Zitat von Ubro92 im Beitrag #39

---

EDIT: With the last Labview update of 04/01/2018 all the modules are updated like my bios so the difference is reduced to the theme only and to the M.2 module :)

Hi, the integrated M.2 module guarantees compatibility in case of SSD M.2 installed via pci-e or Sata adapters to be detected at boot in case of OS installation on these.

For SSD msata, theoretically should work if connected by pcie with adapter unfortunately I have no way to do tests so I can not tell you more :(

---

Works good and looks good :D

Microcode updated, unfortunately I did not have the chance to test the last bios because I no longer have motherboards, if someone tries them, report any problems or bugs. Thank you :)

CHANGELOG

- Update Intel CPU Microcode 0306A9 YB: 20
- Update Intel CPU Microcode 0206A7 SB: 2E

DOWNLOAD beta not stable, flash only with programmer (Example CH341A) or use the bios on the first page

Z77 EXTREME 4
Z77 EXTREME 6



SCREEN




ATTENTION: I'm not responsible for bricked motherboard, dead bios chip or thermonuclear war.

@Ubro92: Once more - thank you for your work! I've been using your BIOS, the one you've released on March and I really like it. It's even more valuable as the BIOS available at Labview is now based on 3.00 so it has all the updates but it no longer supports NVME boot.

I've tested your latest release and unfortunately the update failed at the "Processing Crashless feature" stop. The update froze and after reboot the motherboard was "dead". Fortunately I own the CH341 programmer and I've used it to flash the BIOS chip with the latest update. Now everything is working just fine :)

I hope you will keep on updating your modded BIOS :)

Thanks for reporting Crocodile, have you tried that for Extreme 6?

I've only tried the one for Extreme 4, as that's the motherboard I own...

Any info on these new microcodes? The previous ones with the meltdown/spectre fixes made my computer unstable

Hello, unfortunately tests must be made every cpu has a different behavior.
To stabilize the system you can try to deactivate the energy savings C3 / C6 / C7 and use LLC on average values (4-3).

Also set in "Power Options" the "high performance" option and in "Change plan settings" set the minimum level of the CPU to 5%

New here and first post! First thanks so much for the custom BIOS for my Z77 Extreme6.

I do have a bug to report. It looks like my floppy drive is no longer recognized no matter what I do. It’s enabled in bios and I’ve tried multiple drives and boot orders to no avail. Can you please advise?

Note: regarding boot order, I used to be able to get it to show up in Win10 home latest edition by following the boot orders describe here: https://forums.tweaktown.com/asrock/4888...disk-drive.html

That was with bios 2.80E from AsRock’s site.

Bump!^

Help!

@Ubro92 ^^^

@Karlos11M I'm afraid it will be difficult for anyone to help you as hardly anyone still uses floppies. How do you even connect it to the motherboard?

Have you tried downgrading to original bios? It's possible that one of the upgraded Intel drivers removes floppy support.

@Crocodil
New bios with Nvme support to test
https://www.mdclab.it/intel-socket-1155-z77-extreme-4.html

Z77 Extreme 6 has an onboard floppy controller. It was fine until I got the custom BIOS.