Hey guys, I have a GA-970A-DS3P rev1. 0 who will help update in BIOS F1 microcode??

@nikitared - Here, latest BIOS, NVME Mod + all microcodes updated. I don't think it would be good idea to use new microcodes with old Agesa in F1 BIOS
If you want F1 anyway, let me know, I will redo on F1 instead. Flash via Qflash - 970A-DS3P_F2j-NVME-uCodeUPD

Here, in case you want, save some time. Hopefully it will work OK (new uCodes w/ old Agesa)
970A-DS3P_F1-NVME-uCodeUPD

Hi,

I have GA-970A-UD3P rev 2 model. I have trying. Install OK, but 4 usb controller not reconize my hard drives and i not see my nvme drive.
(UEFI actived + GPT partition table + efi partition)

Regards

@djynn - what BIOS (what post here) did you install?
You need to do a clean operating system install, follow all steps exactly as mentioned in step #4 of the "This is what you should do" section of this guide - [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS
Be sure you follow exactly, especially remove all other HDD/SDD drives and USB drives

Thank's.

I have "recompiled" my uefi bios. I can boot on nvme now.

Hi. Any way to get a mod of version FC for GA-970A-DS3P (rev. 2.x)? FD unfortunately doesn't work with my cpu.

@pixxiestix - Here you go, flash via QFlash, checksum should be F900 - 970A-DS3P (rev. 2.x) BIOS FC NVME Mod >> http://s000.tinyupload.com/index.php?fil...426312504335665
FD should work with your CPU too, same as FC. Or do you mean it just doesn't overclock as nicely, or with similar settings (may not always work with same exact settings between BIOS versions)

@Lost_N_BIOS I'm running a FX 9590 which seems to work on the FC firmware, but when I update to FD my cpu is no longer supported and won't start up at all, so I had to reflash to FC.

@pixxiestix - very weird, you should let Gigabyte know about that in email, in case they didn't notice, it should not be that way

Mine is rev 2.1. Tried to mod myself and if i turn the pc with the nvme/pcie connected the system freeze on the bios screen...

good afternoon, i need your help: I have a GA-970A-DS3P FX motherboard, bios FD version, AMD Radeon R5 NVMe Series [R5MP240G8]. You would write a new bios to support this disk for a PCIE slot with the ability to boot WINDOWS. Thank you in advance.

Hello everyone! I found this forum here because I wasnt able to boot Windows with my Samsung 970 Evo Plus (500GB). I'm completly new to bios modding, but I want to try this out to get the NVMe to work in the way I wanted it to. My question is: which Bios version shouldt I use for my GA-970A-DS3P FX motherboard in order to boot windows from the SSD in the PCIe Adapter and which steps do I have to follow afterwards? Thank you !

Anakartım Gigabyte GA-970A-DS3P rev 2.1 nvme m için hangi bios yazılımını kullanmalıyım. Şimdiden teşekkürler.

Hi. Which link to use to download the modified bios for ga970-ds3p motherboard version 1.0 with updated microcodes? Some links have expired so I'm not sure which one to apply to my 1.0 version?

Hero u go GA-970A-DS3P R1.0 F2j mcodes only