driver removed due to stuttering and crash problems as well as a difficulty in shutting down the system

Hi,
im searching for intel Z390 sata driver for XP, i used driver from this site for Z370 in the past and it worked fine.

I tried to download last package, from this thread - im not 100% sure that it was right one for XP, im a bit confused by description.. and when i tried to point device manager to it.. i got message that it doesnt include driver for my devices..
Device id is:
PCI\VEN_8086&DEV_A352&SUBSYS_B0051458&REV_10

I checked that in inf file are drivers for A352 device.. but im not sure how that SUB moders are working.. and i dunno if you simply need add some new magical number to inf file, or its needs more work to support new device.

I got some problems with OFA nvme driver with my adata sx8200 pro 1tb. Win10 just hangs at boot time. The only solution i found is to remove ssd and uninstall driver manually ( with "Show hidden devices" option in device manager ). Lucky that Windows is installed on another device. The reason why I tried this driver is because the device is not recognized by adata toolbox. Can some one help me with it please? Primary target is recognition by adata toolbox.

Zitat von Toshkarik im Beitrag #1804

---

I got some problems with OFA nvme driver with my adata sx8200 pro 1tb. Win10 just hangs at boot time. The only solution i found is to remove ssd and uninstall driver manually ( with "Show hidden devices" option in device manager ). Lucky that Windows is installed on another device. The reason why I tried this driver is because the device is not recognized by adata toolbox. Can some one help me with it please? Primary target is recognition by adata toolbox.

---

Zitat von MDM im Beitrag #1805

---

And just a couple of pages back...
And Fernando already states what to disable if issues, like Secure boot etc., just read!

---

My is basically the same one with heath spreader, so yes try it. For me the tool works with them, and no lock up, also great performance...
And be sure to change the correct driver (NOT under Disks)!

@Fernando":
Thanks! I've been here for several years but in read-only mode :)
Do you mean generic ms nvme driver ( not ahci )? Because device is nvme ssd. Reason i wrote about toolbox is because it not recognize device with default ( generic ) windows nvme driver. But it did it with samsung driver, i just dont understand why adata is so irresponsible. Or it is MS? May be both?

@MDM:
Thanks! Seems like works fine. I even got some speed boost in CrystalDiskMark 7.0h.

EDIT by Fernando: Fully quoted posts replaced by directly addressing to their authors (to save space)

About "Lite-On NVMe Drivers (for Plextor SSDs)" form first post
I have SSD PLEXTOR PX-512M8PeGN with HardwareIDs VEN_14A4&DEV_22F1
I installed this driver and... TRIM on this PX-512M8PeGN & another PLEXTOR PX-512M9PeY (with standart NVMe driver) - stop works!
Back to standart Windows 10 NVMe driver (stornvme.sys) and TRIM start work!

Zitat von Toshkarik im Beitrag #1804

---

I got some problems with OFA nvme driver with my adata sx8200 pro 1tb. Win10 just hangs at boot time. The only solution i found is to remove ssd and uninstall driver manually ( with "Show hidden devices" option in device manager ). Lucky that Windows is installed on another device. The reason why I tried this driver is because the device is not recognized by adata toolbox. Can some one help me with it please? Primary target is recognition by adata toolbox.

---

1. This drive benchmarked at 2000MB/s SeqRead & 1200MB/s SeqWrite when empty. Is this much performance loss considered normal for these types of drives when 70% full?
2. If I benchmark the drive after a large transfer(drive mirroring/large games) it's performance drops as low as 900MB/s SeqRead & 300MB/s SeqWrite. If I then let the drive sit there for a few minutes, the speeds will eventually come back to normal. Is this behavior normal? My first thought was the drive getting hot during the long transfer & speed coming back as it cools off, but the drive never goes over 40C & usually sits around 32-37 while transferring...

Sorry about the amazon link! I was just trying to show what drive I had without knowing the model number.

The images showed up much bigger in the preview, & I didn't want to be annoying. :P