Forum - RE: new Intel RST(e) drivers v14.0.0.1095 available

#676 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Mon Apr 13, 2015 12:45 pm

Thank you. Will install right off the bat.

Actually this morning I installed v13.6 and did a test and hotswap worked again. I only could install it in the entry inside the "IDE ATA/ATAPI Controller", others like in the "Serial Bus Controller" section won't update.

reply

#677 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Mon Apr 13, 2015 1:19 pm

Zitat von Dogway im Beitrag #676
I only could install it in the entry inside the "IDE ATA/ATAPI Controller", others like in the "Serial Bus Controller" section won't update.

The Intel SATA AHCI Controller, which is using the Intel AHCI driver, is always listed within the "IDE ATA/ATAPI Controllers" section, whereas RAID users will find the Intel SATA RAID Controller within the "Storage Controllers" section of the Device Manager.
Intel's RST/RSTe drivers have nothing to do with Intel's SMBus Controller, which doesn't use/need any driver (just an INF file).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#678 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 4:15 am

I installed the drivers on console on windows 7 x64. For some reason when I run the console I don't see anything. It is just a window that's empty (background). Any idea what to do?

reply

#679 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 4:40 am

I am also now using Intel RST(e) RAID ROM 14.0.0.2198 on my Asus Rampage V Extreme without any issues.

I have tried the Intel(R) RST/RSTe Drivers 14.x beta drivers in RAID 0 mode without any issues. I am
still primary using the RST/RSTe 13.x Drivers for now until the Intel(R) RST/RSTe 14.x Drivers comes
out of beta and are released as Final WHQL.

reply

#680 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 9:43 am

I am successfully using both 14.x RST and OROM (SataDriver) on my Z77 RAID.
Performance similar to latest 13.x.

LIBERATE TUTE ME EX INFERIS

My current System:
i7-3770K @ 4.8 GHz, PH-TC14PE; Maximus V GENE (Z77); Redline 1866MHz 16GB; SAPPHIRE NITRO Radeon R9 FURY 4G HBM; Acer XR341CK; GAMMIXS11Pro 1TB; 850PRO 256GB; ST3500418AS 500GB, ST3000DM001 3TB, DT01ACA300 3TB, ST8000VN0022 8TB; HX850; AD-7240S; Centurion 590; Corsair HX850; G500s, K800; Flash Voyager GT USB 3.0 64GB; ASUS RT-AC87U; Windows 10 Pro x64.

reply

#681 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 10:34 am

@ charliejoe:
Welcome at Win-RAID Forum!

Questions:
1. What sort of chipset has your mainboard?
2. With which SATA mode (AHCI/RAID) is your on-board Intel SATA Controller running?
General advice:
Before you install any new Intel RST/RST(e) Drivers & Software Set, you should uninstall the previously used one from within the Control Panel ("Add/Remove Programs").

Zitat von charliejoe im Beitrag #678
Any idea what to do?

Uninstall the "Intel(R) Rapid Storage Technology" software from within the Control Panel, reboot and reinstall the desired Intel RST Drivers & Software Set.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#682 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 3:51 pm

The drivers work. It's the console that seems to run but doesn't display anything. I don't think it's because of the drivers. BTW, is there any other way I can tell the status of the RAID without the console? To see if any of the drives are bad?

reply

#683 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 4:07 pm

Zitat von charliejoe im Beitrag #682
It's the console that seems to run but doesn't display anything.

The Intel RST Software (incl. the RST Console) requires .NET Framework v3.5 for a proper usage. The .NET Framework v3.5 has to be installed as additional MS feature (look into the Control Panel > "Programs"), before you are going to install the Intel RST Software.
This is the best order:
1. Uninstall your currently running Intel RST Software from within the Control Panel.
2. Install .NET Framework 3.5.
3. Reboot.
4. Install the desired Intel RST Drivers & Software Set.
5. Reboot.
6. Run the Intel RST Console Software.

Zitat
BTW, is there any other way I can tell the status of the RAID without the console? To see if any of the drives are bad?

Yes, you will get access to the Intel RAID Utility either by hitting CTRL+I while (re)booting or by entering the BIOS and opening the "Intel(R) Rapid Storage Technology" tab. The available option depends on the sort (LEGACY/UEFI mode) of your BIOS settings.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#684 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 8:08 pm

I installed mine from the supermicro site. It's the same driver version as I am using a supermicro X10SLL-F motherboard.
I've been having regular BSOD crashes though that have to do with the iaStor driver. I'm thinking maybe I should downgrade the driver then.
The ROM I have for the IRSTe is SATA Option ROM - 3.7.0.1049 - what version of the drivers do you think I should use instead?

reply

#685 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 8:24 pm

@ charliejoe:

Without knowing the chipset of your PC and the SATA mode of your system drive I cannot give you any recommendations regarding the Intel RST drivers.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#686 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 9:11 pm

Its the C220 chipset. The system drive is the Raid 1 drive. That's all I have on the machine, 2 1TB drives in raid 1.

reply

#687 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 9:44 pm

Zitat von charliejoe im Beitrag #686
Its the C220 chipset. The system drive is the Raid 1 drive. That's all I have on the machine, 2 1TB drives in raid 1.

Thanks for the response.
It is hard to believe, that your mainboard has an Intel 8-Series/C220 chipset, but within the BIOS an Intel RAID ROM v3.7.0.1049, which is typical for C600 Series Chipsets.
Please give me the name of your mainboard. Then I can look for the details at the website of the manufacturer.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#688 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 10:07 pm

I wrote it above: X10SLL-F motherboard

reply

#689 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Tue Apr 14, 2015 10:33 pm (Last edited: Tue Apr 14, 2015 10:36 pm)

Zitat von charliejoe im Beitrag #688
I wrote it above: X10SLL-F motherboard

Ok, I found it at the Super Micro sites.
Your mainboard has an Intel C222 Chipset and not a C220 as you had written.
Super Micro recommends for your mainboard to take the Intel RSTe RAID driver v4.1.0.1046/1047 (look >here<).
If you should have problems with the v4.1.0.1046 driver, I recommend to install the Intel RSTe driver v3.8.1.1006.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#690 | RE: new Intel RST(e) drivers v14.0.0.1095 available datum

Wed Apr 15, 2015 12:24 am

Thanks, I downgraded the driver to the one you recommended. That one is stable right?
I saw that you pulled the new ones actually, as Intel admitted there were bugs.

reply

Please enter a reason for warning.