Preliminary notes:
Many AHCI and RAID users are unsure or don't even know, which AHCI/RAID driver will give them the best results regarding stabilty and performance. They either don't have the time or are not interested to do intensive tests comparing the different types and versions of the available AHCI/RAID drivers, which are or may be suitable for their system.
It is a fact, that there are no drivers available, which will be optimal for everyone. Simple reason: Each system (Hardware + Software) is different and the preferences of the users as well. This makes it very problematic to give any recommendation regarding the choice of the AHCI/RAID driver.
Nevertheless I started this thread with the intention to help unsure users to find "the needle in the hay".

How to get AHCI/RAID/NVMe drivers installed:
There are at least 2 different ways to change the driver of an AHCI/RAID/NVMe Controller:
a) by running an associated installer (= *.exe file) or
b) manually from within the Device Manager (this is the method I prefer).

Notes regarding the manual installation:

• The related AHCI/RAID/NVMe Controllers can be found either within the "IDE ATA/ATAPI Controllers" or within the "Storage Controllers" section of the Device Manager (don't try to update the driver of any device, which is listed within the "Disk drives" section!).
• If you are unsure, which of the listed Controllers is the one, whose driver you want to update, check the HardwareIDs of all listed Controllers (right-click onto it > "Properties" > "Details" > "Property" > "HardwareIDs").
• When the installation fails with the message, that the "best driver is already running", you can force the installation by using the "Have Disk" button (after having made sure, that the chosen driver and INF file are matching!).

• a) "Old fashion" AMD SATA AHCI/RAID Drivers
  
  Download links and infos:
  
  
  AMD's "pure" SATA AHCI Drivers (only AHCI mode supported)
  
  

  1. for Win8/8.1/10 (32/64bit):
     • These are the latest officially released AMD AHCI drivers dated 03/19/2015, WHQL certified and suitable for AMD AHCI Controllers DEV_4391/4394, DEV_7801/7804 and DEV_7901/7904:
       • >32bit AMD AHCI Driver v1.3.1.276 WHQL for Win8-10< (>MIRROR<)
       • >64bit AMD AHCI Driver v1.3.1.276 WHQL for Win8-10 x64< (>MIRROR<)
     • Here is the latest 64bit AMD AHCI driver (dated 04/15/2015), mod+signed by me at 12/26/2017 to make it installable and usable for AMD AHCI Controllers DEV_4391/4394, DEV_7801/7804 and DEV_7901/7904 (no 32bit variant available):
       • >64bit Win7-10 AMD AHCI Driver v1.3.1.277 mod+signed by Fernando< (>MIRROR<)
         Note: Don't forget to import the attached Win-RAID CA Certificate before you try to get this driver installed (right-click onto the file named "Import Win-RAID CA.cmd" and choose the option "Run as Admin"). Any feedback is much appreciated.
     • Here are older AMD AHCI drivers (dated 03/21/2014), only suitable for AMD AHCI Controllers DEV_ 4391/4394 and DEV_7801/7804, but maybe better performant than the previous ones:
       • >32bit AMD AHCI Driver v1.3.1.220 WHQL for Win8/8.1< (>MIRROR<)
       • >64bit AMD AHCI Driver v1.3.1.220 WHQL for Win8/8.1 x64< (>MIRROR<)
  2. for Win7/Vista (32/64bit):
     • These are the newest AMD AHCI drivers (dated 03/29/2015), WHQL certified and suitable for AMD AHCI Controllers DEV_4391/4394, DEV_7801/7804 and DEV_7901/7904:
       • >32bit AMD AHCI Driver v1.2.1.402 WHQL for Win7 x86< (>MIRROR<)
       • >64bit AMD AHCI Driver v1.2.1.402 WHQL for Win7 x64< (>MIRROR<)
     • Here are older (dated 11/06/2013), but maybe better performant AMD AHCI drivers than the latest ones (look >here<), natively supported are DEV_4391/4394 and DEV_7801/7804:
       • >32bit AMD AHCI Driver v1.2.1.359 WHQL for Win7 x86< (>MIRROR<)
       • >64bit AMD AHCI Driver v1.2.1.359 WHQL for Win7 x64< (>MIRROR<)

  
  
  AMD's "pure" SATA RAID drivers (only RAID mode, not for modern AMD RAID systems)
  
  

  1. for Win10 (32/64bit):
     • >32bit Win10 AMD SATA RAID Driver for DEV_7805 v6.1.5.25 WHQL< (>MIRROR<)
     • >64bit Win10 AMD SATA RAID Driver for DEV_7805 v6.1.5.25 WHQL< (>MIRROR<)
       These AMD RAID drivers are dated 07/26/2016 and suitable only for AMD RAID Controllers DEV_ 7805 (model "Bolton"). They have been designed for Win10, but may work with Win7/8.1 as well.
  2. for Win8/8.1 (32/64bit):
     • >32bit Win8 AMD SATA RAID Driver v3.8.1540.14< (>MIRROR<)
     • >64bit Win8 AMD SATA RAID Driver v3.8.1540.14< (>MIRROR<)
       These AMD RAID drivers are dated 10/08/2013 and suitable for AMD RAID Controllers DEV_ 4392, DEV_4393, DEV_7802 and DEV_7803.
  3. for Win7/Vista (32/64bit):
     • >32bit Win7Vista AMD SB7xx/8xx SATA RAID Driver v3.3.1540.40 WHQL< (>MIRROR<)
     • >64bit Win7Vista AMD SB7xx/8xx RAID Driver v3.3.1540.40 WHQL< (>MIRROR<)
       These AMD RAID drivers are dated 12/10/2012 and suitable for AMD RAID Controllers DEV_4392, DEV_4393, DEV_7802 and DEV_7803. Thanks to Pacman for the drivers.
• b) Modern AMD SATA/NVMe RAID Drivers and AMD StoreMI Drivers
  
  Download links and infos:
  
  
  for AMD SATA/NVMe RAID Systems:

  • Latest "pure" AMD SATA/NVMe RAID drivers (for modern AMD Chipsets from X399 up)
    • >64bi AMD SATA+NVMe RAID Drivers v9.3.0.266 WHQL for Win10 x64< (>MIRROR<)
      These drivers are dated 03/10/2021 and only usable with the AMD SATA RAID Controllers DEV_7905, DEV_43BD, DEV_7916 and DEV_7917 resp. with the AMD NVMe Controller DEV_B000 running Win10 x64, but may support Win8.1 x64 as well.
    • >64bi AMD SATA+NVMe RAID Drivers v9.3.1.22 WHQL for Win10 x64< (>MIRROR<)
      These drivers are dated 02/22/2021 and only usable with the AMD SATA RAID Controllers DEV_7905, DEV_43BD, DEV_7916 and DEV_7917 resp. with the AMD NVMe Controller DEV_B000 running Win10 x64. Thanks to bobypf for the driverpack.
  • Latest complete AMD RAID Drivers & Software Set:
    • >AMD RAID Installer Set v2.17.05.2306 for Win10/11 x64< (>MIRROR<)
      This Installer Set has been released by AMD on 05/25/2021. It installs the Win10 x64 AMD RAID drivers v9.3.0.266 WHQL dated 03/10/2021.

  
  b) for AMD StoreMI Systems:

  • >64bit AMD StoreMi SATA Drivers v9.4.0.48 WHQL for Win10/11 x64< (>MIRROR<)
    These drivers are dated 08/30/2021 and only usable with disk drives, which are connected to the AMD SATA AHCI Controllers DEV_7901, DEV_43B6, DEV_43EB or DEV_43C8 running Win10/11 x64. The AMD StoreMi Technology is able to boost the performance of a HDD by creating a sort of RAID array with an SSD. For details look >here<. Thanks to Tom886 for the driverpack.
  • >AMD StoreMI Installer Set v2.1.0.205 for Win10-11 x64< (>Mirror<)
    This Installer Set is dated 11/07/2021 and installs the currently latest AMD StoreMI drivers.

• a) Intel SATA AHCI/RAID Drivers
  
  Download links and infos:
  
  
  
  Intel RST/RST(e) drivers:
  (usable with nearly all Intel chipset systems)
  

  1. Intel RST drivers v11.2.0.1006
     (dated 05/30/2012, recommended for all AHCI/RAID users with an Intel Southbridge from ICH7R/M up, usable with all Windows Operating Systems from XP up):
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     b) Modded Drivers and Sets:
     • You can find the related download links >here<.
     
     Compatibility:
     • AHCI mode: The WHQL certified 32/64bit drivers v11.2.0.1006 do not support ICH8R/M, ICH9R, ICH8/9/10, X79 and 8-Series chipset AHCI systems, whereas the modified drivers do support all Intel AHCI systems from ICH7R/M up.
     • RAID mode: The WHQL certified 32/64bit drivers v11.2.0.1006 do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers do support all Intel RAID systems from ICH7R/M up.
     
     Comments:
     • These are the latest and probably last "classical" Intel RST AHCI/RAID drivers, which are managing the Intel SATA AHCI/RAID Controller with just 1 single driver named iaStor.sys.
     • "TRIM in RAID0" is supported (Precondition: An actual Intel RAID ROM or EFI RAID "SataDriver" from the v11.2 series or a TRIM in RAID0 modded Intel RAID module is present within the BIOS).
     • Advantages:
       a) They are running absolutely stable and will give the users AHCI/RAID system a very good performance (especially if being used with SSD RAID0 configuration).
       b) They are the last Intel AHCI/RAID drivers, which do fully support Windows XP (32/64bit).
     • Disadvantage:
       Not all features of the newest Intel chipsets will be supported.
  
  
  2. Intel RST(e) drivers v12.9.4.1000
     (dated 04/24/2014, recommended for all AHCI/RAID users with an Intel 5-, 6- or 7-Series Chipset system, only usable with Windows Operating Systems from Win7 up):
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     b) Modded Drivers and related original Software Set:
     • You can find the related download links >here<.
     
     Compatibility:
     • AHCI mode: The original 32/64bit drivers v12.9.4.1000 WHQL do not support any Intel ICH7-ICH10 Southbridge, whereas the modified drivers do support them additionally.
     • RAID mode: The original 32/64bit drivers v12.9.4.1000 WHQL do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers may support them additionally.
     
     Comments:
     • These are the latest of Intel's AHCI/RAID drivers of the v12 series and primarily designed for the Intel 6- and 7-Series Chipsets.
     • Contrary to the "classical" Intel RST drivers the RST(e) drivers are working with an additional SCSI filter driver named iaStorF.sys.
     • "TRIM in RAID0" is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID "SataDriver" from v11 up is present within the BIOS).
     • Advantage:
       These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.
     • Disadvantage:
       The WRITE performance with Intel RAID0 systems is not as good as with the "classical" Intel RST driver v11.2.0.1006.
  
  
  3. Intel RST(e) drivers v13.1.0.1058
     (dated 05/02/2014, recommended for all AHCI users with an Intel 7-Series or X79/X99 Chipset system, only usable with Windows Operating Systems from Win7 up):
     
     Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     Compatibility:
     • AHCI mode: The original 32/64bit drivers v13.1.0.1058 WHQL do support all Intel 7-, 8- and 9-Series Chipsets (incl. X79 and X99 Chipsets).
     • RAID mode: The original 32/64bit drivers v13.1.0.1058 WHQL do support all Intel Southbridges/Chipsets from ICH8R up and X79/X99 Chipset running in RST mode (DEV_2822).
     
     Comments:
     • These are the latest of Intel's AHCI/RAID drivers, which natively do support Intel 7-Series Chipsets.
     • Contrary to the "classical" Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).
     • "TRIM in RAID0" is supported (Precondition: An up-to-date Intel RAID ROM or EFI RAID "SataDriver" from v11 up or a TRIM in RAID0 modded RAID module is present within the BIOS).
     • Advantage:
       These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.
     • Disadvantage:
       The WRITE performance with Intel RAID0 systems is not as good as with the "classical" Intel RST driver v11.2.0.1006.
  
  
  4. Intel RST(e) drivers v13.2.8.1002
     (dated 07/09/2015, recommended for all AHCI users with an Intel 8- or 9-Series Chipset system, only usable with Windows Operating Systems from Win7 up):
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     b) Modded Drivers and related original Software Set:
     • You can find the related download links >here<.
     
     Compatibility:
     • AHCI mode: The original 32/64bit drivers v13.2.8.1002 WHQL do support all Intel Chipsets from 8-Series up.
     • RAID mode: The original 32/64bit drivers v13.2.8.1002 WHQL do support all Intel Southbridges/Chipsets from ICH8R up and X79/X99 Chipset running in RST mode (DEV_2822).
     
     Comments:
     • These are the latest Intel AHCI/RAID drivers, which have been optimized for being used with Intel 8- and 9-Series Chipsets.
     • Contrary to the "classical" Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).
     • "TRIM in RAID0" is supported (Precondition: A matching Intel RAID ROM or EFI RAID "SataDriver" module is present within the BIOS).
     • Advantage:
       These drivers do support some new features, which partially can be used with older Intel AHCI/RAID systems.
     • Disadvantage:
       The WRITE performance with Intel RAID0 systems is not as good as with the "classical" Intel RST driver v11.2.0.1006.
  
  
  5. Intel RST(e) drivers v14.8.18.1066
     (dated 09/06/2017, recommended for all AHCI/RAID users with an Intel 8-/9-Series chipset system and for Intel X99 Chipset systems running in AHCI mode, only usable with Windows Operating Systems from Win7 up):
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     b) Modded Drivers and related original Software Sets:
     • You can find the related download links >here<.
     
     Compatibility:
     • AHCI mode: The original 32/64bit drivers v14.x.x.xxxx do not support any Intel ICH7-ICH10 Southbridge or 5-7 Series Chipset system, whereas the modified drivers do support them additionally.
     • RAID mode: The original 32/64bit drivers v14.x.x.xxxx do not support ICH7R/ICH7M and X79 chipset RAID systems, whereas the modified drivers may support them additionally.
     
     Comments:
     • These are the currently latest Intel AHCI/RAID drivers of the v14 platform and primarily designed for the Intel 100-Series and Z99 Chipsets.
     • Contrary to the "classical" Intel RST drivers the RST(e) drivers have an additional SCSI filter driver named iaStorF.sys (not relevant for Win8/10).
     • "TRIM in RAID0" is supported (Precondition: A matching Intel RAID ROM or EFI RAID "SataDriver" is present within the BIOS).
     • Advantage:
       These drivers do support some new features, which partially can be used by users with an Intel AHCI/RAID system, which is not up-to-date anymore.
     • Disadvantage:
       The performance with Intel RAID0 systems has not yet been fully optimized by Intel.
     • Alternative for Intel 8-/9-Series Chipset AHCI/RAID systems:
       A good alternative is the usage of the very fast and stable running Intel RST(e) drivers v13.2.8.1002, which can be found >here< (original drivers) resp. >here< (modded drivers).
  
  
  6. Intel RST(e) drivers v15.9.8.1050 (dated 07/31/2019),
     recommended for AHCI/RAID users with an Intel 100-, 200- or 300-Series chipset system, usable with Windows Operating Systems from Win7 up:
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.
     
     b) Modded Drivers and related original Software Sets:
     • You can find the related download links >here<.
     
     Compatibility:
     • AHCI mode: The original 32/64bit drivers v15.x.x.xxxx WHQL do only support Intel 100-, 200- and some 300-Series Chipset systems.
     • RAID mode: The original 32/64bit drivers v15.x.x.xxxx WHQL may be installable with older Intel Chipsets/Southbridges from ICH8R up (due to the universal external DeviceID DEV_2822), but will only work flawlessly with Intel 100-/200-Series Chipset systems.
     
     Comments:
     • Due to the problems the user may get once the related driver is running, I do not really recommend to install any Intel RST(e) driver of the v15 platform onto an older Intel system (incl. Intel 8/9-Series and X99 Chipsets).
  
  
  7. Intel RST driver v17.11.0.1000 (dated 09/30/2021) or Intel RST driver v18.36.4.1022 (dated 09/03/2021),
     recommended for AHCI/RAID users with an Intel 300- or 400-Series chipset system, usable only with Win10 x64:
     
     a) Original Drivers and Sets:
     • The related download links can be found within the start post of >this< thread.

  
  
  Intel RST Enterprise drivers:
  (only usable with C600/C600+ Series Chipsets like X79, X99 or X299 running in RSTe mode)
  

  1. Intel RSTe drivers v4.7.0.1098
     (dated 11/24/2017, recommended for X79/X99 Chipset systems with an Intel RSTe SATA or sSATA Controller, available is the support of Win7 and Win8-10)
  2. Intel RSTe drivers v5.5.0.1334
     (dated 08/03/2018, recommended for X99/X299 Chipset systems with an Intel RSTe SATA or sSATA Controller, only usable with Win8-10 x64)
  3. Intel RSTe drivers v6.3.0.1022
     (dated 01/13/2020, recommended for X99/X299 Chipset systems with an Intel RSTe SATA or sSATA Controller, only usable with Win8-10 x64)
  4. Intel RSTe RAID drivers v7.0.0.2286
     (dated 04/20/2020, recommended for X299 Chipset systems with an Intel RSTe SATA or sSATA Controller runnimg in "RAID" mode, only usable with Win8-10 x64)

  
  Original Drivers and Sets:

  • The related download links can be found within the start post of >this< thread.
• b) Intel NVMe Drivers
  
  Download links and infos:
  
  
  1. Latest specific Intel NVMe drivers
     • original drivers:
       • >32bit Intel NVMe Driver v5.3.0.1005 WHQL< (>MIRROR<)
       • >64bit Intel NVMe Driver v5.3.0.1005 WHQL< (>MIRROR<)
       Notes: These Intel NVMe drivers are dated 08/26/2021, WHQL certified and usable with all Intel NVMe SSDs of the P3700/P3600/P3500/P3520/750 Series (DEV_0953), DC P3520 Series (DEV_0A53), DC P4500/4600/4501/4601/4608/4510/4610/4511 Series (DEV_0A54), DC P4600 Series (DEV_0A55), Pro 7600p/760p/E 6100p Series (DEV_F1A6), 660p Series (DEV_F1A8), 665p Series (DEV_FAF0), Optane 900p/905p Series (DEV_2700), Optane P4800x Series (DEV_2701), D7-P5500/P5600 Series (DEV_0B60), Optane DC P5800X Series (DEV_4140) and P1600X Series (DEV_2525). Supported are only Windows Operating Systems from Win8.1 up.
       • >Intel NVMe Drivers Installer Set v5.3.0.1005 WHQL< (>MIRROR<)
       Notes: This Installer Set is dated 09/10/2021 and installs the above mentioned 32/64bit Intel NVMe drivers.
     • mod+signed drivers:
       • >64bit Intel NVMe Driver v5.3.0.1005 mod+signed by me< (>MIRROR<)
       Notes: This Intel NVMe driver is dated 08/26/2021 and has been modified and digitally signed by me on 10/12/2021. It is usable with all Intel NVMe SSD Controllers, which are supported by the original drivers, but additionally they support the NVMe Controllers of the "Intel 600P Series" (DEV_F1A5) and "Intel Optane ME10 Series" (DEV_2522 and DEV_A2BA). Supported are all Windows Operating Systems from Win8.1 up.
  2. Latest Intel NVMe drivers from the RSTe v7 platform
     • original drivers:
       • >64bit Intel RSTe NVMe Driver v7.6.0.1020 WHQL for Win8-10 x64< (>MIRROR<)
         Notes: This Intel RSTe NVMe driver is dated 03/31/2021, WHQL certified and usable with all Intel NVMe SSDs of the P3700/P3600/P3500/P3520/750 Series (DEV_0953), DC P3520 Series (DEV_0A53), DC P4500/4600/4501/4601/4608 Series (DEV_0A54), DC P4600 Series (DEV_0A55), P5601/P5501 Series (DEV_0A60), Optane DC P4800X Series (DEV_2701) and Pro 7600p/760p/E 6100p HarrisHarbor Series (DEV_F1A6).
       • >64bit Intel VMD NVMe RAID Driver v7.6.0.1020 WHQL for Win8-10 x64< (>MIRROR<)
         Notes: This Intel driver is dated 03/31/2021, WHQL certified and only usable with DEV_201D and DEV_28C0 "Intel(R) Volume Management Device NVMe RAID Controllers".
       • >Intel VROC+NVMe+RAID Drivers & Software Set v7.6.0.1023 for Win8-10 x64< (>MIRROR<)
         Notes: This Installer Set is dated 04/21/2021 and installs the above listed Intel RSTe NVMe and VMD NVMe RAID drivers v17.6.0.1020 WHQL.
  3. Intel RST SATA RAID drivers from v14.8 series up do support NVMe RAID arrays!
     Supported are only modern Intel systems from 100-Series up, whose Intel SATA Controller has been set to RAID mode.
  4. All v16 and v17 platform Intel RST drivers do contain a generic NVMe driver!
     These Intel RST drivers are compatible with all NVMe SSDs. The installation has to be forced by using the "Have Disk" button and choosing the INF file named iaStorAC.inf. The SATA mode doesn't matter.

J. Microsoft's NVMe Hotfixes for Win7/W2k8 R2 (will install a generic NVMe driver)

Download links and infos:

1. All RAR archives have been packed by using WinRAR v5.xx. So you should use WinRAR v5.xx to get them successfully unzipped.
2. The listed AHCI/RAID drivers only belong to on-board AHCI and RAID Controllers. Other extern AHCI/RAID Controllers (on PCI cards etc.) have not been included.
3. The information (= .INF) files of some linked driverpacks have been customized by me to make the associated drivers usable with as many different Controllers as possible. Although I have done my very best while customizing the INF files, the use of the "modded" driverpacks will be at own risk. Before you install any of my "modded" driverpacks, you should have read the last chapter of >this< start post.
4. All linked XP and XP x64 AHCI and RAID drivers are already prepared for an easy and successful integration into a Windows XP resp. XP x64 CD.
5. Some of the linked XP driverpacks differ from the original driverpack regarding the folder structure and the content of the file named TXTSETUP.OEM, which is needed at the beginning of the XP installation to detect the HDD/SSD/RAID. The only reason for my customization was to make the AHCI/RAID driver integration as easy as possible and to minmize the risk of a later XP installation failure. None of my modifications has any impact on the functionality of the real drivers (= .SYS files), which have always left absolutely untouched.
6. If I should have forgotten the drivers of an important on-board AHCI/RAID Controller or if you should find a newer resp. better driver, please let me know it (with a link to the related driver).

Hi
Here is AMD RAID driver, 3.8.1540.7
For Win8, Only 64bit.

Zitat von Pacman im Beitrag #4

---

Here is AMD RAID driver, 3.8.1540.7
For Win8, Only 64bit.

---

Zitat von Fernando im Beitrag #5

---

Zitat von Pacman im Beitrag #4

---

Here is AMD RAID driver, 3.8.1540.7
For Win8, Only 64bit.

---

Thanks for the driver. Where did you find it?
Interesting: According to the INF file this driver is dated 12/12/2012!

---

Zitat von Pacman im Beitrag #6

---

It is from HP, 3.8.1540.3 is 09/21/2012 though :)

---

Today (08/27/2013) I have updated the start post of this thread.

Changelog:

• 32/64bit Intel RST(e) AHCI & RAID drivers v12.8.0.1016 WHQL dated 08/02/2013
• Intel RST(e) Drivers & Software Set v12.8.0.1016 WHQL dated 08/09/2013
• 32/64bit Intel RST(e) AHCI & RAID drivers v12.8.0.1016 mod by Fernando
• 32/64bit Marvell 91xx/92xx AHCI & RAID drivers v1.2.0.1038 for Win8/Win7/Vista dated 06/20/2013
• 32/64bit Marvell 91xx/92xx AHCI & RAID drivers v1.2.0.1038 for XP/XPx64 dated 06/20/2013

Today (09/18/2013) I found within the AMD Catalyst Motherboard/IGP package 13.9 new AMD AHCI drivers for Win8.1, Win8 and Win7/Vista.
Meanwhile I have updated the start post of this thread.

Changelog:

• 32/64bit AMD AHCI drivers v1.3.1.156 WHQL for Windows 8.1 dated 07/23/2013
• 32/64bit AMD AHCI drivers v1.3.1.154 WHQL for Windows 8 dated 06/28/2013
• 32/64bit AMD AHCI drivers v1.2.1.349 WHQL for Win7Vista dated 06/27/2013

Zitat von jeroompje im Beitrag #10

---

please no italics (does not read nice)..

---

• new: Original 32/64bit Intel RST(e) drivers v12.8.2.1000 WHQL dated 08/30/2013
• new: Modded 32/64bit Intel RST(e) drivers v12.8.2.1000
• new: Intel RST(e) Drivers & Software Set v12.8.2.1000 WHQL dated 09/06/2013

@ abanerus:

Hello Bunty,
welcome at Win-RAID Forum!

Zitat von abanerus im Beitrag #12

---

I slip-streamed your AMD SATA drivers on a clean WinXP-32 via nLite. But for a newer Acer Aspire 5250 laptop (came w/ Win7-64) I get an error 'amd_sata.sys not found'. Should I rename the file/s or modify txtsetup.oem?

---

1. The media is bad and cannot been read by the OS Setup. > Solution: Create/borrow a readable installation media.
2. The user has integrated a textmode driver, but additionally presses F6 while starting the installation. > Solution: Don't press F6, if you have integrated the needed driver.
3. The TXTSETUP.OEM content is not correct or refers to files, which are not present or not usable. > Solution: The TXTSETUP.OEM has to be modified resp. the missing files have to be added, before the nLite processing hasto be started from scratch.

Zitat von abanerus im Beitrag #15

---

Thanks I used your AMD drivers for WinXP-32bit

---

Zitat

---

But curious do we need to rename the files from ahcix*.* to amd_sata*.*?

---

No, that will not work at all.