Forum - ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H)

Win-Raid Forum (Drivers - Firmware - Modding) � Special Topics � Intel Management Engine � ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H)

Page 1 of 2 � Page 1 2 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Mon Apr 10, 2017 4:47 pm (Last edited: Mon Apr 10, 2017 5:39 pm)

I own a Lenovo Ideapad Y700 15isk. The bios is secured and, apparently, unsigned (modded) bioses cannot be flashed; only a SPI programmer is possible. I am trying to circumvent this as I have no access to this tool where I live - Ghana. I have dug around a bit and discovered certain interesting things I want to share with you so that you could offer me your opinion concerning possibilities/options.

My current ME Info Summary is as follows:

Intel ME FW Version: 11.0.0.1202 H
Intel ME Recovery Image Version: 11.0.0.1202
Intel ME FITC Version: 11.0.0.1202

My ultimate goal is to unlock the advanced menu and other hidden features in the ME and then reflash through normal method.

Lenovo has released a good number of bioses, but with an older version 3.5, which was quickly pulled, they also included an upgrade of the ME FW to 11.0.0.1202. I don't know if it is as a result of this upgrade, but the flashing of this particular 3.5 bios was unusual. I flashed the bios in Windows 10 x64 Pro. The system rebooted 5 times as part of the bios upgrade and process. The phases are as follows:

Phase 1: UAC disabling (registry edit and reboot)
Phase 2: ME "Unlock" (reboot)
Phase 3: Bios FW loading (reboot and flashing)
Phase 4: UAC enabling (registry edit and reboot)
Phase 5: Confirmation of success

During the second cycle, I noticed an eye-popping "ME Unlock" in the sequence of lines displayed in the CMD window. So I unpacked the package and found a number of files with two batch files; "setup.bat," and "process.bat" among them. The setup.bat initiates the process, as follows:

echo Step 1: tun off UAC
echo y | reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /v EnableLUA /t REG_DWORD /d 0 /f>nul
if %errorlevel%==1 set ERRORMSG=Could not disable UAC && goto ERROR
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" /v "EnableXamlStartMenu" /t REG_DWORD /d "0" /f

@copy /y %Temp%\ThreeFlash\Process.bat %Userprofile%\AppData\Roaming\Microsoft\Windows\"Start Menu"\Programs\Startup\Process.bat > nul

Shutdown.exe -r
goto end

On the next boot, process.bat kicks into action with the following line:

echo Step 2: Unlock ME before flash BIOS and EC!
cd %Temp%\ThreeFlash
WinTest.exe C45 D80
WinTest.exe C40 D02

A little something on this;

WinTest.exe C45 D80 unlocks the ME. Even though it says unlock, it seems more like shutdown, I suppose in preparation for the upgrade because after this command is issued the ME is unresponsive to any commands. MEInfo, MEManuf, and FWUpdLcl64 all don't work. I lose audio after the reboot.

WinTest.exe C40 D02 reboots the system.

After observing this, I replicated the UAC off, reboot, ME unlock, reboot, and dumped my entire bios with the flashing app, H2OFFT-Wx64 using the 'BackupROM' flag. I then reversed the process, as detailed in the batch files.

Audio was restored again with a WinTest.exe C45 D81 command, and a system reboot.

My question is, with the "unlocked" ME dumped bios, is it possible that the ME could be in a vulnerable state where its settings could be changed? Since it's totally unresponsive in a live system, could it be extracted and settings edited to unlock it permanently, injected back and possibly flashed back while the system is rendered receptive again - ie. UAC off, ME unlocked? Is this worth a shot? It appears the ME unlock procedure is only necessary for the upgrade of the ME firmware and so has nothing to do with the secure-flash protection mechanisms of the rest of bios, but I want to believe that the ME itself can offer a backdoor into the castle.

Please advice. I have all the files and would be glad if the geniuses in the community could look into this.

PS: I did manage to upgrade my ME FW to version 11.6, but FITC version still remained 11.0. I've since reverted back with a fresh bios update. While on 11.6, I got some errors (yellow text) in MEManuf. Also, I couldn't downgrade or revert to 11.0 using FWUpdLcl64. Only a bios reflash did the trick.

Thank you.

Here is a MEInfo report of my system:

Intel(R) MEInfo Version: 11.0.15.1003
Copyright(C) 2005 - 2016, Intel Corporation. All rights reserved.

FW Status Register1: 0x90000245
FW Status Register2: 0x06F60506
FW Status Register3: 0x00000200
FW Status Register4: 0x00084000
FW Status Register5: 0x00000000
FW Status Register6: 0x40000000

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: CM0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
SPI Flash Log: Not Present
Phase: ROM/Preboot
ICC: Valid OEM data, ICC programmed
ME File System Corrupted: No
PhaseStatus: AFTER_SRAM_INIT

FPF and ME Config Status: Match
FW Capabilities value is 0x31111940
Feature enablement is 0x31111940
Platform type is 0x11220321
Found an Intel vPro Wireless device
Intel(R) ME code versions:

Windows OS Version : 6.2.9200 ""
Table Type 0 ( 0x 00 ) found, size of 24 (0x 18 ) bytes
BIOS Version CDCN35WW

Windows OS Version : 6.2.9200 ""
Table Type 0 ( 0x 00 ) found, size of 24 (0x 18 ) bytes
Table Type 1 ( 0x 01 ) found, size of 27 (0x 1B ) bytes
Table Type 2 ( 0x 02 ) found, size of 15 (0x 0F ) bytes
Table Type 3 ( 0x 03 ) found, size of 22 (0x 16 ) bytes
Table Type 4 ( 0x 04 ) found, size of 42 (0x 2A ) bytes
Table Type 7 ( 0x 07 ) found, size of 19 (0x 13 ) bytes
Table Type 7 ( 0x 07 ) found, size of 19 (0x 13 ) bytes
Table Type 7 ( 0x 07 ) found, size of 19 (0x 13 ) bytes
Table Type 7 ( 0x 07 ) found, size of 19 (0x 13 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 8 ( 0x 08 ) found, size of 9 (0x 09 ) bytes
Table Type 9 ( 0x 09 ) found, size of 17 (0x 11 ) bytes
Table Type 9 ( 0x 09 ) found, size of 17 (0x 11 ) bytes
Table Type 9 ( 0x 09 ) found, size of 17 (0x 11 ) bytes
Table Type 9 ( 0x 09 ) found, size of 17 (0x 11 ) bytes
Table Type 9 ( 0x 09 ) found, size of 17 (0x 11 ) bytes
Table Type 13 ( 0x 0D ) found, size of 22 (0x 16 ) bytes
Table Type 14 ( 0x 0E ) found, size of 17 (0x 11 ) bytes
Table Type 14 ( 0x 0E ) found, size of 8 (0x 08 ) bytes
Table Type 14 ( 0x 0E ) found, size of 8 (0x 08 ) bytes
Table Type 15 ( 0x 0F ) found, size of 29 (0x 1D ) bytes
Table Type 16 ( 0x 10 ) found, size of 23 (0x 17 ) bytes
Table Type 17 ( 0x 11 ) found, size of 40 (0x 28 ) bytes
Table Type 17 ( 0x 11 ) found, size of 40 (0x 28 ) bytes
Table Type 17 ( 0x 11 ) found, size of 40 (0x 28 ) bytes
Table Type 17 ( 0x 11 ) found, size of 40 (0x 28 ) bytes
Table Type 19 ( 0x 13 ) found, size of 31 (0x 1F ) bytes
Table Type 20 ( 0x 14 ) found, size of 35 (0x 23 ) bytes
Table Type 20 ( 0x 14 ) found, size of 35 (0x 23 ) bytes
Table Type 21 ( 0x 15 ) found, size of 7 (0x 07 ) bytes
Table Type 24 ( 0x 18 ) found, size of 5 (0x 05 ) bytes
Table Type 133 ( 0x 85 ) found, size of 5 (0x 05 ) bytes
Table Type 200 ( 0x C8 ) found, size of 16 (0x 10 ) bytes
Table Type 219 ( 0x DB ) found, size of 81 (0x 51 ) bytes
Table Type 221 ( 0x DD ) found, size of 26 (0x 1A ) bytes
Table Type 221 ( 0x DD ) found, size of 26 (0x 1A ) bytes
Table Type 221 ( 0x DD ) found, size of 68 (0x 44 ) bytes
Table Type 221 ( 0x DD ) found, size of 54 (0x 36 ) bytes
Table Type 222 ( 0x DE ) found, size of 14 (0x 0E ) bytes
Table Type 248 ( 0x F8 ) found, size of 18 (0x 12 ) bytes
Table Type 127 ( 0x 7F ) found, size of 4 (0x 04 ) bytes

SM BIOS table entry point structure not found
MEBx Version Not Available
GbE Region does not exist.
GbE Version Unknown
Vendor ID 8086
PCH Version 31
FW Version 11.0.0.1202 H
LMS Version Not Available
MEI Driver Version 11.5.0.1011
Wireless Hardware Version 2.1.77
Wireless Driver Version 19.30.0.4

FW Capabilities 0x31111940

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Service Advertisement & Discovery - NOT PRESENT
Intel(R) NFC Capabilities - NOT PRESENT
Intel(R) Platform Trust Technology - PRESENT/ENABLED

TLS Disabled
Last ME reset reason Firmware reset
Local FWUpdate Enabled
BIOS Config Lock Enabled
GbE Config Lock Enabled
Get flash master region access status...done
Host Read Access to ME Disabled
Host Write Access to ME Disabled
Get EC region access status...done
Host Read Access to EC Enabled
Host Write Access to EC Enabled
Protected Range Register Base #0 0x6C0
Protected Range Register Limit #0 0x7FF
Protected Range Register Base #1 0x29A
Protected Range Register Limit #1 0x57F
Protected Range Register Base #2 0x0
Protected Range Register Limit #2 0x0
Protected Range Register Base #3 0x0
Protected Range Register Limit #3 0x0
Protected Range Register Base #4 0x0
Protected Range Register Limit #4 0x0
SPI Flash ID 1 C84017
SPI Flash ID 2 Unknown
BIOS boot State Post Boot
OEM ID 00000000-0000-0000-0000-000000000000
Capability Licensing Service Enabled
OEM Tag 0x00000000
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
C-link Status Disabled
Independent Firmware Recovery Disabled
EPID Group ID 0xF8D
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "OEM Public Key Hash"
OEM Public Key Hash ME 0000000000000000000000000000000000000000000000000000000000000000
ACM SVN FPF 0x0
KM SVN FPF 0x0
BSMM SVN FPF 0x0
GuC Encryption Key FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "GuC Encryption Key"
GuC Encryption Key ME 0000000000000000000000000000000000000000000000000000000000000000

FPF ME
--- --
Force Boot Guard ACM Disabled
Retrieving Variable "Force Boot Guard ACM Enabled" Disabled
Protect BIOS Environment Disabled
Retrieving Variable "Protect BIOS Environment Enabled" Disabled
CPU Debugging Enabled
Retrieving Variable "CPU Debugging" Enabled
BSP Initialization Enabled
Retrieving Variable "BSP Initialization" Enabled
Measured Boot Disabled
Retrieving Variable "Measured Boot Enabled" Disabled
Verified Boot Disabled
Retrieving Variable "Verified Boot Enabled" Disabled
Key Manifest ID 0x0
Retrieving Variable "Key Manifest ID" 0x0
Enforcement Policy 0x0
Retrieving Variable "Error Enforcement Policy" 0x0
PTT Enabled
Retrieving Variable "Intel(R) PTT Supported" Enabled
PTT Lockout Override Counter 0x0
EK Revoke State Not Revoked
PTT RTC Clear Detection FPF 0x0

I used another tool to dump my current default settings. Here's a snippet:

********** OverClocking Performance Menu **********
(0x2E4, 1, 0x61D25395F30E92B3) OverClocking Feature
Callback ID = 0x3f
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x2E5, 1, 0x61D25395F30E92B3) IMON Scaling Support
Callback ID = 0x40
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0xCEC, 1, 0x61D25395F30E92B3) Vboost Enable
Callback ID = 0x41
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x2FF, 1, 0x61D25395F30E92B3) EDRAM Ratio
Callback ID = 0x42
(0)[*] Auto (Default)
(10)[ ] 10
(11)[ ] 11
(12)[ ] 12
(13)[ ] 13
(14)[ ] 14
(15)[ ] 15
(16)[ ] 16
(17)[ ] 17
(18)[ ] 18
(19)[ ] 19
(20)[ ] 20
(21)[ ] 21
(22)[ ] 22
(23)[ ] 23
(24)[ ] 24
(25)[ ] 25
(26)[ ] 26
(27)[ ] 27
(28)[ ] 28
(29)[ ] 29
(30)[ ] 30

(0x918, 1, 0x61D25395F30E92B3) RSR
Callback ID = 0x43
(0)[ ] Disabled
(1)[*] Enabled (Default)

********** Processor **********
(0x3EC, 2, 0x61D25395F30E92B3) Core Max OC Ratio
Callback ID = 0x49
Minimum: 0
Maximum: 83
Step: 1
Default: 0
Setting: [0]

(0x3EE, 1, 0x61D25395F30E92B3) Core Voltage Mode
Callback ID = 0x4a
(0)[*] Adaptive (Default)
(1)[ ] Override

(0x3F1, 2, 0x61D25395F30E92B3) Core Voltage Override
Callback ID = 0x4b
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x3EF, 2, 0x61D25395F30E92B3) Core Extra Turbo Voltage
Callback ID = 0x4c
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x3F3, 2, 0x61D25395F30E92B3) Core Voltage Offset
Callback ID = 0x4d
Minimum: 0
Maximum: 1000
Step: 1
Default: 0
Setting: [0]

(0x3F5, 1, 0x61D25395F30E92B3) Offset Prefix
Callback ID = 0x4e
(0)[*] + (Default)
(1)[ ] -

(0xF8E, 2, 0x61D25395F30E92B3) Core PLL Voltage Offset
Callback ID = 0x4f
Minimum: 0
Maximum: 63
Step: 1
Default: 0
Setting: [0]

********** GT Slice Domain **********
(0x300, 1, 0x61D25395F30E92B3) GT OverClocking Frequency
Callback ID = 0x50
Minimum: 0
Maximum: 60
Step: 1
Default: 0
Setting: [0]

(0x400, 1, 0x61D25395F30E92B3) GT Voltage Mode
Callback ID = 0x51
(0)[*] Adaptive (Default)
(1)[ ] Override

(0x403, 2, 0x61D25395F30E92B3) GT Voltage Override
Callback ID = 0x52
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x401, 2, 0x61D25395F30E92B3) GT Extra Turbo Voltage
Callback ID = 0x53
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x405, 2, 0x61D25395F30E92B3) GT Voltage Offset
Callback ID = 0x54
Minimum: 0
Maximum: 1000
Step: 1
Default: 0
Setting: [0]

(0x407, 1, 0x61D25395F30E92B3) Offset Prefix
Callback ID = 0x55
(0)[*] + (Default)
(1)[ ] -

********** GT Unslice Domain **********
(0x949, 1, 0x61D25395F30E92B3) GT OverClocking Frequency
Callback ID = 0x56
Minimum: 0
Maximum: 60
Step: 1
Default: 0
Setting: [0]

(0x94A, 1, 0x61D25395F30E92B3) GT Voltage Mode
Callback ID = 0x57
(0)[*] Adaptive (Default)
(1)[ ] Override

(0x94B, 2, 0x61D25395F30E92B3) GT Voltage Override
Callback ID = 0x58
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x94D, 2, 0x61D25395F30E92B3) GT Extra Turbo Voltage
Callback ID = 0x59
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x94F, 2, 0x61D25395F30E92B3) GT Voltage Offset
Callback ID = 0x5a
Minimum: 0
Maximum: 1000
Step: 1
Default: 0
Setting: [0]

(0x951, 1, 0x61D25395F30E92B3) Offset Prefix
Callback ID = 0x5b
(0)[*] + (Default)
(1)[ ] -

********** Ring **********
(0x908, 1, 0x61D25395F30E92B3) Ring Max OC Ratio
Callback ID = 0x5c
Minimum: 0
Maximum: 83
Step: 1
Default: 0
Setting: [0]

(0xC01, 1, 0x61D25395F30E92B3) Ring Min OC Ratio
Callback ID = 0x5d
Minimum: 0
Maximum: 83
Step: 1
Default: 0
Setting: [0]

(0x909, 1, 0x61D25395F30E92B3) Ring Voltage Mode
Callback ID = 0x5e
(0)[*] Adaptive (Default)
(1)[ ] Override

(0x90A, 2, 0x61D25395F30E92B3) Ring Voltage Override
Callback ID = 0x5f
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x90F, 2, 0x61D25395F30E92B3) Ring Extra Turbo Voltage
Callback ID = 0x60
Minimum: 0
Maximum: 2000
Step: 1
Default: 0
Setting: [0]

(0x90C, 2, 0x61D25395F30E92B3) Ring Voltage Offset
Callback ID = 0x61
Minimum: 0
Maximum: 1000
Step: 1
Default: 0
Setting: [0]

(0x90E, 1, 0x61D25395F30E92B3) Offset Prefix
Callback ID = 0x62
(0)[*] + (Default)
(1)[ ] -

********** Uncore **********
(0x408, 2, 0x61D25395F30E92B3) Uncore Voltage Offset
Callback ID = 0x63
Minimum: 0
Maximum: 1000
Step: 1
Default: 0
Setting: [0]

(0x40A, 1, 0x61D25395F30E92B3) Offset Prefix
Callback ID = 0x64
(0)[*] + (Default)
(1)[ ] -

********** Memory Overclocking Menu **********

Memory Profile:
Default Custom XMP1 XMP2

tCK [fs]
0000000 0000000 0000000 0000000

tCL
00000 00000 00000 00000

tRCD/tRP
00000 00000 00000 00000

tRAS
00000 00000 00000 00000

tCWL
00000 00000 00000 00000

tFAW
00000 00000 00000 00000

tREFI
00000 00000 00000 00000

tRFC
00000 00000 00000 00000

tRRD
00000 00000 00000 00000

tRTP
00000 00000 00000 00000

tWR
00000 00000 00000 00000

tWTR
00000 00000 00000 00000

NMode
00000 00000 00000 00000

VDD [mV]
00000 00000 00000 00000

(0x2FB, 1, 0x61D25395F30E92B3) Memory profile
Callback ID = 0x65
(0)[*] Default profile (Default)
(1)[ ] Custom profile
(2)[ ] XMP profile 1
(3)[ ] XMP profile 2

(0x3A3, 1, 0x61D25395F30E92B3) Memory Reference Clock
Callback ID = 0x66
(0)[ ] Auto
(1)[*] 133 (Default)
(2)[ ] 100

(0x40B, 1, 0x61D25395F30E92B3) Memory Ratio
Callback ID = 0x67
(0)[*] Auto (Default)
(4)[ ] 4
(5)[ ] 5
(6)[ ] 6
(7)[ ] 7
(8)[ ] 8
(9)[ ] 9
(10)[ ] 10
(11)[ ] 11
(12)[ ] 12
(13)[ ] 13
(14)[ ] 14
(15)[ ] 15

(0x2ED, 1, 0x61D25395F30E92B3) QCLK Odd Ratio
Callback ID = 0x68
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x2EB, 1, 0x61D25395F30E92B3) tCL
Callback ID = 0x751
Minimum: 0
Maximum: 31
Step: 1
Default: 0
Setting: [0]

(0x2EC, 1, 0x61D25395F30E92B3) tRCD/tRP
Callback ID = 0x752
Minimum: 0
Maximum: 63
Step: 1
Default: 0
Setting: [0]

(0x2EE, 2, 0x61D25395F30E92B3) tRAS
Callback ID = 0x753
Minimum: 0
Maximum: 64
Step: 1
Default: 0
Setting: [0]

(0x2EA, 1, 0x61D25395F30E92B3) tCWL
Callback ID = 0x75a
Minimum: 0
Maximum: 20
Step: 1
Default: 0
Setting: [0]

(0x2F7, 2, 0x61D25395F30E92B3) tFAW
Callback ID = 0x759
Minimum: 0
Maximum: 63
Step: 1
Default: 0
Setting: [0]

(0x2FD, 2, 0x61D25395F30E92B3) tREFI
Callback ID = 0x75b
Minimum: 0
Maximum: 65535
Step: 1
Default: 0
Setting: [0]

(0x2F1, 2, 0x61D25395F30E92B3) tRFC
Callback ID = 0x755
Minimum: 0
Maximum: 1023
Step: 1
Default: 0
Setting: [0]

(0x2F3, 1, 0x61D25395F30E92B3) tRRD
Callback ID = 0x756
Minimum: 0
Maximum: 15
Step: 1
Default: 0
Setting: [0]

(0x2F5, 1, 0x61D25395F30E92B3) tRTP
Callback ID = 0x758
Minimum: 0
Maximum: 15
Step: 1
Default: 0
Setting: [0]

(0x2F0, 1, 0x61D25395F30E92B3) tWR
Callback ID = 0x69
(0)[*] Auto (Default)
(5)[ ] 5
(6)[ ] 6
(7)[ ] 7
(8)[ ] 8
(10)[ ] 10
(12)[ ] 12
(14)[ ] 14
(16)[ ] 16
(18)[ ] 18
(20)[ ] 20
(24)[ ] 24

(0x2F4, 1, 0x61D25395F30E92B3) tWTR
Callback ID = 0x757
Minimum: 0
Maximum: 28
Step: 1
Default: 0
Setting: [0]

(0x1DF, 1, 0x61D25395F30E92B3) NMode
Callback ID = 0x754
Minimum: 0
Maximum: 2
Step: 1
Default: 0
Setting: [0]

(0x2F9, 2, 0x61D25395F30E92B3) Memory Voltage
Callback ID = 0x6a
(0)[*] Default (Default)
(1200)[ ] 1.20 Volts
(1250)[ ] 1.25 Volts
(1300)[ ] 1.30 Volts
(1350)[ ] 1.35 Volts
(1400)[ ] 1.40 Volts
(1450)[ ] 1.45 Volts
(1500)[ ] 1.50 Volts
(1550)[ ] 1.55 Volts
(1600)[ ] 1.60 Volts
(1650)[ ] 1.65 Volts

(0xCF6, 1, 0x61D25395F30E92B3) DllBwEn[0]
Callback ID = 0x6b
Minimum: 0
Maximum: 7
Step: 1
Default: 0
Setting: [0]

(0xCF7, 1, 0x61D25395F30E92B3) DllBwEn[1]
Callback ID = 0x6c
Minimum: 0
Maximum: 7
Step: 1
Default: 1
Setting: [1]

(0xCF8, 1, 0x61D25395F30E92B3) DllBwEn[2]
Callback ID = 0x6d
Minimum: 0
Maximum: 7
Step: 1
Default: 2
Setting: [2]

(0xCF9, 1, 0x61D25395F30E92B3) DllBwEn[3]
Callback ID = 0x6e
Minimum: 0
Maximum: 7
Step: 1
Default: 2
Setting: [2]

VDD
N/A

********** Cpu Thermal Configuration **********
(0x19E, 1, 0x61D25395F30E92B3) DTS SMM
Callback ID = 0x73
(0)[*] Disabled (Default)
(1)[ ] Enabled
(2)[ ] Critical Temp Reporting (Out Of spec)

(0x8EA, 4, 0x61D25395F30E92B3) Tcc Offset Time Window
Callback ID = 0x75
(0)[*] Disabled (Default)
(5)[ ] 5 ms
(10)[ ] 10 ms
(55)[ ] 55 ms
(156)[ ] 156 ms
(375)[ ] 375 ms
(500)[ ] 500 ms
(750)[ ] 750 ms
(1000)[ ] 1 sec
(2000)[ ] 2 sec
(3000)[ ] 3 sec
(4000)[ ] 4 sec
(5000)[ ] 5 sec
(6000)[ ] 6 sec
(7000)[ ] 7 sec
(8000)[ ] 8 sec
(10000)[ ] 10 sec
(12000)[ ] 12 sec
(14000)[ ] 14 sec
(16000)[ ] 16 sec
(20000)[ ] 20 sec
(24000)[ ] 24 sec
(28000)[ ] 28 sec
(32000)[ ] 32 sec
(40000)[ ] 40 sec
(48000)[ ] 48 sec
(56000)[ ] 56 sec
(64000)[ ] 64 sec
(80000)[ ] 80 sec
(96000)[ ] 96 sec
(112000)[ ] 112 sec
(128000)[ ] 128 sec
(160000)[ ] 160 sec
(192000)[ ] 192 sec
(224000)[ ] 224 sec
(256000)[ ] 256 sec
(320000)[ ] 320 sec
(384000)[ ] 384 sec
(448000)[ ] 448 sec

(0x8EE, 1, 0x61D25395F30E92B3) Tcc Offset Clamp Enable
Callback ID = 0x76
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x8EF, 1, 0x61D25395F30E92B3) Tcc Offset Lock Enable
Callback ID = 0x77
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x19F, 1, 0x61D25395F30E92B3) Bi-directional PROCHOT#
Callback ID = 0x78
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x1A0, 1, 0x61D25395F30E92B3) Disable PROCHOT# Output
Callback ID = 0x79
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x8F0, 1, 0x61D25395F30E92B3) Disable VR Thermal Alert
Callback ID = 0x7a
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x8F2, 1, 0x61D25395F30E92B3) PROCHOT Response
Callback ID = 0x7b
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x8F1, 1, 0x61D25395F30E92B3) PROCHOT Lock
Callback ID = 0x7c
(0)[*] Disabled (Default)
(1)[ ] Enabled

********** Platform Thermal Configuration **********
(0x1FA, 1, 0x61D25395F30E92B3) Automatic Thermal Reporting
Callback ID = 0x7e
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x18C, 1, 0x61D25395F30E92B3) Critical Trip Point
Callback ID = 0x7f
(15)[ ] 15 C
(23)[ ] 23 C
(31)[ ] 31 C
(39)[ ] 39 C
(47)[ ] 47 C
(55)[ ] 55 C
(63)[ ] 63 C
(71)[ ] 71 C
(79)[ ] 79 C
(87)[ ] 87 C
(95)[ ] 95 C
(100)[ ] 100 C
(103)[ ] 103 C
(111)[ ] 111 C
(119)[*] 119 C (POR) (Default)
(127)[ ] 127 C

(0x18E, 1, 0x61D25395F30E92B3) Active Trip Point 0
Callback ID = 0x80
(127)[ ] Disabled
(15)[ ] 15 C
(23)[ ] 23 C
(31)[ ] 31 C
(39)[ ] 39 C
(47)[ ] 47 C
(55)[ ] 55 C
(63)[ ] 63 C
(71)[*] 71 C (Default)
(79)[ ] 79 C
(87)[ ] 87 C
(95)[ ] 95 C
(103)[ ] 103 C
(111)[ ] 111 C
(119)[ ] 119 C (POR)

(0x18D, 1, 0x61D25395F30E92B3) Active Trip Point 0 Fan Speed
Callback ID = 0x81
Minimum: 0
Maximum: 100
Step: 1
Default: 100
Setting: [100]

(0x190, 1, 0x61D25395F30E92B3) Active Trip Point 1
Callback ID = 0x82
(127)[ ] Disabled
(15)[ ] 15 C
(23)[ ] 23 C
(31)[ ] 31 C
(39)[ ] 39 C
(47)[ ] 47 C
(55)[*] 55 C (Default)
(63)[ ] 63 C
(71)[ ] 71 C
(79)[ ] 79 C
(87)[ ] 87 C
(95)[ ] 95 C
(103)[ ] 103 C
(111)[ ] 111 C
(119)[ ] 119 C (POR)

(0x18F, 1, 0x61D25395F30E92B3) Active Trip Point 1 Fan Speed
Callback ID = 0x83
Minimum: 0
Maximum: 100
Step: 1
Default: 75
Setting: [75]

(0x191, 1, 0x61D25395F30E92B3) Passive Trip Point
Callback ID = 0x84
(127)[ ] Disabled
(15)[ ] 15 C
(23)[ ] 23 C
(31)[ ] 31 C
(39)[ ] 39 C
(47)[ ] 47 C
(55)[ ] 55 C
(63)[ ] 63 C
(71)[ ] 71 C
(79)[ ] 79 C
(87)[ ] 87 C
(95)[*] 95 C (Default)
(103)[ ] 103 C
(111)[ ] 111 C
(119)[ ] 119 C (POR)

(0x192, 1, 0x61D25395F30E92B3) Passive TC1 Value
Callback ID = 0x85
Minimum: 1
Maximum: 16
Step: 1
Default: 1
Setting: [1]

(0x193, 1, 0x61D25395F30E92B3) Passive TC2 Value
Callback ID = 0x86
Minimum: 1
Maximum: 16
Step: 1
Default: 5
Setting: [5]

(0x194, 1, 0x61D25395F30E92B3) Passive TSP Value
Callback ID = 0x87
Minimum: 2
Maximum: 32
Step: 2
Default: 10
Setting: [10]

(0x501, 1, 0x61D25395F30E92B3) Active Trip Points
Callback ID = 0x88
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x3B3, 1, 0x61D25395F30E92B3) Passive Trip Points
Callback ID = 0x89
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x3B4, 1, 0x61D25395F30E92B3) Critical Trip Points
Callback ID = 0x8a
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x196, 1, 0x61D25395F30E92B3) PCH Thermal Device
Callback ID = 0x8b
(0)[*] Disabled (Default)
(1)[ ] Enabled in PCI mode
(2)[ ] Enabled in ACPI mode

(0x96F, 1, 0x61D25395F30E92B3) Alert Enable Lock
Callback ID = 0x8f
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x970, 1, 0x61D25395F30E92B3) PCH Alert
Callback ID = 0x90
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x971, 1, 0x61D25395F30E92B3) DIMM Alert
Callback ID = 0x91
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x972, 1, 0x61D25395F30E92B3) CPU Temp
Callback ID = 0x92
Minimum: 1
Maximum: 110
Step: 1
Default: 72
Setting: [72]

(0x973, 1, 0x61D25395F30E92B3) CPU Fan Speed
Callback ID = 0x93
Minimum: 1
Maximum: 100
Step: 1
Default: 65
Setting: [65]

********** DPTF Configuration **********

............................................................................................................................................

********** CPU Configuration **********
Type
N/A

ID
N/A

Speed
N/A

L1 Data Cache
N/A

L1 Instruction Cache
N/A

L2 Cache
N/A

L3 Cache
N/A

L4 eDRAM
N/A

VMX
N/A

SMX/TXT
N/A

(0x812, 1, 0x61D25395F30E92B3) C6DRAM
Callback ID = 0xa
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x814, 1, 0x61D25395F30E92B3) SW Guard Extensions (SGX)
Callback ID = 0x772
(0)[*] Disabled (Default)
(1)[ ] Enabled
(2)[ ] Software Controlled

(0x815, 1, 0x61D25395F30E92B3) Select Owner EPOCH input type
Callback ID = 0x681
(0)[*] No Change in Owner EPOCHs (Default)
(1)[ ] Change to New Random Owner EPOCHs
(2)[ ] Manual User Defined Owner EPOCHs

(0x81B, 8, 0x61D25395F30E92B3) Software Guard Extensions Epoch 0
Callback ID = 0xb
Minimum: 0x0
Maximum: 0xffffffffffffffff
Step: 0x1
Default: 0x553dfd8d5fa48f27
Setting: [0x553dfd8d5fa48f27]

(0x823, 8, 0x61D25395F30E92B3) Software Guard Extensions Epoch 1
Callback ID = 0x773
Minimum: 0x0
Maximum: 0xffffffffffffffff
Step: 0x1
Default: 0xd76767b9be4bfdc1
Setting: [0xd76767b9be4bfdc1]

(0x817, 4, 0x61D25395F30E92B3) PRMRR Size
Callback ID = 0xc
(0)[*] INVALID PRMRR (Default)
(33554432)[ ] 32MB
(67108864)[ ] 64MB
(134217728)[ ] 128MB

(0x2E6, 1, 0x61D25395F30E92B3) CPU Flex Ratio Override
Callback ID = 0xd
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x2E7, 1, 0x61D25395F30E92B3) CPU Flex Ratio Settings
Callback ID = 0x682
Minimum: 0
Maximum: 63
Step: 0
Default: 20
Setting: [20]

(0x33F, 1, 0x61D25395F30E92B3) Hardware Prefetcher
Callback ID = 0xe
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x4CE, 1, 0x61D25395F30E92B3) Adjacent Cache Line Prefetch
Callback ID = 0xf
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x19B, 1, 0x61D25395F30E92B3) Intel (VMX) Virtualization Technology
Callback ID = 0x10
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x916, 1, 0x61D25395F30E92B3) PECI
Callback ID = 0x11
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x198, 1, 0x61D25395F30E92B3) Active Processor Cores
Callback ID = 0x12
(0)[*] All (Default)
(1)[ ] 1
(2)[ ] 2
(3)[ ] 3

(0x199, 1, 0x61D25395F30E92B3) Hyper-Threading
Callback ID = 0x13
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x33D, 1, 0x61D25395F30E92B3) BIST
Callback ID = 0x14
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x917, 1, 0x61D25395F30E92B3) JTAG C10 Power
Callback ID = 0x15
(1)[ ] Enabled
(0)[*] Disabled (Default)

(0x204, 1, 0x61D25395F30E92B3) AP threads Idle Manner
Callback ID = 0x16
(1)[*] HALT Loop (Default)
(2)[ ] MWAIT Loop
(3)[ ] RUN Loop

(0x205, 1, 0x61D25395F30E92B3) AP threads Handoff Manner
Callback ID = 0x17
(1)[*] HALT Loop (Default)
(2)[ ] MWAIT Loop

(0x1E6, 1, 0x61D25395F30E92B3) AES
Callback ID = 0x18
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x206, 1, 0x61D25395F30E92B3) MachineCheck
Callback ID = 0x19
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x207, 1, 0x61D25395F30E92B3) MonitorMWait
Callback ID = 0x1a
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x863, 1, 0x61D25395F30E92B3) Flash Wear Out Protection
Callback ID = 0x1c
(0)[ ] Disabled
(1)[*] Enabled (Default)

Current Debug Interface Status
Disabled

(0x209, 1, 0x61D25395F30E92B3) Debug Interface
Callback ID = 0x1d
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x20A, 1, 0x61D25395F30E92B3) Direct Connect Interface
Callback ID = 0x1e
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x20B, 1, 0x61D25395F30E92B3) Debug Interface Lock
Callback ID = 0x1f
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x86B, 1, 0x61D25395F30E92B3) Processor trace memory allocation
Callback ID = 0x20
(255)[*] Disabled (Default)
(0)[ ] 4KB
(1)[ ] 8KB
(2)[ ] 16KB
(3)[ ] 32KB
(4)[ ] 64KB
(5)[ ] 128KB
(6)[ ] 256KB
(7)[ ] 512KB
(8)[ ] 1MB
(9)[ ] 2MB
(10)[ ] 4MB
(11)[ ] 8MB
(12)[ ] 16MB
(13)[ ] 32MB
(14)[ ] 64MB
(15)[ ] 128MB

(0x86C, 1, 0x61D25395F30E92B3) Processor trace
Callback ID = 0x21
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x86A, 1, 0x61D25395F30E92B3) Processor Trace OutPut Scheme
Callback ID = 0x22
(0)[*] Single Range Output (Default)
(1)[ ] ToPA Output

(0x86D, 1, 0x61D25395F30E92B3) FCLK Frequency for Early Power On
Callback ID = 0x24
(0)[*] Normal (800Mhz) (Default)
(1)[ ] 1GHz
(2)[ ] 400MHz

(0xD7A, 1, 0x61D25395F30E92B3) Voltage Optimization
Callback ID = 0x25
(0)[ ] Disabled
(1)[*] Enabled (Default)

********** GT - Power Management Control **********
(0x17C, 1, 0x61D25395F30E92B3) RC6(Render Standby)
Callback ID = 0x28
(0)[ ] Disabled
(1)[*] Enabled (Default)

********** CPU - Power Management Control **********
(0x340, 1, 0x61D25395F30E92B3) Boot performance mode
Callback ID = 0x29
(0)[ ] Max Battery
(1)[*] Max Non-Turbo Performance (Default)
(2)[ ] Turbo Performance

(0x197, 1, 0x61D25395F30E92B3) Intel(R) SpeedStep(tm)
Callback ID = 0x2a
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x510, 1, 0x61D25395F30E92B3) HardWare P states (HWP)
Callback ID = 0x2b
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x850, 1, 0x61D25395F30E92B3) HDC Control
Callback ID = 0x2c
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x19C, 1, 0x61D25395F30E92B3) Turbo Mode
Callback ID = 0x2d
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x83E, 1, 0x61D25395F30E92B3) Platform PL1 Enable
Callback ID = 0x31
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x83F, 4, 0x61D25395F30E92B3) Platform PL1 Power
Callback ID = 0x32
Minimum: 0
Maximum: 4095875
Step: 125
Default: 0
Setting: [0]

(0x843, 1, 0x61D25395F30E92B3) Platform PL1 Time Window
Callback ID = 0x33
(0)[*] 0 (Default)
(1)[ ] 1
(2)[ ] 2
(3)[ ] 3
(4)[ ] 4
(5)[ ] 5
(6)[ ] 6
(7)[ ] 7
(8)[ ] 8
(10)[ ] 10
(12)[ ] 12
(14)[ ] 14
(16)[ ] 16
(20)[ ] 20
(24)[ ] 24
(28)[ ] 28
(32)[ ] 32
(40)[ ] 40
(48)[ ] 48
(56)[ ] 56
(64)[ ] 64
(80)[ ] 80
(96)[ ] 96
(112)[ ] 112
(128)[ ] 128

(0x844, 1, 0x61D25395F30E92B3) Platform PL2 Enable
Callback ID = 0x34
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x845, 4, 0x61D25395F30E92B3) Platform PL2 Power
Callback ID = 0x35
Minimum: 0
Maximum: 4095875
Step: 125
Default: 0
Setting: [0]

(0x1B8, 1, 0x61D25395F30E92B3) Power Limit 4 Override
Callback ID = 0x36
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1B9, 4, 0x61D25395F30E92B3) Power Limit 4
Callback ID = 0x37
Minimum: 0
Maximum: 4095875
Step: 125
Default: 0
Setting: [0]

(0x1BD, 1, 0x61D25395F30E92B3) Power Limit 4 Lock
Callback ID = 0x38
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1C5, 1, 0x61D25395F30E92B3) C states
Callback ID = 0x39
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x1C6, 1, 0x61D25395F30E92B3) Enhanced C-states
Callback ID = 0x3a
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x1C7, 1, 0x61D25395F30E92B3) C-State Auto Demotion
Callback ID = 0x3b
(0)[ ] Disabled
(1)[ ] C1
(2)[ ] C3
(3)[*] C1 and C3 (Default)

(0x849, 1, 0x61D25395F30E92B3) C-State Un-demotion
Callback ID = 0x3c
(0)[ ] Disabled
(1)[ ] C1
(2)[ ] C3
(3)[*] C1 and C3 (Default)

(0x1C9, 1, 0x61D25395F30E92B3) Package C-State Demotion
Callback ID = 0x3d
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1CA, 1, 0x61D25395F30E92B3) Package C-State Un-demotion
Callback ID = 0x3e
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1CB, 1, 0x61D25395F30E92B3) CState Pre-Wake
Callback ID = 0x3f
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x84D, 1, 0x61D25395F30E92B3) IO MWAIT Redirection
Callback ID = 0x40
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1CC, 1, 0x61D25395F30E92B3) Package C State Limit
Callback ID = 0x41
(0)[ ] C0/C1
(1)[ ] C2
(2)[ ] C3
(3)[ ] C6
(4)[ ] C7
(5)[ ] C7S
(6)[*] C8 (Default)
(7)[ ] C9
(8)[ ] C10
(254)[ ] Cpu Default
(255)[ ] Auto

********** C3 Latency Control(MSR 0x60A) **********
(0x1CD, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x42
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x1D0, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x43
Minimum: 0
Maximum: 1023
Step: 1
Default: 75
Setting: [75]

********** C6/C7 Short Latency Control(MSR 0x60B) **********
(0x1CE, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x44
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x1D2, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x45
Minimum: 0
Maximum: 1023
Step: 1
Default: 107
Setting: [107]

********** C6/C7 Long Latency Control(MSR 0x60C) **********
(0x1CF, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x46
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x1D4, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x47
Minimum: 0
Maximum: 1023
Step: 1
Default: 148
Setting: [148]

********** C8 Latency Control(MSR 0x633) **********
(0x38E, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x48
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x391, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x49
Minimum: 0
Maximum: 1023
Step: 1
Default: 250
Setting: [250]

********** C9 Latency Control(MSR 0x634) **********
(0x38F, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x4a
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x393, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x4b
Minimum: 0
Maximum: 1023
Step: 1
Default: 332
Setting: [332]

********** C10 Latency Control(MSR 0x635) **********
(0x390, 1, 0x61D25395F30E92B3) Time Unit
Callback ID = 0x4c
(0)[ ] 1 ns
(1)[ ] 32 ns
(2)[*] 1024 ns (Default)
(3)[ ] 32768 ns
(4)[ ] 1048576 ns
(5)[ ] 33554432 ns

(0x395, 2, 0x61D25395F30E92B3) Latency
Callback ID = 0x4d
Minimum: 0
Maximum: 1023
Step: 1
Default: 1010
Setting: [1010]

(0x84B, 1, 0x61D25395F30E92B3) Thermal Monitor
Callback ID = 0x4e
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x84E, 1, 0x61D25395F30E92B3) Interrupt Redirection Mode Selection
Callback ID = 0x4f
(0)[ ] Fixed Priority
(1)[ ] Round robin
(2)[ ] Hash Vector
(4)[*] PAIR with Fixed Priority (Default)
(5)[ ] PAIR with Round Robin
(6)[ ] PAIR with Hash Vector
(7)[ ] No Change

(0x84C, 1, 0x61D25395F30E92B3) Timed MWAIT
Callback ID = 0x50
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1E9, 1, 0x61D25395F30E92B3) EC Turbo Control Mode
Callback ID = 0x52
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1EA, 1, 0x61D25395F30E92B3) AC Brick Capacity
Callback ID = 0x53
(1)[*] 90W AC Brick (Default)
(2)[ ] 65W AC Brick
(3)[ ] 75W AC Brick

(0x1EB, 1, 0x61D25395F30E92B3) EC Polling Period
Callback ID = 0x54
Minimum: 1
Maximum: 255
Step: 1
Default: 1
Setting: [1]

(0x1EC, 1, 0x61D25395F30E92B3) EC Guard Band Value
Callback ID = 0x55
Minimum: 0
Maximum: 20
Step: 1
Default: 0
Setting: [0]

(0x1ED, 1, 0x61D25395F30E92B3) EC Algorithm Selection
Callback ID = 0x56
Minimum: 1
Maximum: 10
Step: 1
Default: 1
Setting: [1]

(0x911, 1, 0x61D25395F30E92B3) Energy Performance Gain
Callback ID = 0x57
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x912, 2, 0x61D25395F30E92B3) EPG DIMM Idd3N
Callback ID = 0x58
Minimum: 0
Maximum: 2000
Step: 1
Default: 26
Setting: [26]

(0x914, 2, 0x61D25395F30E92B3) EPG DIMM Idd3P
Callback ID = 0x59
Minimum: 0
Maximum: 2000
Step: 1
Default: 11
Setting: [11]

********** Custom P-state Table **********
(0x8F4, 1, 0x61D25395F30E92B3) Number of P states
Callback ID = 0x5c
Minimum: 0
Maximum: 40
Step: 0
Default: 0
Setting: [0]

(0x465, 1, 0x61D25395F30E92B3) Max P-State Ratio
Callback ID = 0x5d
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x466, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x5e
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x467, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x5f
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x468, 1, 0x61D25395F30E92B3) \x019A
Callback ID = 0x60
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x469, 1, 0x61D25395F30E92B3) \x019B
Callback ID = 0x61
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46A, 1, 0x61D25395F30E92B3) \x019C
Callback ID = 0x62
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46B, 1, 0x61D25395F30E92B3) \x019D
Callback ID = 0x63
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46C, 1, 0x61D25395F30E92B3) \x019E
Callback ID = 0x64
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46D, 1, 0x61D25395F30E92B3) \x019F
Callback ID = 0x65
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46E, 1, 0x61D25395F30E92B3) \x01A0
Callback ID = 0x66
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x46F, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x67
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x470, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x68
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x471, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x69
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x472, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6a
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x473, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6b
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x474, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6c
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x475, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6d
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x476, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6e
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x477, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x6f
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x478, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x70
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x479, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x71
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47A, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x72
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47B, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x73
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47C, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x74
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47D, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x75
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47E, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x76
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x47F, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x77
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x480, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x78
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x481, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x79
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x482, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7a
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x483, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7b
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x484, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7c
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x485, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7d
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x486, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7e
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x487, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x7f
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x488, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x80
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x489, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x81
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x48A, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x82
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x48B, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x83
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

(0x48C, 1, 0x61D25395F30E92B3) P-State Ratio
Callback ID = 0x84
Minimum: 0
Maximum: 127
Step: 0
Default: 0
Setting: [0]

********** Current Turbo Settings **********
Max Turbo Power Limit

Min Turbo Power Limit

Package TDP Limit

Power Limit 1

Power Limit 2

1-core Turbo Ratio

2-core Turbo Ratio

3-core Turbo Ratio

4-core Turbo Ratio

(0x1A3, 1, 0x61D25395F30E92B3) Energy Efficient P-state
Callback ID = 0x85
(0)[ ] Disabled
(1)[*] Enabled (Default)

(0x4C3, 1, 0x61D25395F30E92B3) Package Power Limit MSR Lock
Callback ID = 0x86
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1A9, 1, 0x61D25395F30E92B3) Power Limit 1 Override
Callback ID = 0x87
(0)[*] Disabled (Default)
(1)[ ] Enabled

(0x1AA, 1, 0x61D25395F30E92B3) Power Limit 1 Time Window
.....................................................................................................................Etc.

reply

#2 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Mon Apr 10, 2017 5:46 pm

I would dump the flash descriptor locks before and after using the wintest option with fpt.

If the ME is unlocked and not running: ie no bios menu, no lan activity, then it shouldn't be remotely vulnerable. From your local machine people would need signed code to infect the ME and they could just write something into your bios anyway.

reply

#3 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Mon Apr 10, 2017 6:16 pm (Last edited: Wed Apr 12, 2017 3:08 pm)

Zitat von Zucker2k im Beitrag #1
WinTest.exe C45 D80 unlocks the ME. Even though it says unlock, it seems more like shutdown, I suppose in preparation for the upgrade because after this command is issued the ME is unresponsive to any commands. MEInfo, MEManuf, and FWUpdLcl64 all don't work.

Yes that shutdown is essential for the Flash Descriptor read/write access to the ME to be unlocked and thus allow whole SPI image dumping and/or reflashing. It shuts down and at the next power on the BIOS sends a special message to ME during POST in order to temporarily (until next reboot) unlock access to its firmware for servicing. When the ME is in this recovery mode, all tools that rely on the MEI driver do not work, so that includes MEInfo, MEManuf and FWUpdate from the common ones.

Zitat von Zucker2k im Beitrag #1
My question is, with the "unlocked" ME dumped bios, is it possible that the ME could be in a vulnerable state where its settings could be changed?

Yes and no. The ME is both an "operational" (power management, fan control, silicon workaround etc - check the intro of the ME thread) and security engine (IPT, BootGuard etc). From a security standpoint, the ME does not rely at the Flash Descriptor lock (locked ME read/write access) to keep itself protected. It will not execute any nefarious code but enter recovery mode if it detects alterations, corruption etc. Also changing it's settings at the SPI flash firmware is not very feasible without breaking checksums, causing corruption etc. Those configuration settings stored there are not sensitive data either way. Bottom line is this: leaving the FD unlocked allows easy repairing/reflashing/upgrading/modding etc of the ME via software tools such as Flash Programming Tool (FPT), flashrom etc. Generally though, as per Intel recommendation/instruction, the FD should be kept locked to prevent unwanted modifications of the locked SPI partitions, meaning FD and ME. It's usually a good way to prevent BIOS flashers/updaters etc from accidentally deleting the ME firmware by accident and thus causing a brick or similar.

Zitat von Zucker2k im Beitrag #1
Since it's totally unresponsive in a live system, could it be extracted and settings edited to unlock it permanently, injected back and possibly flashed back while the system is rendered receptive again - ie. UAC off, ME unlocked? Is this worth a shot?

If you want you can unlock the FD by changing some bytes in order to not require that Lenovo tool to unlock it every time. In your case, since you now have a tool which can unlock the FD whenever you need, you can keep it locked and only do otherwise when you want to repair/upgrade etc.

Zitat von Zucker2k im Beitrag #1
It appears the ME unlock procedure is only necessary for the upgrade of the ME firmware and so has nothing to do with the secure-flash protection mechanisms of the rest of bios, but I want to believe that the ME itself can offer a backdoor into the castle.

Yes, the main reason for unlocking the FD is to service the locked/"protected" regions of the SPI chip, meaning FD and ME. Any BIOS-specific locks (protected ranges etc) are not related to the above. The BIOS is not locked at the FD access control but can have its own protections which are vendor, OEM etc specific. I don't have knowledge on the latter, nor do I know how to unlock hidden menus and so on. That MEInfo report shows something very important, your system does not have Intel BootGuard enabled. BG cannot be disabled once activated by the OEM (a PCH swap would be needed) and it would prevent any BIOS modding from your part. So the fact that is is disabled is not ideal for security but it does allow you to mess around if you like. Be careful to not enable it by accident when configuring the ME (BootGuard settings at Flash Image Tool) if you want to keep it that way.

Zitat von Zucker2k im Beitrag #1
I did manage to upgrade my ME FW to version 11.6, but FITC version still remained 11.0.

It doesn't matter. The FIT version is just the tool that was used to configure the ME region. When you use FWUpdate that field remains as it was before by the OEM. If you actually used FIT 11.6 to configure a ME region and flashed it, that field would change as well. But it's only a visual thing, useless otherwise. As for the bold "GbE Region Missing" warning, that's normal for systems which do not use an Intel GbE controller.

Zitat von Zucker2k im Beitrag #1
While on 11.6, I got some errors (yellow text) in MEManuf. Also, I couldn't downgrade or revert to 11.0 using FWUpdLcl64. Only a bios reflash did the trick.

Those MEManuf errors are normal when using 11.6 tools at 11.0 based systems and/or firmware. They have been reported by others in the past too, so they're probably temporary software bugs, and thus should be ignored. You cannot downgrade from 11.6 to 11.0 using FWUpdate as it's not a valid "upgrade"/downgrade option due to higher Version Control Number of any 11.6 firmware compared to 11.0.

reply

#4 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Wed Apr 12, 2017 1:04 am (Last edited: Wed Apr 12, 2017 1:06 am)

Thanks to NSAFarm and Plutomaniac for your inputs. I ventured a bit further and run a tool supplied by Dudu2002 on bios-mods. I've linked him to this thread. There is a marked difference in the stock and unlocked results.

https://www.sendspace.com/filegroup/g68zU%2FUOlpzpqSy82yiPyw

I'm pretty sure Lenovo's internal tool could write directly to the right registers but, alas, I have no idea what those are.

reply

#5 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Wed Apr 12, 2017 3:03 pm

Could you please upload the Lenovo BIOS mentioned in the first post? ;)

aka Velocet | Xeon E3-1230v3 @ ASUS Z87 Gryphon (mBIOS 3301)|
Samsung 960 Pro NVMe via kryoM.2 evo|ASUS GTX 650 Ti Boost OC

reply

#6 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Fri Nov 24, 2017 8:25 pm

@Zucker2k please upload the original bios (the one you decompressed and that contains the utilities) that ca be very useful for rasearch!

reply

#7 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 3:43 am (Last edited: Sat Nov 25, 2017 3:44 am)

I found this one and need to be unpacked and tested if it is the correct one:

https://download.lenovo.com/consumer/mobiles/cdcn35ww.exe

reply

#8 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 10:26 am (Last edited: Sat Nov 25, 2017 10:26 am)

nope.. that is the new one. not the one mentioned in the first post.

reply

#9 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 11:58 am

here it is one that fit the description in first post, you can unpack with 7z.
https://download.lenovo.com/consumer/mob...eupdate_002.exe

I have to test it on M92p and T410 to see if I can read the ME firmware, unlock flash descriptor.

reply

#10 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 2:36 pm

thanks!! how did you find it? I lost an hour searching for it.

reply

#11 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 3:41 pm (Last edited: Sat Nov 25, 2017 4:33 pm)

Last night I lost ~6h trying to find and unpack different bios file.
Today it was quick I look directly after AMT firmware for that model and it was quick to unpack.

I test WinTest on Lenovo M92P desktop but no luck...
this was the answer at first run... no idea what OBF is:
WinTest.exe C45 D80
-C45 D80
System is in OBF status.: No error
Received data len= 1
Received Data 0 = 55

after that all I get if I test with different data is:
Received data len=0

EDIT:
keyboard disabled on T410 until I reboot:

WinTest.exe C40 D02
-C40 D02

Received data len= 2
Received Data 0 = f0
Received Data 1 = 5a

reply

#12 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Sat Nov 25, 2017 4:51 pm

here it is data from Wintest from 2 Lenovo computers maybe it help to understand and map:

T410
Common RAM
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
--------------------------------------------------------------------
F600 06 34 CC 77 28 00 00 00 18 0A EA 01 08 10 00 00
F610 D2 3C EA 01 D0 3C EA 01 68 FE 18 00 F5 0F 41 00
F620 FD 0F 41 00 75 F7 D9 F3 00 00 00 00 28 00 00 00
F630 C0 DA 42 00 01 00 00 00 00 00 00 00 C0 DA 42 00
F640 28 00 00 00 A4 FE 18 00 2D 10 41 00 24 0A EA 01
F650 CE 16 41 00 01 00 00 00 C5 16 41 00 B9 F7 D9 F3
F660 35 00 00 00 A8 9C 42 00 00 00 00 00 06 00 00 00
F670 35 00 00 00 74 FE 18 00 00 00 00 00 08 FF 18 00
F680 A0 E9 40 00 35 60 83 F3 FE FF FF FF C5 16 41 00
F690 B9 A2 41 00 01 00 00 00 D8 3C EA 01 35 00 00 00
F6A0 01 00 00 00 20 00 00 00 00 00 00 00 D0 FE 18 00
F6B0 FF 41 41 00 E8 D1 42 00 18 FF 18 00 3A 18 41 00
F6C0 11 00 00 00 98 CE 40 00 01 00 00 00 A8 9C 42 00
F6D0 87 CE 40 00 05 F6 D9 F3 B1 1D 00 00 00 00 00 00
F6E0 01 00 00 00 35 00 00 00 EC FE 18 00 B9 14 DB 76
F6F0 78 FF 18 00 A0 E9 40 00 B5 6E 83 F3 FE FF FF FF

M92p
Common RAM
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
---------------------------------------------------------------------
F600 16 34 6D 77 28 00 00 00 18 0A 37 00 08 10 00 00
F610 F2 39 37 00 F0 39 37 00 68 FE 18 00 F5 0F 41 00
F620 FD 0F 41 00 71 24 9C 41 00 00 00 00 28 00 00 00
F630 C0 DA 42 00 01 00 00 00 00 00 00 00 C0 DA 42 00
F640 28 00 00 00 A4 FE 18 00 2D 10 41 00 24 0A 37 00
F650 CE 16 41 00 01 00 00 00 C5 16 41 00 BD 24 9C 41
F660 35 00 00 00 A8 9C 42 00 00 00 00 00 06 00 00 00
F670 35 00 00 00 74 FE 18 00 00 00 00 00 08 FF 18 00
F680 A0 E9 40 00 31 B3 C6 41 FE FF FF FF C5 16 41 00
F690 B9 A2 41 00 01 00 00 00 F8 39 37 00 35 00 00 00
F6A0 01 00 00 00 20 00 00 00 00 00 00 00 D0 FE 18 00
F6B0 FF 41 41 00 E8 D1 42 00 18 FF 18 00 3A 18 41 00
F6C0 11 00 00 00 98 CE 40 00 01 00 00 00 A8 9C 42 00
F6D0 87 CE 40 00 01 25 9C 41 B1 1D 00 00 00 00 00 00
F6E0 01 00 00 00 35 00 00 00 EC FE 18 00 B9 14 33 76
F6F0 78 FF 18 00 A0 E9 40 00 B1 BD C6 41 FE FF FF FF

reply

#13 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Mon Nov 27, 2017 3:55 am

https://pcsupport.lenovo.com/us/en/produ...ffiliate:xg02ds

reply

#14 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Tue Dec 12, 2017 10:47 pm (Last edited: Fri Dec 15, 2017 4:58 pm)

ataigun

Show info

Posts:	2
Registered since:	12.12.2017

Descriptor + ME unlock dump flash for Lenovo Y700-15ISK

extract "DESC_ME_Unlock.zip" to drive D:

Open CMD Run as administrator, and navigate to "DESC_ME_Unlock" folder
To unlock descriptor and ME, in CMD window, type:

1
 
ME_unlock

laptop restarting and ME + descriptor is unlocked. Audio sound chipset of laptop not working.

Open CMD Run as administrator, and navigate to "DESC_ME_Unlock" folder
To dump ME and descriptor in CMD window, type:

1
2
 
fptw.exe -D me.bin -ME  
fptw.exe -D desc.bin -DESC
 

me.bin 2MB file generated
desc.bin 4KB file generated

To flash ME and descriptor in CMD window, type:

1
2
 
fptw.exe -rewrite -F desc.bin -DESC
fptw.exe -rewrite -F me.bin -ME
 

To dump BIOS in CMD window, type:

1
 
fptw -bios -d bios.bin

bios.bin 6MB file generated

AFTER DONE WITH FLASH ME AND DESCRIPTOR, MUST LOCK ME FOR ENABLE AUDIO SOUND OF LAPTOP
To lock descriptor and ME, in CMD window, type:

1
 
ME_lock

I need help to modify descriptor (desc.bin) for allow write acces for all bios region
for use flash bios

1
 
fptw -rewrite -bios -f bios.bin

ataigun has attached files to this post

reply

#15 | RE: ME "unlock" and Impact On Modded Bios Flashing - Lenovo Ideapad Y700 15isk (Skylake-H) datum

Fri Sep 13, 2019 1:43 am

Zitat von ataigun im Beitrag #14
I need help to modify descriptor (desc.bin) for allow write acces for all bios region
for use flash bios

@ataigun I have the same laptop. The inability to flash BIOS is due to Protected Range Registers. Nothing you do to the descriptor will change anything.

You can get rid of the PRRs by patching BiosRegionLockDxe. I described it in another thread. The way I did it, you still have to do external flashing once (and later make sure to only flash modified BIOS so as not to lock yourself out).

reply

MSI Godlike Gaming Carbon with OLD MEI...need Help...Please.. � � Dell Inspiron 7559 Shutdown without warning after 30 Min.

Page 1 of 2 � Page 1 2 Page �

Please enter a reason for warning.