* 4. COMMAND LINE UTILITY USAGE
************************************************************

USAGE:

Create Options:
| Flag | Name |
| -C | --create |
| -E | --create-from-existing |
| -l | --level |
| -n | --name |
| -s | --stripe-size |
| -z | --size |
| | --rrt |
| | --rrtMaster |
| | --rrtUpdate |

Create Usage:
Creates a new volume and array or creates a new volume on an existing array.
--create --level x --name string
diskId {[diskId]}

Create Examples:
-C -l 1 -n Volume 0-1-0-0 0-2-0-0
--create -l 0 -z 5 --name RAID0Volume 0-3-0-0 0-4-0-0 0-5-0-0
-C -l 1 -E 0-1-0-0 -n VolumeWithData 0-2-0-0
-C --rrt -n RRTVolume 0-1-0-0 0-2-0-0 --rrtMaster 0-1-0-0
-C --rrt -n RRTVolume 0-1-0-0 0-2-0-0 --rrtUpdate Continuous
--create --help


Information Options:
| Flag | Name |
| -I | --information |
| -a | --array |
| -c | --controller |
| -d | --disk |
| -v | --volume |
| | --comma |

Information Usage:
Displays disk, volume, array, and controller information.
--information --controller|--array|--disk|--volume
{[device]}

Information Examples:
-I -v Volume
-I -d 0-5-0-0
-I --comma
-I -v --comma
-I -d 0-2-0-0 --comma
--information --array Array_0000
--information --help


Manage Options:
| Flag | Name |
| -M | --manage |
| -x | --cancel-verify |
| -D | --delete |
| -p | --verify-repair |
| -f | --normal-volume |
| -F | --normal |
| -i | --initialize |
| -L | --locate |
| -T | --delete-metadata |
| -N | --not-spare |
| -P | --volume-cache-policy |
| -R | --rebuild |
| -S | --spare |
| -t | --target |
| -U | --verify |
| -w | --write-cache |

Manage Usage:
Manages arrays, volumes and disks present in the storage system.
--manage --cancel-verify volumeName
--manage --delete volumeName
--manage --verify-repair volumeName
--manage --normal-volume volumeName
--manage --normal diskId
--manage --initialize volumeName
--manage --locate diskId
--manage --delete-metadata diskId
--manage --not-spare diskId
--manage --volume-cache-policy off|wb --volume volumeName
--manage --rebuild volumeName --target diskId
--manage --spare diskId
--manage --verify volumeName
--manage --write-cache true|false --array arrayName

Manage Examples:
--manage --spare 0-3-0-0
-M -D VolumeDelete
-M --normal 0-2-0-0
--manage -w true -array Array_0000
-M -U VolumeVerify
--manage --help


Modify Options:
| Flag | Name |
| -m | --modify |
| -A | --Add |
| -X | --expand |
| -l | --level |
| -n | --name |
| -s | --stripe-size|
| -v | --volume |

Modify Usage:
Modifies an existing volume or array.
--modify --volume VolumeName --add diskId {[diskId]}
--modify --volume VolumeName --expand
--modify --volume VolumeName --level L }

--modify --volume VolumeName --name n

Modify Examples:
-m -v Volume_0000 -A 0-3-0-0 0-4-0-0
-m --volume ModifyVolume --level 5
--modify -v Volume -n RenameVolume
--modify --help


Accelerate Options:
| Flag | Name |
| | --createCache |
| | --setAccelConfig |
| | --disassociate |
| | --reset-to-available |
| | --accel-info |
| | --cache-size |
| | --disk-to-accel |
| | --volume-to-accel |
| | --mode |
| | --cache-volume |
| | --loadCache |
| | --stats |

Accelerate Usage:
Accelerates a given disk or volume with the specified SSD disk.
--accelerate --createCache|--setAccelConfig|--disassociate|
--reset-to-available|--accel-info
--accelerate --createCache --SSD
--accelerate --setAccelConfig --disk-to-accel |
--volume-to-accel --mode enhanced | maximized | off
--accelerate --disassociate --cache-volume
--accelerate --reset-to-available --cache-volume
--accelerate --accel-info
--accelerate --loadCache --recurse
--accelerate --stats

Accelerate Examples:
--accelerate --createCache --SSD 0-3-0-0 --cache-size 30
--accelerate --setAccelConfig --disk-to-accel 0-5-0-0 --mode enhanced
--accelerate --setAccelConfig --volume-to-accel MyVolume --mode maximized
--accelerate --disassociate --cache-volume Cache_Volume
--accelerate --reset-to-available --cache-volume Cache_Volume
--accelerate --accel-info
--accelerate --loadCache "C:\*" --recurse
--accelerate --loadCache "C:\Windows\*" --recurse -q
--accelerate --stats
--accelerate --help


OPTIONS:

-A <<host>--->, --add <<host>--->
Adds new disks to an existing volume.

-a, --array
Lists information about the arrays in the storage system.

--accel-info
Lists information about Accelerate settings.

--accelerate
Accelerates a given disk or volume with the specified SSD disk.

-C, --create
Creates a new volume and array or creates a new volume on an existing
array.

-c, --controller
Lists information about the controllers in the storage system.

--cache-size
Sets a size in gigabytes for the cache memory. This is an optional
switch. If the size is not specified, the complete size of the SSD
will be used for acceleration.

--cache-volume
Specifies a name for the volume used as cache.

--createCache
Creates the cache.

-D , --delete
Deletes the specified volume.

-d, --disk
Lists information about the disks in the storage system.

--disassociate
Disassociates the Cache volume from acceleration

--disk-to-accel <<host>--->
Specifies a disk if accelerating a pass-through disk.

--dynamic-storage-accelerator
Enable/Disable Dynamic Storage Accelerator.

-E <<host>--->, --create-from-existing
<<host>--->
Identifies the disk if data is to be migrated from one of the disks.
Disk identifier is SCSI address.

-F <<host>--->, --normal
<<host>--->
Resets failed or SMART event disk to normal.

-f , --normal-volume
Resets failed RAID 0 volume to normal and recovers data.

-h, --help
Displays help documentation for command line utility modes, options,
usage, examples, and return codes. When used with a mode switch
(create, information, mange, modify, or accelerate), instructions for
that mode display. For example, --create --help displays Create option
help.

-I, --information
Displays disk, volume, array, and controller information.

-i , --initialize
Initializes the redundant data on a RAID 1, 5 or 10 volume.

-L <<host>--->, --locate
<<host>--->
Locates device and blinks the LED.

-l <0, 1, 5, 10>, --level <0, 1, 5, 10>
Changes the Raid type of an existing volume. Options are migrations
from RAID 1 to RAID 0 or 5, RAID 0 to RAID 5, and RAID 10 to RAID 5.

-loadCache
Loads content into the NV cache. Does support wildcards "*".

-M, --manage
Manages arrays, volumes and disks present in the storage system.

-m, --modify
Modifies an existing volume or array.

--mode
Specifies Accelerate mode as Enhanced or Maximized.

-N <<host>--->, --not-spare
<<host>--->
Resets a spare disk to available.

-n , --name
Specifies a name for the volume created. Renames an existing volume in
Modify mode.

-P , --volume-cache-policy
Sets volume cache policy to either off or wb.

-p , --verify-repair
Verifies and repairs the volume.

-q, --quiet
Suppresses output for create, modify, and manage modes. Not valid on
info mode.

-R , --rebuild
Rebuilds the degraded volume.

-r, --rescan
Forces the system to rescan for hardware changes.

--recurse
To directory recurse When loading content into the NV cache.

--reset-to-available
Resets the cache volume to available.

--rrt
Creates a recovery volume using Intel(R) Rapid Recovery Technology
(RRT).

--rrtMaster <<host>--->
Optionally creates a recovery volume that allows you to select a
specific disk as the master disk. Default is the first disk in the
disk list.

--rrtUpdate
Specifies a data update setting when creating a recovery volume as
Continuous or OnRequest. Default is Continuous.

-S <<host>--->, --spare <<host>--->
Marks a disk as a spare.

--SSD <<host>--->
Specifies SSD disk that will be used as cache. If another SSD is being
used as cache, then that volume needs to be deleted to use a new SSD
disk.

-s , --stripe-size
Sets a stripe size in kilobytes (2^10 bytes) for a volume. Valid when
creating or changing the type of a volume and for RAID 0, RAID 5 and
RAID 10. Options are 4, 8, 16, 32, 64 and 128 KB.

--setAccelConfig
Sets the config for accelerating a volume or disk.

--stats
Provides statistical information about the NV cache.

-T <<host>--->, --delete-metadata
<<host>--->
Deletes the metadata from the specified disk.

-t <<host>--->, --target
<<host>--->
Indicates the pass-through disk to be used for rebuilding a degraded
volume.

-U , --verify
Verifies data on the volume.

-u , --unlock
Unlocks a disk.

-V, --version
Displays version information.

-v, --volume
Lists information about the volumes on the system. Stipulates the
volume to act on when used in Modify or Manage mode.

--volume-to-accel
Specifies a name of the volume to be accelerated.

-w , --write-cache
Enables or disables write cache for all disks that are part of an
array.

-X, --expand
Expands a volume to consume all available space in an array.

-x , --cancel-verify
Cancels a verify operation in progress.

-z , --size
Sets a size in gigabytes. This is an optional switch. If the size is
not specified or specified to 0, then the maximum size available will
be used.