Zitat von Lost_N_BIOS im Beitrag #270

---

@minigonzo - dump BIOS with EZP2010 and upload for me, I will update it for you, then you program back with EZP2010

---

@minigonzo - you're welcome

http://www.filedropper.com/minigonzo-ucode-6fa-upd

Same shit: BIOS does not support the current stepping for processorFB.

i read that theres 2 versions of t7700
mine is
SLAF7 G0 06FB

@minigonzo - Sorry for not asking, or inserting both, I just assumed 6FA
6FB Added instead of 6FA - http://www.filedropper.com/minigonzo-6fb-upd

Thank you. Can i ask something else? We repair motherboard asus TP300LA. Have problem with PCH and we changed the cpu. Originaly Cpu is I7-5500U, we changed with i7-5600U with Vpro. When trying to start with clear me region, can`t start correctly. 100mA and do nothing. Is this possible that bios microcode or unsupported Vpro is the problem?

@minigonzo - You're welcome! Does that BIOS/CPU combo work now for T7700?

Clear ME region never makes sense to me, even when someone tries to explain what they think this means. What does "Clear ME" mean to you?
Do you have a programmer dump from this BIOS before you did anything to it? If yes, send to me, I will update and fix the ME FW and add microcode to the BIOS.
This CPU supports vPRO, so either there is a ME FW issue, or CPU microcode needed in BIOS. Since you changed PCH, does that 5500U work, I mean, did you test with this CPU after PCH change to make sure that was done OK and is not part of the issue?

Note to self 306D4

Zitat von Lost_N_BIOS im Beitrag #276

---

@minigonzo - You're welcome! Does that BIOS/CPU combo work now for T7700?

Clear ME region never makes sense to me, even when someone tries to explain what they think this means. What does "Clear ME" mean to you?
Do you have a programmer dump from this BIOS before you did anything to it? If yes, send to me, I will update and fix the ME FW and add microcode to the BIOS.
This CPU supports vPRO, so either there is a ME FW issue, or CPU microcode needed in BIOS. Since you changed PCH, does that 5500U work, I mean, did you test with this CPU after PCH change to make sure that was done OK and is not part of the issue?

Note to self 306D4

---

Can help?

@minigonzo - I am confused, you asked to mod for T7700 - and then never confirmed, does the BIOS at 274 with 6FB work with T7700?

For other system BIOS - here is mod with fixed updated ME FW (since I'm still not sure what you mean about "Clear ME") + Microcode 306D4 for i7-5600U = BIOS Mod to enable MEBx >> MiniMEBx (Default was None) -
I'm pretty sure you need MEBx for vPRO, if not we can put this back to default later if necessary

* Edit -
Hey! I see ONLY 40650/40651 microcodes in default BIOS, this means it was never 5500U CPU either, since it has same 306D4 CPUID as 5600U - if it was 5500U before, then no mods would be needed!
So, vPRO/ME FW aside, this is not the reason the system will not start, this system never compatible with 5500U either, so may not work at all with 306D4 (5500U/5600U)
40651 = Haswell ULT - 4th Generation Intel® Core™ Mobile Processor Family, Intel® Pentium® Mobile Processor Family, Intel® Celeron® Mobile Processor Family

306D4 = Broadwell U/Y - Intel® Core™ Processor i7-5650U,i7-5600U, i7-5557U, i7-5550U, i7-5500U, Intel® Core™ Processor i5-5350U, i5-5350,i5-5300U, i5-5287U,i5-5257U, i5-5250U, i5-5200U, Intel® Core™ Processor i3-5157U, i3-5020U, i3-5015U
i3-5010U, i3-5006U, i3-5005U, i3-5010U, i5-5350U, i7-5650U, Intel® Core™ Processor M-5Y71, M-5Y70, M-5Y51, M-5Y3, M-5Y10c, M -5Y10a, M-5Y10, Intel® Pentium® Processor 3805U, 3825U, 3765U, 3755U, 3215U, 3205U, Intel® Celeron® 3765U

I stop modding here for now, I don't think this is compatible attempt (Haswell >> Broadwell), not possible to make this CPU run on this BIOS without a lot of modification from a manufacturer

plutomaniac ^^ Correct, about MEBx? Additionally - AMT, MEBx need enabled at ME FW, correct?
Never mind, see my last thoughts, well I would like to know this info about vPRO/MEBx so I can know in the future I guess.

no problem, we find another cpu :)

Hello all.

I have an Alienware Area 51 R2. It has a X99 board in it, manufactured by MSI. I just bought a new ES 16 core E5 V4 to put in, but it won't boot. It works with an older 10 core ES, though.

Is there any way to add microcode to this? I know the CPU I am trying to get working works on all MSI retail boards.

Thanks, and sorry for being a noob.

Andrew.

@ammoune78 I just updated their latest BIOS-F24c to have the latest Microcodes ('cause I have X99-UD4 board too, obviously I won't do it for fun..). This is a .rom file so you might want to use DOS to flash it.

The link:
https://mega.nz/#!yNIyWSAb!k0jvN_k9NWtTL...DZNw5ExESK7oJ58

And I want to update the Intel-ME too (from 9.1 to 9.5, I think this is the last one which is still comfortable). Any help?

@Pandy - link me to the stock BIOS you are using. Also, please give me the model of the CPU you are using (and it's SSPEC since it's ES), or tell me it's CPUID if you know.
Or maybe @Blizz was replying to you above with BIOS? Blizz, do you mean you want the above file ME FW updated?

Hi. Sadly I don't have the bios. You can only get it as an exe set up program. I don't know if there's a way to extract the bios from that file.

If you go to dell you can get it there in support. The machine is an area 51 R2, the exe program can be grabbed there.

I am on vacation ATM until Friday,so I can't access it ATM.

The CPU I would like to use is a QHUY which is a 16/32 Broadwell ES. Again I don't have any more info right now.

I know the board is made by MSI for Dell.