Proprietary board, proprietary bios, dual CPU and missing instruction set.
Those overlap like the Error \ Start!
The current error mean your CPU is not supported, next if fixed could be the logical number of socket and right after something with the BIOS itself.
Unless it's working already.. this version of DUET is not tailored for your system.
You got better chance with Clover.

@SkOrPn @ulises31 @lolcocks

Most of AMD CPU are not currently supported and won't be supported on this build.
The required machine specific registers or anything related to AMD has been partially stripped (to acquire some additional firmware space) and\or never fully implemented.

Oh really? I thought it was fairly platform agnostic and only needed x86_64 or something along those lines. I knew this was geared towards Intel X58 but I thought DUET was platform agnostic because it is just a simple UEFI bios.

Sort of.
The CPU library used to build up the UEFI protocol include among other (INTEL CPU) the specific instruction for the 5600 series while pretty much nothing for AMD, so..
the actual firmware packaged inside the DUET build on the first page is made to run on generic (INTEL) x86_64 PCH.

Gotcha, I understand now. I remember back when I was reading about DUET many years ago that it was actually Intel that originally laid the groundwork for DUET. I might be wrong about that but I swear that is what I read.

Clover does not show the drive if it is pcie ahci ssd. Do we have some drivers for this?

Hello,

I wanted to share my test. I can safely install nvme disks on my gigabyte GA-EX58-UD4P motherboard (Rev 1.0) and usb 2.0 key. Sometimes with a 3.1 usb key, it was more complicated. I used the DUET_UDK2017_REFIND or the Clover Legacy. Generally, simpler with the duet no problem but if I used both software with a 3.1 usb key, it rarely worked.

Now I have another problem.

I want to use a SSD sata 6 m.2 ngff instead of a usb key. I bought this NVME adapter card NGFF turn PCIE3.0
https://fr.aliexpress.com/item/327566323....2d836c37qiLicT

On this card, I can install a nvme disk (1TO) and a NGFF disk (120go).

With the software DUET_UDK2017_REFIND recognizes only the usb keys and with the Clover software does not work either.

Can someone help me please?
So, the idea is to install windows 10 on the nvme disk and to use the 120go NGFF disk as a usb key in order to install windows 10 on a nvme of my X58 motherboard.

NB: My maximum speeds are 1750mo / s and 1700mo / s.

One last question, why are all nvme disks x4? because they were X8 our motherboard could reach much higher speeds, rig

Can't you just use a normal USB key?

Unless your board already natively boot from the peripheral, without any coding and/or serious legacy bios modification, you won't be able to load UEFI .
You can always implement a network bootloader, or something, but, I won't be able to help you.

For the M2 SATA as install disk, your best bet is to find a compatible M2 SATA DXE and place the EFI file inside %EFI_BOOT_DISK%\EFI\Boot\drivers folder to get the M2 SATA recognized at boot up. Additional F4 driver may be required during the installation phase.

Zitat von ulises31 im Beitrag #457

---

One last question, why are all nvme disks x4? because they were X8 our motherboard could reach much higher speeds, rig

---

Hi everybody.

I have already tested the DUET/REFIND method successfully, but I would prefer the manager to be installed on a fixed SSD SATA drive rather than on a USB stick - I hope this is possible?

Has anybody tried using other boot managers, GRUB for instance?

I cloned the USB to an internal drive with clonezilla and set the drive as primary boot device.
Seems to work perfectly, so far. I installed Windows from DVD media on my NVMe drive and it starts flawelessly.

Anyway... where can I find descriprion of the DUET / REFIND configuration? I would like to cut all the delays to zero, as the only system to be booted this way will be Windows.

I set
timeout 0
in refind.conf, but I can't get rid of the initial text screen with memory scan results and list of... something... boot configurations? How to skip this screen?

@glorifyday

DUET on screen output cannot be suppressed via post build command.
REFIND configurable option can be found @ https://rodsbooks.com/refind/configfile.html

Thanks, @noInk.

Is it possible to use a different boot manager instead of DUET/REFIND?
GRUB? Windows boot manager?

@glorifyday

You can replace the %EFI_BOOT_DISK%\EFI\Boot\Bootx64.efi with any EFI boot manager, just keep the name "Bootx64.efi" convention.

Zitat von ulises31 im Beitrag #457

---

Hello,

I wanted to share my test. I can safely install nvme disks on my gigabyte GA-EX58-UD4P motherboard (Rev 1.0) and usb 2.0 key. Sometimes with a 3.1 usb key, it was more complicated. I used the DUET_UDK2017_REFIND or the Clover Legacy. Generally, simpler with the duet no problem but if I used both software with a 3.1 usb key, it rarely worked.

Now I have another problem.

I want to use a SSD sata 6 m.2 ngff instead of a usb key. I bought this NVME adapter card NGFF turn PCIE3.0
https://fr.aliexpress.com/item/327566323....2d836c37qiLicT

On this card, I can install a nvme disk (1TO) and a NGFF disk (120go).

With the software DUET_UDK2017_REFIND recognizes only the usb keys and with the Clover software does not work either.

Can someone help me please?
So, the idea is to install windows 10 on the nvme disk and to use the 120go NGFF disk as a usb key in order to install windows 10 on a nvme of my X58 motherboard.

NB: My maximum speeds are 1750mo / s and 1700mo / s.

One last question, why are all nvme disks x4? because they were X8 our motherboard could reach much higher speeds, rig

---