@Screemer The changes made to the fan profiles are superficial there has been no changes made outside of retuning the default custom values and unlocking the [Fan Ctrl FULL] option. Without being able to reproduce your issue I can't say what the problem is but it is one where changing the default retuned values should fix. I also got @barisuraz to try and reproduce your problem and he couldn't either.

Maybe the fan Ctrl full option is the problem. What are the default options? Because you already mentioned the max. Temp value was 75 and you raised it to 85. Lowering those doesn't help. By default the non modded bios has all fan options turned off. Your modded bios has pwm 4pin turned on for every fan header. Though there are some changes appart from the standard bios.

I'll use the original bios from now on because the fan issue is way more annoying then 400mhz lower all core.

But thanks for all your efforts and you hard work you put in the mod bios.

@Screemer [Fan Ctrl FULL] is just a value to determine at what CPU temperature preset and custom fan values are ignored. Your problem is very much a niche one which best as I can tell is specific only to your system so its something you'd need to troubleshoot your end. The fan headers being enabled and set to 4-pin is to stop all of the fans running 100% by default, nothing more it is the exact same change as if you were to enable 4-pin yourself.

Thanks for your reply. How should i troubleshoot a issue I only got with a software you provide without getting any information about the default values of the original bios? Kind of funny. Like I didn't mentioned multiple times: there is no fan issue with X37AG807.BST.

I really appreciate the work you put into the bios and all the correspondence with Biostar who seem to ignore you. The situation and handling of the issue I got looks very similar to me. I asked for a possible solution and the "only" reply I got is "can't reproduce. Can't fix. Troubleshoot yourself". Pretty much the same behavior.

@Screemer I'd start with taking the fans out of the daisy chain and seeing how they behave. Do you use any fan controllers? I'd check / remove those as well. Without being able to reproduce your problem I have no idea what to change if you can isolate the cause of the problem your end then I can most likely do something to remedy it.

Time for some fun guys. @ket @Lost_N_BIOS Another bios with 1.0.0.6 PinnaclePi was released for some MSI boards. Link: https://www.msi.com/Motherboard/support/...MING-PRO-CARBON. I guess we could try to port it now that we have more than one source for the AGESA.

Sorry, I forgot to dig back into that on page 3 when you gave me a link previously! I will leave this page open so I remember check it out tonight when I have more time

No download there, only Live update link/info. You'll have to find us a copy of this BIOS @barisuraz

@barisuraz Biostar can't be bothered to update their firmware. The excuse being used is "we only just updated to 1004c" so don't hold any hope that you'll get a AGESA 1006 firmware from Biostar. I'm still pushing them to sort out memory compatibility so perhaps there will be some movement in that area soon. For now at least, I'm using the X470 Fatal1ty K4 and the board is currently running 3466MHz without even so much as a hiccup and will go as high as 3600MHz but I still need to work on tightening the timings at 3600. Heres a quick screen of results at 3466 on the K4, way better than the GT7 can even dream of achieving at the moment.

@Lost_N_BIOS found it http://download.msi.com/bos_exe/mb/7A32v1J.zip

Thanks, I didn't think to edit the previous BIOS URL with new BIOS name, I must be tired

I found 9x modules where Agesa is mentioned, along with the version details, so I think at least that many will need swapped or at least edited in some way/part.

Hello, curious if updating to this bios might fix my board power cycling 3 times before posting. Also the PowerNow option is not working on the official release, the voltage doesnt go down when idling. Pretty much sold on the latest bios, so I'm keen to try out options.

@banjanjan It sadly didn't for me. Still cycles 3 times before posting.

@barisuraz well that sucks. DRAM problem? also have an issue with voltage reading in the bios vs software. my core voltage in bios is 1.270 while in software (hwmonitor/hwinfo) is 1.250. there is also some kind of offset with DDR voltage and SoC(sadly i dont remember the exact figures). does your mobo have consistent readings as with software?

@barisuraz @banjanjan - sounds like DRAM Training issue, can you guys disable dram training and test if same?

OR Fail Count set to 3, can be set to 1 - I checked, and default is 3 - it's in CBS, maybe @ket left suppressed though, I can't tell for sure but it looked like he enabled visibility.
<Request> Flagship X470 Gaming 7 Wifi Motherboard BIOS Fix

Yeah I believe it is related to the DRAM as it only happens when the ram is OC'd over 2400mhz. I will try those but I don't really know how to disable DRAM training.