or that is also with all microcode update?

Zitat von Lost_N_BIOS im Beitrag #54

---

Then that BIOS is not for your board @barnito - Please link your exact board and revision, then I will make NVME BIOS for you, or link you to one already posted here. Board revision is printed on the bottom left corner too.

@kramotax - no, you need mod for D3P board then, sorry for my confusion previously (too many posts in this thread for various boards and revisions! )
Here is NVME Mod BIOS for 970A-D3P Rev. 2.x BIOS FD (I checked your BIOS on page 3, looks fine to me, but here is another just in case some issue with your edit I missed?)
To answer your question about windows boot manager and normal HDD/SSD with BIOS showing HDD UEFI or Windows boot manager etc - NVME and HDD/SSD will not look the same, you can see HDD/SSD name usually, NVME you will not, you will see PATA or Windows boot manager etc, but never the drive name


* New link (above file extension = .rom, see below) -
Fixed Extension to .FD, in case Qflash does not accept .rom on this model, and anyone uses above file in future with extension view disabled so can't see the .rom extension
Leaving above link for mirror in case one of these goes down

---

The "pal" ur referring is not active since January, is this the correct model GA-970A-DS3P FX (rev. 2.1) ?

EDIT: GA-970A-DS3P-FX r2.1 F.1 NVMe mod, rename it to .F1 and use Q-Flash.

EDIT: Ur country restrictions, use Tor browser or VPN

Zitat von MeatWar im Beitrag #93

---

The "pal" ur referring is not active since January, is this the correct model

---

Zitat von MeatWar im Beitrag #93

---

rename it to .F1 and use Q-Flash.

---

Zitat von MeatWar im Beitrag #93

---

EDIT: Ur country restrictions, use Tor browser or VPN

---

Ohhhhh and now wot? Always the same...go read and learn, that is what u should done before ur request.

[HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS

Zitat von MeatWar im Beitrag #97

---

Ohhhhh and now wot? Always the same...go read and learn, thats is what u sould done before ur request.

[HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS

---

@Lost_N_BIOS

Zitat von Lost_N_BIOS im Beitrag #49

---

@barnito - there is no NVME Options in BIOS, once you are using NVME BIOS you must follow all steps in the "This is what you should do" section at step #4 here exactly as written



@kramotax - @cr3a7er - @KingTVB - By request, here is 970A-DS3P Rev 2.x with updated ucodes and NVME (Contains uCode update BIOS only & uCode+NVME mod)


*********file_id=79810777018052215441

---

@Marcio Basilio ITS UP

GA-970A-DS3P_2.x_fd MOD
Q-Flash ONLY, NOT Windows environment. Ensure that ur using already the FD version, before flashing this mod.

EDIT: Its not just NVMe, all the rest is also updated.

@MeatWar

Thanks, but I was able to download this in the first post. I meant that the link from post #49 is not available. I need it with the latest modification of modules and microcodes, not just NVME

Cancel! I have updated all modules and microcodes in stock 70ADS3P2.FD with UBU_v1.79.17.
I stitched it successfully, the flight is stable!

Ok ok u got it... didnt understand why did u wanted the files from Lost anyway... seems that in fact u didnt needed any files at all.

@MeatWar
At first I was afraid to spoil the BIOS, so I asked. Everything turned out to be much easier, I ventured to collect and check personally.
However, it is scary to experiment without soldering equipment.

the file is no longer available