Problem with toshiba XG4 and windows 7

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � General: Storage Drivers (AHCI/RAID, NVMe and USB) � Problem with toshiba XG4 and windows 7

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | Problem with toshiba XG4 and windows 7 datum

Fri Sep 08, 2017 12:28 pm (Last edited: Fri Sep 08, 2017 1:15 pm)

HI everybody

I have a toshiba XG4 m2 256go ssd ( THNSF5256GPUK ) and I become crazy with an installation of windows 7 pro 64 on it.

After the install, my lenovo M710s reboot indefinitely. In safemode it stops at disk.sys file

However I use a modded windows 7 iso with KB2990941 and KB3087873 integrated. I test my iso in a regular hdd pc, no problem encountered

With "pure" 64bit OCZ NVMe driver v1.2.126.843 mod+signed by Fernando, windows installer tell me that there is no compatible driver for your peripheral.

If someone have encountered the same problem, please give me your info

Thanks in advance

reply

#2 | RE: Problem with toshiba XG4 and windows 7 datum

Fri Sep 08, 2017 5:44 pm

@chim57:
Welcome to the Win-RAID Forum!

If you know the HardwareIDs of the SSD's NVMe Controller, please post them.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#3 | RE: Problem with toshiba XG4 and windows 7 datum

Mon Sep 11, 2017 5:26 pm

Hello Fernando,

I have the same problem. My hardware ID PCI\VEN_1179&DEV_0115. Thank you.

reply

#4 | RE: Problem with toshiba XG4 and windows 7 datum

Mon Sep 11, 2017 5:54 pm

@NSpirit:
Welcome to the Win-RAID Forum!

My latest mod+signed 32/64bit OCZ NVMe drivers definitively do support the NVMe Controller of your specific Toshiba NVMe SSD.
The problem is, that you may not be able to use any driver from scratch, which has not been WHQL certified by Microsoft.
My tip: Use Win10 instead of Win7. In this case you will be able to get the OS installed onto the NVMe SSD (due to the in-box generic NVMe driver). Once the OS is running, you can manually replace the in-use MS NVMe driver by my mod+signed one, but you will have to force the installation by using the "Have Disk" option.
Note: You have to update the driver of the NVMe Controller, which is listed within the "Storage Controllers" section of the Device Manager. Don't try to update the driver of any device, which is listed within the "Disk drives" section.

Good luck!
Dieter (alias Fernando)

reply

Is there anyone who could give me a skhynix PC300 driver? � � 5 minute+ boot time with Intel USB 3.0 drivers running Intel 100 series/C230 Chipset

Please enter a reason for warning.