I kinda hope that with cooler temps the overclock ceiling will rise with mine. Cool setup though. My ram is a 4133mhz B-die kit from gskill runs 3400 14 14 14 28 without errors. The only thing that's bothering me is that I can run 4.1ghz with 1.2875v stable. And even with 1.4v can't get bench stable 4.2ghz. temps sky rock and that kinda makes me think that probably that's my issue since I'm using a AIO with a 240mm aluminium rad. I can bench cpuz 4.2ghz with 1.35vbbut cinebench prime95 or aida64 all freeze after a few minutes. I've ordered all the gear to make a custom loop. Waiting on it. Would you mind sharing your bios settings @POE_UK? Maybe I'm missing something.

Zitat von Jman im Beitrag #1126

---

I kinda hope that with cooler temps the overclock ceiling will rise with mine. Cool setup though. My ram is a 4133mhz B-die kit from gskill runs 3400 14 14 14 28 without errors. The only thing that's bothering me is that I can run 4.1ghz with 1.2875v stable. And even with 1.4v can't get bench stable 4.2ghz. temps sky rock and that kinda makes me think that probably that's my issue since I'm using a AIO with a 240mm aluminium rad. I can bench cpuz 4.2ghz with 1.35vbbut cinebench prime95 or aida64 all freeze after a few minutes. I've ordered all the gear to make a custom loop. Waiting on it. Would you mind sharing your bios settings @POE_UK? Maybe I'm missing something.

---

Ty for that I got 2x 360mm rads too (,when finally everything gets delivered and hopefully I didn't forgot anything) even got a freaking barrow waterblock for my 1080ti the whole point being to be able to run the system with less "noise" I'll be sure to try your settings. Those ram timings are much tighter than mine. And BTW any reason you set the oc over pstate rather than normal?

Yea np at all, i use the p-state so the cpu will auto downlock at idle, shaving off roughly 8 celcius.

My Graphics board is far from a 1080ti but damn for an old girl she sure runs pretty much anything at 60fps and 1080p! the one before this was a HD5970, she was a beast at the time, the dual gpu one, its the same as 2xhd 5870s, the 5970 card ran about 25fps more in games than the hd7870 overclocked.

As i rarely play games just gonna wait till another asus 7870 comes along on ebay and dual gpu them together, thats perfectly fine for me, i play games about once a fortnight, too busy on my model railway!

Mine are the magicool slim radiators, https://www.overclockers.co.uk/magicool-...-wc-024-ma.html

nowt special but at least they are brass, dont need those thick rads they just take more air to cool, also i will tell you these rads dont even get warm, the water circulation alone is cooling the cpu, ryzen is very efficient.

My mrs switched the pc on without the pump running for 2 hours and zero damage was done! the 2700x is a beautiful piece of engineering.

Yea mines running totally silent now even with 12 fans, im using corsair sp120 rgb fans connected to corsiar lighting node pro box

WARNING: this applies to any gigabyte board on am4

Dont even touch p-state2, this is what bricks boards, im going totally disable it next time im on the bios editor.

Also notice HPET is disabled, windows10 has absolutely no use for it, it just causes issues. HPET was an old intel compatibilty layer, windows10's timers are far more efficient. HPET on mine was disabled by default anyway but i tweaked the bios to make it visible, when switched off games fps rise dramatically, upto 15 fps gained. New games do not use old routines to run, HPET also causes various windows10 memory errors to popup.

@POE_UK you are a beautiful man, copy paste all your settings (why the hell not). And shit it just works. Wtf... Even though with LLC turbo failed after 5 cinebench probably because of temps . Hitting 80.6c tried 90.6c tctl. Thank you again

This is great news fella, and any time if you need any help give me a shout.

Yes and something else i will say, the best cpu thermal paste for ryzen is ARTCIC MX4, ive tried everything and i mean everything even thermal grizzly, MX4 loves ryzen, one straight line of it down the middle = 5c cooler than anything else. my rad fans spin up about 10% of the time

@ket
hey. is there a F24 in the making? ;)
1.0.0.6 AGESA ;)

Cinebench scores is 20 points higher than 4.1ghz 3200 cl 12 12 12 12 24. Is that normal? Kinda disappointed 😂

Youve got a result, its higher not lower, now then read the post before... MX4 fella, grab some.

Another thing cinebench isnt really reactive of real world performance, try intelburntest AVX before and after the tweaks

This is the one you want, its designed to use ryzens avx https://quickfileshare.org/9uw?pt=IszzkT...0EI9cvjVHln8%3D you should be hitting well over 210 Gflops when i run a 12,000mb run i get 236.1Gflops

@POE_WK that's what. Using atm . Even tried Conductonaut and mx-4 is the best by far

Zitat von Jman im Beitrag #1135

---

@POE_WK that's what. Using atm . Even tried Conductonaut and mx-4 is the best by far

---

Rip. Cold boot it's a nae... have to try to ease the timings

-Deleted

F25 BIOS seems to have been released for X370/B350. Hope they fixed some stuff from F24

New BIOS Version for Gaming 5 is out F25 > https://www.gigabyte.com/us/Motherboard/...support-dl-bios