Hi

Im after a Toshiba XG4 THNSN5256GPUK NVME SSD Driver for Windows 7 which comes in our Corp. HP Elitebook 840 G4 -s

I managed to boil down my final steps I need to do to succesfully install Windows 7 Enterprise via ISO or MDT Deployment to the below:
Bake the KB2990941, KB3087873, the NVMe driver for Toshiba XG4 256GB M.2 NVMe SSD PCIe THNSN5256GPUK and integrate them
via DISM into my install.wim/boot.wim

My Problem is that no matter which driver I try for this XG4 It is not recognized * when i am on load driver screen neither trying to install Windows 7 *
I tried the Pure 64bit OCZ Driver and some toshiba drivers too including the XG3 but none of them work
Someone mentioned there might be a Win 10 driver native I could use for this?

I prefer anything which makes it work so I can deploy Windows 7 on this HP Elitebook 840 G4 + NVME Toshiba XG4 256GB M.2 NVMe SSD PCIe THNSN5256GPUK

Thanks a lot
Regards
Viktor

EDIT by Fernando: Thread title customized, because the authors were using different Operating Systems

Hi Fernando

Yes in theory I baked that KB and another one into my boot.wim install.wim files but just to make sure i will go through those steps one more time lets see i might have made an error or something

I bake these two KB's again in my clean Install.wim and boot.wim but Im afraid the NVME Driver for this XG4 Toshiba still might be needed

Thanks a lot

Regards

Viktor

Hello,

I have the same problem with an HP ProBook 650 G3.
HP does not provide support :-(
All drivers and patches do not work.

greetings
Tom

THN5N5256GPUK XG4 NVMe

here are the sys and inf of stornvme the standard windows 10 driver.
I hope it works.

it did not.

I found this hotfix for windows 7 and server 2008:


https://support.microsoft.com/en-us/help...-server-2008-r2

EDIT by Fernando: Inserted picture resized (can be enlarged by clicking onto it)

I have the same problem with a Elitebook 820 G4,
I can't find the driver to load in windows 7 installation when is requested and I have 23 laptops to downgrade to windows 7. Any ideas???
Pleaseeeeeeeeeeee........

This is the SSD
What can i do to install Windows 7 ???

Hi Dieter,

I can't help with the specific driver, but I can report my experience with an HP Probook 450 G3 using a Sandisk SSD (SATA):

the used SSD is not the same as the commercial one, even if the name the same ist, x400.
The SSD I bought to do some tests (I didn'want to touch the original) had not the same build like the one used by HP and Sandisk-Support told me, the built-in is a special OEM-model made for HP.

So may be the other user's laptops use a special OEM-model too and needs a special driver from HP.

=== START OF INFORMATION SECTION ===
Vendor: NVMe
Product: THNSN5256GPUK TO
Revision: 4101
Compliance: SPC-4
User Capacity: 256,060,514,304 bytes [256 GB]
Logical block size: 512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate: Solid State Device
Logical Unit id: eui.00080D02001C587D
Serial number: 0008_0D02_001C_587D.
Device type: disk
Local Time is: Tue Jul 04 21:29:29 2017 PDT
SMART support is: Unavailable - device lacks SMART capability.

VEN_1179 DEV_0115