I have installed and used v1.4.7.17.
All is working fine. I ignore what are the change.
Here is a link:
http://www.touslesdrivers.com/index.php?v_page=3&v_code=6050

Zitat von 100PIER im Beitrag #347

---

I have installed and used v1.4.7.17.
All is working fine. I ignore what are the change.
Here is a link:
http://www.touslesdrivers.com/index.php?v_page=3&v_code=6050

---

I ignore what is the Disk 0 problem, i use this SSD as a non system storage media.
Here are some screens:



I ignore why Random Read Score is only 137174 instead of about 300 000 expected..

It's not really a problem, Windows 10 is on the 950 Pro (drive C) for me
With the MS driver, drive C is the disk 0, with the Samsung driver is the disk 1
For example in the Task Manager, Performance tab, we can see it
Nothing serious, but I prefer to have the C drive => Disk 0

I understand now your question.
On my PC you can see on the screencopy my System disk is "Disque 3".
This is not problem (for me)
I observed that W10 seems to attribute a different Disk number each time you reconfigure something in the PC system (i.e. add/remove a new SSD for doing a test, or for driver controller modification as you report, etc..), without memorizing what is the original System Disk number. I ignore why W10 does that. If it is working fine it is sufficient for me.

Hi Fernando,
Samsung released new NVMe driver 1.4.7.17 WHQL, please see attachment.

Regards
morpheus67

Hello

I test the latest Samsung drivers, I installed the .exe and I have not nvmeF.sys file (I see they are available in your archives "Drivers")
This file is present for you?

I am running Windows 10

Thanks

EDIT: So I tried installing the Samsung drivers by the device manager (.inf), and I do not have a USB detection problems (not the nvmeF.sys file in the folder where is located the files drivers)
I will other tested on a fresh install (and integrating drivers) to be sure not to have problems

Ok, this is maybe this nvmeF.sys file that cause problems with USB key

Zitat von Fernando im Beitrag #359

---

Update of the start post

Changelog:

• Marvell 91xx/92xx SATA3 AHCI/RAID drivers:
  • new: 32/64bit Marvell 91xx/92xx SATA3 AHCI/RAID Drivers v1.2.0.1048 WHQL (shown as being v1.2.0.1248), dated 10/20/2015
  • new: 32/64bit Marvell 91xx/92xx SATA3 AHCI/RAID Drivers v1.2.0.1048 WHQL for Win7-8 (x86/x64) dated 09/07/2015

Thanks to Station-Drivers for the source package.
What I do not yet know is, whether
a) these drivers do support TRIM and
b) the drivers dated 09/07/2015 do support Windows XP and/or Vista (x86/x64).

Any feedback is much appreciated!

Good luck with these Marvell AHCI/RAID drivers!
Dieter (alias Fernando)

---

the "old" (and maybe faster) >64bit AMD AHCI Driver v1.2.1.359 WHQL for Win7 x64< does not boot my windows 7. it's stuck at windows starting screen. the "new" one does booting completely. so i have to choose between standard windows ahci driver or the "new" one. i did a benchmark with my sshd. yeah, i know, it's difficult to benchmark a sshd because of judgement of often used files layed on the flash area of the sshd. but the results are quite equal. some values were faster, the other slower...all tests are running on SATA II

AMD "new":



standard windows ahci driver:



EDIT: here are some pics of another benchmark

standard:



amd "new":