@Lost_n_BIOS,

of course it is not possible to memorize eveything, just for your info:The Beginners Guide to Using a CH341A SPI Programmer/Flasher , Post #96! -> UP0104 is a converter, cannot be programmed.

But the BIOS on the bricked board is probably modded and flashed correctly. We will see!

@cyanno - Thanks, I see the post now So, why didn't you just solder that UP0104 back into it's original place?

@Lost_N_BIOS, just in the beginning, I tried so many time to get a connection between the UP0104 and the CH341A clip that I probably destroyed one leg of the UP0104, at least the pc was not working anymore. I just desoldered it afterwards, and now I´m waiting for the spare UP0104!

Well, it was not working before too though, correct? But yes, if you could see you destroyed a leg then nothing to do but replace, hopefully they'll arrive soon as your solder session will go smoothly

Can I use the add absent EFI module to say add a GOP module to an Asus Z390 BIOS that doesn't have it natively? I think one of the connectors on the backplate can use an adapter to output to a second screen if you do this.

The BIOS I mean is the Maximus XI Apex and Maximus XI Gene 1301 BIOS's.

I had a request for that mod, I just want to make sure it's actually feasable.

Yes, that may work, it would be similar to inserting NVME Mod, but you may need to adjust BIOS settings (hidden or not), or vBIOS/GOP settings, for the other display output to be active
It may just need some hidden BIOS setting changed, without any modules added

Zitat von Lost_N_BIOS im Beitrag #81

---

Yes, that may work, it would be similar to inserting NVME Mod, but you may need to adjust BIOS settings (hidden or not), or vBIOS/GOP settings, for the other display output to be active
It may just need some hidden BIOS setting changed, without any modules added

---

If it has GOP (UEFI Boot), then probably has vBIOS too (For legacy boot), both you can edit with Intel BMP if needed.
If you need BIOS menu edit, let me know motherboard and BIOS version, I will look and then let you know (probably ask you for image of xxx section of BIOS etc), then I can edit for you.

Zitat von Lost_N_BIOS im Beitrag #83

---

If it has GOP (UEFI Boot), then probably has vBIOS too (For legacy boot), both you can edit with Intel BMP if needed.
If you need BIOS menu edit, let me know motherboard and BIOS version, I will look and then let you know (probably ask you for image of xxx section of BIOS etc), then I can edit for you.

---

What kind of setting are you looking to find? You'll have to explain a bit more if you do not know the exact name, because I really didn't understand what you were trying to say above in your short comment (use an adapter to output to a second screen)?

Zitat von Lost_N_BIOS im Beitrag #83

---

If it has GOP (UEFI Boot), then probably has vBIOS too (For legacy boot), both you can edit with Intel BMP if needed.
If you need BIOS menu edit, let me know motherboard and BIOS version, I will look and then let you know (probably ask you for image of xxx section of BIOS etc), then I can edit for you.

---

@KedarWolf - What do you think that kind of setting would be named, or in what section? Did you look through the IFR's from setup? I've never seen anything like a "USB-Display" setting, so wouldn't recognize it's name probably.

I looked at every setting with USB, DP, and Display in it's name, nothing looked related to anything you mentioned. What motherboard from this brand and series has this option enabled by default, maybe I can see it that way?

Actually i am new in this field Can someone help me, where should i get all driver. to replace.

thanks in advance.

with Hp 640 g1 many dxe files are showing i am confused which dxe should i replace can anyone help me.
here i my dump Hp 640 g1