omg thank you so much Fernando !! your the best ! i will try this today ! Danke

@Fernando:
humm doesnt seems to be working .
i can see the 1T sata drive but not the NVME disk 128gb at the win7 installation screen

ok ! thank you fernando ! will try to integrate ms nvme hotfix's and re-try have a good day !

Good day,Community what drivers do I have to install for this M.2 SSD Samsung PM981a 1TB Nvme?


MZVLB1T0HBLR-00000-07

Very good support here, respect

Zitat von Vartolu im Beitrag #1776

---

Very good support here, respect

---

I have read almost the whole topic but unfortunately have not found an answer if you could help me. best regards

Hi Fernando

Thx again for a great site and drivers etc.

I tried your mod+signed generic 64bit Samsung NVMe driver v3.3.0.2003 for Win10 x64 on a Corsair MP600.
The MP600 uses the same Phison PS5016-E16 controller as your Sabrent Rocket 4.0.

The signing goes fine but installing the driver gives: "The folder you specified does not contain a compatible driver."

So where do I find the DEV info and how do I change it to match my own Hardware ID plz?

Zitat von Vartolu im Beitrag #1778

---

I have read almost the whole topic but unfortunately have not found an answer if you could help me. best regards

---

@MDM:
Ok the modified ones or the normal ones?

@Vartolu:

Zitat von Vartolu im Beitrag #1781

---

Ok the modified ones or the normal ones?

---

Hi @Fernando , Long time lurker first time posting here.

I'm using Adata SX8200Pro 512GB nvme on Windows 10 64bit, about 2 years ago I update the driver to 64bit OFA NVMe Driver v1.5.0.0 for Win10 x64 mod+signed by Fernando. The device now listed as NVMe ADATA SX8200PNP SCSI Disk Device and the drive appear in taskbar as removable. From then I was unable to change the driver anymore, even when using "Have Disk" option and choose the same OFA NVMe Driver v1.5.0.0. It always come out with the message "The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems". What I do when try to install is I'll "Run as Administrator" for Import Win-RAID CA.cmd first then use "Have Disk" to install the driver.

Is there a way for me to remove the current driver and install other driver? The generic 64bit Samsung NVMe driver v3.3.0.2003 can work with my SSD?

Is it because my driver now being identified as SCSI device?

Zitat von Dandy im Beitrag #1783

---

Hi @Fernando , Long time lurker first time posting here.
NVMe ADATA SX8200PNP SCSI Disk Device and the drive appear in taskbar as removable. From then I was unable to change the driver anymore

---

Zitat von Fernando im Beitrag #1738

---

You cannot update or change the driver for any device, which is listed within the "Disks" section of the Device Manager. Only the in-box MS drivers are usable for the Disk Management.
If you want to manually install any other NVMe driver, you have to expand the "Storage Controllers" section of the Device Manager, to do a right-click onto the listed "Standard NVM Express Controller" and to choose the "Update Driver Software" option.

---