@Fernando
Thanks for your reply. I have already tried that, with no success.
Some third party tools can report values correctly, some can't.

I expressed myself wrongly. The drive IS detected, but reported values are not accurate at all:



AIDA64 does the job, however:



With Phison driver, these tools all work, but the drive is treated like removable hardware.

It's not a big issue anyway, I was just wondering. Maybe Samsung needs to release an official driver designed for the 980 Pro.

By the way, here are the performances, just in case somebody wants to know:



Best regards

I could install the drivers, however it did not solve the CrystalDiskInfo issue.
My old 950 Pro, on the other hand, is perfectly supported both by the modded and original drivers on the same platform.

@Fernando

One of my friends recently bought the ASRock A320M-HDV R4.0 in order to pair it with the AMD Athlon 3000G APU. Interestingly, the motherboard features a SATA controller that is not listed by any of the driver packages mentioned in this thread. The hardware IDs are as follows:

PCI\VEN_1022&DEV_43B8&SUBSYS_10621B21&REV_02
PCI\VEN_1022&DEV_43B8&SUBSYS_10621B21
PCI\VEN_1022&DEV_43B8&CC_010601
PCI\VEN_1022&DEV_43B8&CC_0106
 
 

Any idea to locate the actual driver package for the DEV_43B8 controller? The mobo does contain another controller, which is nothing but the familiar DEV_7901 one.

@Fernando

Interesting! But that doesn't answer why the device is listed under IDE ATA/ATAPI controllers instead of Universal Serial Bus controllers.

Not meant to correct Fernando...
Indeed u posted 43B8 so if ur seeing him under USB its the 43BB
42B8 ACHI (No driver from AMD, standard MS driver)
42BB USB3

Hello Fernando. I came across this page and another one of your pages after searching for ways on getting the NVMe drivers for Windows 7 so I can install it to my Surface Pro 7.

I'm not as technically advanced as some of you in the forum but I'm wondering if this forum would be able to assist with my efforts?

So far I've attempted to create a bootable USB with Windows 7 install, which worked on a 4/5 year old laptop but not on the Surface Pro 7. When running the setup through Windows it gets as far as the first few pages of the install process before failing at recognising the USB and presents an error message referring to NVMe drivers.
I've also attempted to install Windows 7 onto a USB flash drive with WintoUSB, but I'm not sure if it works as my second laptop already has dual boot Windows 7 & 10 and I'm unsure if it's booting from the already installed partition on the HDD (I believe this is the case because the internal HDD fan fires up compared to when attempting to boot from the USB where there is no internal fan noise).

Any help would be greatly appreciated.

Thanks in advance.

Is there a driver for Dev_43eb for win7?

I think this is not compatible for window 7.

Hello Sir Fernando,

Mobo: ASUS ROG Strix B550-A
CPU: 5600X
Samsung SSD SATA
Seagate 1TB HDD SATA
Windows 7 professional

under the hardware ID of Standard AHCI 1.0 Serial ATA Controller DEV_43EB is shown. I've tried the different SATA drivers from page 1 to update Standard AHCI 1.0 Serial ATA Controller, to no avail. Any help would be vey much appreciated