It may, it may not, i have a hypothesis on the matter (in which the gigabyte boards should not have been pushed the driver)

It appears that AMD has transitioned the RCBottom driver to using the WDF Directed Power framework, but did not declare the capabiltiy as enabled within the device Inf, so the attached device was untransitioned and unmountable as a result.

SO, take this post with heavy reading!

Enmotus has released a new Driver for its NVMe SSD, with that however, it has brought MASSIVE confusion that I had hoped when I reported it over a month ago, it would be resolved. IT HAS NOT

Prior version displayed in INF, Microsoft Update, Manual Download, Enmotus Website and Enmotus own software: v20.22.1.752
HURRAY from new users to experts, its all unified and no-one can get confused!

New version in INF, Microsoft Update: v4.39.25.992
New version on Enmotus Website and Software: v2.1.1.137

BOOOOOOO confusion all around and LAME
(this is version info, if you add the release date information it DOUBLES the WTF!)

New version release date in INF/MicrosoftUpdate: 2021-02-26
New version release date on Enmotus Website and software: 2021-03-24
(come on FFS Enmotus)


Main Links and Direct Links from each source:
https://www.enmotus.com/fuzedrivessd-manual-driver-install
https://www.enmotus.com/hubfs/Software%2...r-2.1.1.137.zip
https://www.catalog.update.microsoft.com....aspx?q=enmotus
http://download.windowsupdate.com/d/msdo...fecbeacaa95.cab

@Fernando
I think you may have misunderstood what I was saying, they literally have a line in the Enmotus software which says DRIVER VERSION which lists the 2.x version and not 4.x, thus the confusion for people, its dumb.

Zitat von Net7 im Beitrag #2089

---

@Fernando
I think you may have misunderstood what I was saying, they literally have a line in the Enmotus software which says DRIVER VERSION which lists the 2.x version and not 4.x, thus the confusion for people, its dumb.

---

It very much matters, I have already answered a question from someone I convinced to buy into one on the kickstarter, the question?
"Why does the software have an older version listed?"
See picture, driver version displayed by their own software is v2.x, driver version displayed by Windows is 4.x, thus, confusion.

Sure, all I had to tell them was that YES v2.x is ACTUALLY v4.x or v4.x is ACTUALLY v2.x, or basically, they are already running the latest version, just ignore the stupid software.

AMD SATA RAID Drivers (Drivers Only) :
Drivers : 9.3.1.22 WHQL [22/02/2021]

Just curious if Western Digital has a NVME driver for its Blue NVME M2 SSD.I see in device manager there is a Standard NVM Express Controller there.
Or is there another one available that might perform better....

No, this model doesnt use specific NVMe driver.

Crucial / Micron NVMe 2.1.18.0 (>2.1.17.0)

Did you ever notice huge differences in idle temperature, using different NVME-drivers?

I do.

Testing: WD SN730 512GB, running @ 2/4 Lanes

I've tested 4 drivers:

1. Microsoft Generic
2. Samsung Mod.
3. WD WQL
4. Phison

Here are the results of the Benchmark, using ChrystalDiskMark:

Micosoft Generic: 1.712.93 / 1.333.97
Samsung: 1.714.90 / 1.238.99
WD: 1.694.45 / 1.582.50
Phision: 1.769.90 / 1.554.51
(Read/Wirte MB/s)

Microsoft Generic was running at coolest idle, @ 39°C
Phision was running at highest idle: @ 51°C
WD only 1°C lower, @ 50°C
Samsung, about 47°C

So the performance with Phision/WD is the best, but idle temps are noticeable higher than the generic. Another disatvantige of Phison, is that it creates a removable device in taskbar. So for me, I renounce of some MB/s of performance, for significant lower idle temprature.

hello Fernando , im woundering if you can help me with one modified windows 7 embedded version , actualy im tryng to install this windows in one laptop dell e5470 to one nvme ssd hynix bc501 , but actualy i think there dosent have nvme and usb 3.0 support , i have tryed some ways but without success , if i browse and i add driver of usb 3.0 i can go next , i can add also drivers and etc , but it seems there shold be also that hotfix of suporting nvme ? here im stuck
i have success installed windows 7 all version modified by Generation2 this it seems have all drivers on it because is working normaly
can you extract this pack of drivers and inject them to this windows 7 embedded ? or anyone can help me out with this ? i can pay for this help , for iso that will work win7 embedded
king regards