900K and only sktocc-mod applied and the socket looks just as good as before. I guess I will skip GBT for now, though. Burns in VCC area might be risky for CPU as well. :-(

@GI9: Check the photo integrated to CoffeeTime. Isolation on Gigabyte is much more extensive and includes a wide wedge on the opposing side.

@PCGH_Torsten
Ranger and Hero: no start => no payload => alive pins.
Sabertooth series really may be different of all. I received feedback about Z270 Sabertooth whose iGPU not works with common mod (it can be user mistake, but still).
You can expecting anything from ASUS...

@svarmod
start for half a second = vcore supplied != instant shutdown because of short circuit. I will report about long time capabilities when that damn SPI finally arrives. :-)

Talking of: On Asrock Z270 Gaming K6 I do not manage to get past IME shutdown problem, even when with HDA mod. I tried both integrated flasher and afudos.

Zitat von kike9983 im Beitrag #361

---

probed and tested in H110 BTC pro for 13 gpu, great for mining, happy processor 8th generation in older motherboard. Thanks @elisw and other users, atached mi bios mod, functional with Celeron Procesor G4920 and Asrock H110 BTC pro and AMD XFX RX 580 8gb GPU.

---

Hi! Anyone modded ASROCK B250 Gaming K4 with i7-8700, i've try with CoffeeTime but failed!!

@vuquanict
Whats went wrong? Did you flash full modbios image? What about socket pins?

Zitat von svarmod im Beitrag #736

---

@6I9
Yes, I use this modbios with 8600K for now. All mods are included, supports all Sky, Kaby, Coffee, Coffee-Refresh.
Don't forget about mass pin isolation and watch out for VRM condition.

---

@Datlore001
Gigabyte Q-flash has some updating restrictions, better use FPT or AFU. There are no any locks on Gigabyte so no problems with these tools.

@svarmod
I've flashed with FPTW64 -bios -f bios.bin
This is pin mod.
When insert CPU and power on, system turn off after one second.

Hello, I have Asus z170s sabertooth.
I have a plan 9900k on z170 with h/t.
2202 bios + coffeetime and I got New mod bios.
But "init 16cpus" did not patched.
Is it ok? It will works?
Sorry about poor english. Thanks.

@vuquanict
You flashed only bios region, you also need rewrite ME and FD to i7 starts. Look for info about unlocks in previous posts.

@Er236
Yes, it should work in general, but I recommend to remake mod with latest CoffeeTime version.

Zitat von svarmod im Beitrag #749

---

@vuquanict
You flashed only bios region, you also need rewrite ME and FD to i7 starts. Look for info about unlocks in previous posts.

---