@RussianEnthusiast

4

Zitat von chinobino im Beitrag #301

---

@RussianEnthusiast

4

---

Just 4. Not sure if it's been updated since I downloaded it, but was version 72. Couldn't find microcode for 6 core, so I ended up extracting version 84 of 4 and 6 core from a recent Gigabyte Z370 BIOS using MMTool and using that instead.

Hi guys, I am working on adding Coffee Lake 4-core support to an Asus H170 board. I have followed the instructions in the first post except that I do not have the subfolders "UBU / modules / mCode" within my UBU directory to place the Sel1151 batch file and the microcode file. I downloaded and extracted the latest UBU program from the link in the first post. Any advice?

Also, are there any extra steps for support for the i3 8350k? I know these steps will work with the i3 8100 but I am looking to run an 8350k.

Thanks!

@Datlore001 - use v1_69_17_4, it's in the "MEGA" link. It's Fernando's Mega folder, second link to download on that UBU page (not developer), there you will fine modules / mCode
https://mega.nz/#F!hZ8V0TKD!0OVo1pLEs2VmIYbRR0o7JQ

I'll try that version this evening. Thank you!

i have msi z270i gaming pro ac
please help me create bios to run i3 8100
thank you so much

Zitat von Lost_N_BIOS im Beitrag #305

---

@Datlore001 - use v1_69_17_4, it's in the "MEGA" link. It's Fernando's Mega folder, second link to download on that UBU page (not developer), there you will fine modules / mCode
https://mega.nz/#F!hZ8V0TKD!0OVo1pLEs2VmIYbRR0o7JQ

---

Make a BIOS backup now with your flash programmer, and verify it's matches 100%, then make a copy of that and store both somewhere safe. So you don't ever loose your LAN MAC, UUID, Serial, DTS key if there etc.

Did you already try everything mentioned here in the Asus section
[Guide] How to flash a modded AMI UEFI BIOS

AFU Guide here for modded BIOS - [Guide] Flashing modified AMI Aptio UEFI using AFU
Intel Flash Programming Tool (FPT) will flash it too, it's here in "System Tools" get package that matches type of chipset and Intel ME driver you would install - Intel Management Engine: Drivers, Firmware & System Tools

Like you mentioned though, you have programmer, so you could be done with this by now using that. As long as you're sure your BIOS mod is OK, opens in many other programs without error, then it should be OK to program.
May fail still due to the mod not working, but you can always program back to original while you try to work it out again.

As for /GAN, that may not work with all BIOS, especially newer ones, and there is a few ES versions out there that /GAN works with, maybe you need to try different version?
These are the ones I have 2.29, 2.36, 3.06.01

Zitat von Lost_N_BIOS im Beitrag #309

---

Make a BIOS backup now with your flash programmer, and verify it's matches 100%, then make a copy of that and store both somewhere safe. So you don't ever loose your LAN MAC, UUID, Serial, DTS key if there etc.

Did you already try everything mentioned here in the Asus section
[Guide] How to flash a modded AMI UEFI BIOS

AFU Guide here for modded BIOS - [Guide] Flashing modified AMI Aptio UEFI using AFU
Intel Flash Programming Tool (FPT) will flash it too, it's here in "System Tools" get package that matches type of chipset and Intel ME driver you would install - Intel Management Engine: Drivers, Firmware & System Tools

Like you mentioned though, you have programmer, so you could be done with this by now using that. As long as you're sure your BIOS mod is OK, opens in many other programs without error, then it should be OK to program.
May fail still due to the mod not working, but you can always program back to original while you try to work it out again.

As for /GAN, that may not work with all BIOS, especially newer ones, and there is a few ES versions out there that /GAN works with, maybe you need to try different version?
These are the ones I have 2.29, 2.36, 3.06.01

---

That would be better way to do your mod, then all your board details are already there by default. Make sure when you create your backup it verifies properly.
Sometimes with flash programmer you may have to try several versions of software version or different software app before you find one that works properly (ie saves backup that verifies correctly, flashes and then verifies correctly)
And of course make sure your modified file opens and looks proper in as many other programs as you can to check it's OK before programming.

At least you already have programmer so you can fix it if fails!

Tap tricks on TAOBAO (kapton) for i5 & i7 :

https://item.taobao.com/item.htm?spm=a31...id=566900623882

Mhhh..... i hope there's none of your work here....

https://bit.ly/2MELdsd

Using @mtothaj donor BIOS I was able to finally start the M8I board with 8700K. But I have no success with the system to POST. The process ends with Q-Code 18 (Pre-memory System Agent initialization is started) or sometimes with Q-Code 82. DRAM Q-LED is flashing right before it ends with Q-Code 18. The system is POSTing with old Skylake CPU. I even tried setting some values/voltages in BIOS manually before putting the 8700K in, it didn't help. Unfortunately, I can't test the 8700K on another system now - maybe the CPU is faulty.

Zitat von s.napi im Beitrag #313

---

Using @mtothaj donor BIOS I was able to finally start the M8I board with 8700K. But I have no success with the system to POST. The process ends with Q-Code 18 (Pre-memory System Agent initialization is started) or sometimes with Q-Code 82. DRAM Q-LED is flashing right before it ends with Q-Code 18. The system is POSTing with old Skylake CPU. I even tried setting some values/voltages in BIOS manually before putting the 8700K in, it didn't help. Unfortunately, I can't test the 8700K on another system now - maybe the CPU is faulty.

---

Where to find newer microcodes for quad and hexa?I want to get last update before spectre/meltdown fixes.
Also, if someone explain how to extract microcodes from a bios file that would be a lot better. I know that should me via MMtool or Uefi Tool but i don't know what is the name of the microcode's body...