Zitat von Fernando im Beitrag #720

---

This proves:
1. Newer Firmware/BIOS versions do not automaticly give the user better benchmark results and
2. performance is less important than stability and life span of the SSD.

---

Guys did you ever meet AMD SATA controllers with these HW Ids


???

Motherboard in question is http://www.asrock.com/MB/AMD/Fatal1ty%20...p#Specification

Zitat von Fernando im Beitrag #724

---

@mbk1969:
Which AHCI driver are you currently running on your new AMD Chipset system and which AHCI driver do you recommend to use?

---

What are the best current drivers for the Asus Sabertooth X99 mobo? I'm not sure of the model of Intel & ASMedia SATA ports (not USB).

Noticed recently that some of my drives will just "blink" out of existence until I re-boot - no idea why and no specific cause or pattern.

Thanks! :)

==========

I note the Hardware IDs of my Controllers (2 entries for "Standard SATA AHCI Controllers") under IDE ATA/ATAPI controllers as -
VEN_8086&DEV8D62
VEN_8086&DEV8D02

I don't see a reference to the internal ASMedia ports, oddly (and ALL 10 ports are used) - http://www.anandtech.com/show/9453/the-a...bertooth-review

Zitat von DeathStalker im Beitrag #726

---

I don't see a reference to the internal ASMedia ports, oddly (and ALL 10 ports are used)

---

I have the Western Digital Black NVME and want to install Windows 7 RAID0 configuration.. which driver should I use from the ones you have listed in your original post? I am extremely confused. I tried using the intel drivers when loading drivers in Windows 7 install but Windows 7 did not pick up the drivers.

Edit: using Asus Z270F motherboard

So when I come to the install site of Windows where it says "Load Drivers" I just go to the folder which has the RESTe drivers and hypothetically it should work, right?

Thanks fernando

I have the AsRock z77 Extreme 4, with Windows 7 Ultimate x64.
On the SATA 3 Intel Ports are installed 1 SSD Samsung 850 Evo and on the other a HDD Seagate 1 Tb.
Being that my other HDD has Windows XP SP3 x32 and I installed it on the other SATA 3 GB AS-Media Port.
I installed the latest version of the ASMedia 106x SATA3 AHCI Driver.
Then I started to have a Problem because an Icon appears to Remove Hardware and my HDD is listed under "Devices and Printers"
as if it were an External HDD, but not External HDD and Internal because it is installed in the SATA 3.0 ASMedia Port.
Except this Icon never appeared before.
It only appeared for External Removable Devices, like External HDD, Pendriver.
How do I make this Icon disappear from there?
Or how do you do it, so Windows recognizes My HD on this Sata 3.0 ASMedia Port and prevents it from being Removed?
Because the Intel Sata Ports already work perfectly well with Intel RST installed.

I use the Bios Mod for ASRock z77 Extreme4 => Z77EXT4 2.90M UBU

Any solution?|addpics|g71-3-121e.jpg,g71-4-17b1.png,g71-5-2c2f.png|/addpics|

@mandrakerj
Disable Hotplug option in BIOS SATA Controller settings.