@Blakil

If the windows installation media doesn't work probably something wrong with.
The quicker option is to download the windows 10 media creation tool and redo the ESD-USB.

@noInk

Found the culprit for my issue, it was OFA NVMe driver v1.5. With stock MS driver it works fine. I'm trying some people here in the forum to see if there is a solution.

Yes, two USB drives - first with DUET/REFIND, second with Windows 10 installer. And last bios, 1408 version.

On other computer (with UEFI) this USB with installer works normal.

P.S. Try to install Windows 10 on NVMe drive on other computer, with UEFI - and did it. Right, until the first restart. As it turned out, the local UEFI also does not support NVME drives. However, he did the initial installation, and I rearranged NVMe to the target computer with P6T. DUET on it saw the disk. However, booting from it, the result is the same as when trying to run the installer Win10 from a USB flash drive - it just stay on the Windows logo.

P.P.S. That's work! Simply need in bios:
Advance -->Chipset -->Intel VT-d --> from enabled in DISABLED
And it works!

But... is it possible to do autoload?

@kado
@noInk
(Sorry, I didn’t immediately understand how the naming system works.)

@kado
If it doesn't happen with the vendor specific or the default OS driver maybe the OFA NVMe driver doesn't fully work with sleep\hibernation.

@Blakil
There lots of configuration, if VT-d is required download the windows 10 media creation tool and redo the USB and if it doesn't work check for bent CPU pin on the socket.

@noInk

No, I don't need that. I downloaded ISO directly from the Microsoft website, and it installed absolutely normally anywhere. Apparently, the problem is that VT-d makes some settings for the devices, which does not allow working with them from DUET.

@Blakil

Chance are something wrong with the WIN10 USB or you CPU socket.
If the 2019 version is giving you issue, use the 2015 DUET version.

Hi guys , i have serious problem here:D recently i get new x58 by gigabyte (ga-usb3) and wants to install nvme 1tb by lexar so i try duet and going to getting the job done as before i did on P6T by asus and same cpu (x5650) but now i freeze at first when i put usb duet flash for more specific i should say motherboard knows usb storage even try to boot but before going the bootloader it goes freez and said : "entering dxe - duet udk2017" in red text color and some music symbol and nothing

@CelsiuS

Try the use the either the 2019 or 2015 DUET version. The 2015 might be more compatible with your board.

no differences i try them all

@CelsiuS

Did you remake the USB at each try? Does it work on other system?
if disabling the USB 3.0 doesn't help, try Clover.
If it work there might be hope but not all system are compatible with DUET and I'm unable to implement unknown fixes.

im trying aging on duet 2015
i have issue on clover too , steps dosent go well as in tutorial

problem solved !!! tnx !!! i cant believe usb3 was problem ( i switch to disable)

Zitat von CelsiuS im Beitrag #599

---

problem solved !!! tnx !!! i cant believe usb3 was problem ( i switch to disable)

---