@POE_UK Stay away from bios F7 insta 1.55v vcore no Mather what u set as Voltage

Zitat von Jman im Beitrag #1141

---

@POE_UK Stay away from bios F7 insta 1.55v vcore no Mather what u set as Voltage

---

Just tried f7 on the secondry bios for shits n giggles, while it will run the ram at 3666 cas 14 stable performance with IBT AVX seems worse

@POE_UK and the vcore voltage isn't super high for you?

No mate running the cpu at 4350Mhz 1.355v with turbo LLC

Darn your chip is Soo good the max I can get at that Voltage is 4.2 ghz

It will run at 4.4 with the f7 bios, im beginning to suspect that Relaxed EDC throttling is DISABLED in this bios.

You are a lucky few it seems. Mine for 4.3 even needs about 1.45v. temps around 68c cinebench with new cooling. Still fails intelburntest (bit runs until the end and says instability detected or some shit. ) Gonna try reflash the bios F7. Maybe was a bad flash

Is your motherboard revisions 0 or 1?

Zitat von Jman im Beitrag #1150

---

Is your motherboard revisions 0 or 1?

---

Same as mine. Darn I never got lucky with silicon. Maybe ryzen 3000 series will be my good luck chip

Why gigabyte insist on disabling Relaxed EDC throttling is beyond me.

Even an old b350 my brother as have much more settings than our boards. He runs an MSI b350 artic mortar I think. Way more settings available

I know for a fact EDC is disabled in f7 because its running slower at 4350mhz than f5 bios at 4.2

f7 bios has been released by gigabyte for higher APU performance yet this board doesnt have a HDMI socket lmao, gotta laugh at gigabyte lol