Zitat von Lost_N_BIOS im Beitrag #15

---

@imseanross - Sorry, no, I don't have any favorite brand or anything, just make sure it's conductive ink/paint, or use silver/copper tape etc, or solder (I use solder for such things)
Liquid graphite will work too, user showed me he did this week, maybe he can advise you a brand/link to purchase @MrCjxer can you advise/link on the liquid graphite you used - thanks

---

as a side note... I only used the board with B0 CPU (i3 8100) so I didn't have to do anything with the pins.

Will it work with an i3 9100f and Pcie?

@Seomekss - ONLY if you have B0 - SSPEC SRF7W - i3-9100F (906EB) << This CPU type does not require pad mods, only requires the older version ME FW and you're good to go
U0 - SSPEC SRF6N - i3-9100F (906EA) = not supported by "Mod2" on first post << ** This CPU type require pad mods to CPU **

If you have SRF6N 9100F, then you will have to ask elisw if they will do new mod for U0/906EA CPU's
Never mind, sorry, see post #4 for BIOS compatible with either 9100F CPU!!

It has stock bios 7.10 and ME FW version 11.0.0.1171

that should be fine ¿right?

@Seomekss - Yes, but if your current ME FW is above 11.7.0.1229, you will have to downgrade in other ways, Asrock flasher will not downgrade it usually.

alright thanks
----------------

if i update, ¿can i still use my 6th gen cpu?

@Seomekss - If you use BIOS in post #4, the following CPU types are compatible, if this does not help you, then you need to tell me your old CPU model
Coffelake CPUID 0906EB -72
Coffelake CPUID 0906EA -70
Skylake CPUID 0506E3 -76
Kaby Lake CPUID 0906E9 -42

its a celeron g3900 sr2hv
CPUID 506E3.
So can I use any of the 9100f?
no pad modding

Guys, I'm about to buy the processor. Can i use any i3 9100?