@Extranick:
Welcome at Win-RAID Forum!

Due to the chipset (is it Intel Baytrail?) your mainboard has only a very limited SATA (only SATA2) and AHCI support.
Nevertheless it should be no problem to get Windows XP proper installed while running the SATA ports in IDE mode.
If you are currently running any Windows OS in AHCI mode on the machine, please have a look into the "IDE ATA/ATAPI Controllers" section of the Device Manager, do a right-click onto the listed AHCI Controller and choose the options "Properties" > "Details" > "Property" > "HardwareIDs".
Please post them and I will try to help you.

Regards
Dieter (alias Fernando)

@Extranick:
Thanks for checking and posting the HardwareIDs.
According to the HardwareIDs, which are within the iaAHCI.inf of my mod+signed 32bit Intel RST driver v11.2.0.1006, it should support the Intel SATA Controller of your mainboard while running in AHCI mode, but unfortunately this does not automaticly mean, that the Intel driver will be accepted by the XP Setup.
As I have already written within my first reply, the "Baytrail" chipset of your mainboard doesn't offer full AHCI support. That is the reason why the chipset manufacturer Intel itself doesn't provide any Intel RST driver for your maiboard's chipset.
Consequences:
You can integrate the "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod+signed by Fernando" and try to get XP installed this way in AHCI mode.
If it should fail, the only option to get XP properly installed onto your Baytrail system is to set the Intel SATA Controller within the BIOS to "IDE" before you start the XP installation.

Zitat von Extranick im Beitrag #6

---

All installations XP (AHCI, IDE mode) ended in BSOD. In IDE mode, the driver for DEV_0F21 is missing .. I think.

---

@Extranick:
As I have already previously stated, you should be able to get XP installed and working while using your current system with limited SATA support.
Pre-conditions:
1. The on-board Intel SATA Controller has to be set to "IDE" mode.
2. You have to start the installation by booting off a "clean" (untouched) original XP CD with integrated SP3.
3. When prompted to press F6, you have to press F7 or F5 and to hoose the matching ACPI option.

Zitat von Extranick im Beitrag #12

---

a) multiprocesor ACPI .... immediately end ... missing files

---

Zitat

---

I think ..... installation process XP does not know that they should assign DEV_0F21 to the standard IDE controller.

---

No, the XP Setup should be able to detect and to manage all SATA IDE Controllers.

Zitat

---

Perhaps it would like to modify an INF.

---

Which INF file should be modded?

Zitat von Extranick im Beitrag #14

---

Would you modify your v.11.2.0.1006 drivers by adding it to DEV_0F21 using the standard IDE driver and then using it via F6?

---