@Jman - $BDR will show you the way any time, few rows under that is where you find (Circled in red in the image). So you were able to unhide your settings you wanted, and they just didn't help, or could you never see them in BIOS? If you still need help making something visible I can probably help.

@Lost_N_BIOS sorry for the late reply. yes that's the way I got to it. So i managed to unhide turbo Boost ratio and memory clear. Disabled spread Spectrum by default and set the xfr2 enable as optimal and failsafe. Kinda annoying to reset CMOS and have to enable it every time. The settings that I really wanted the most ain't editable under AMIBCP. So I think that I'll probably try to replace CBS options module with the one from x370 gaming k5 f22 bios. That has straight manual pob limits exposed. Hopefully I won't brick the main bios or else gigabyte will have to send me a spare chip

BTW spread Spectrum made a great diference on the timings on my kit. Had it 14 14 15 14 34 so it stayed stable. Now it's running @ 3400 14 14 14 14 28 with fast preset subtimings from Dram Calculator. Works like a charm now. 3600 mhz still kinda iffy. Probably because my IC ain't golden. But managed to run xfr2 with -0.125mv offset stable with power saving options off. Or -0.1125mv with power saving on. That result's in 4.125-4.175ghz all core boost under synthetic load and up to 4.275ghz all cores while gaming @at max peak voltage of 1.428v.
Ordered an 360mm rad to replace my 240mm one can't wait to see the difference

A 3x120mm rad from a 2x120 will make no difference at all with ryzen, these cpus run upto 4.1ghz on the stock coolers. my 2700x on a 240 or 360 rad has a 1celcius difference no joke. im at 4.3ghz at 1.395v max 73c with IBT and 12000mb runs

Another note: what the hell have gigabyte done to the new rgb fusion app? wow its bad.

The one I have is aluminium ( LEPA EXLLUSION 240MM AIO ) @POE_UK and have no idea. I don't use the RGB. Is at red on bios fusion settings

The RGB fusion 2.0 app is absolutely horrible, even the design looks unfinished. and once its installed you cant get rid of it, its messing with my rgb ram colours at boot, stupid bloody idiots.

@POE_UK can't be mad at them either they make a good board or a good software. We talking about gigabyte 🤣

Does this company employ pot smokers or something or are they all just plain stupid.

Probably both

@Jman - edit your CBS menu via IFR/hex to unsuppress what you need, then you wont need to swap anything.

@Lost_N_BIOS I honestly have no clue how to do that. Are you aware if there is any kind of guide on that Mather?

IM SOO CONFUSED! @POE_UK did gigabyte deleted bios F6? aint available to download anymore, last bios is F5 wtf

No guide that I know of, do you know how to get IFR and use a hex editor already? If yes, show me a short segment out of the IFR with a suppress if above a setting you want and I'll show you back how to unsuppress it.

" https://puissanceled.com/vrac/Bios_modding/EN.html " ive found that as a "guideline" way too advanced for me, better leave it alone ty anyways

Yes, midway down is about where you'd start on modifying IFR/Hex, changes wont be as easy as that guide though, we rarely get the true/flash nowadays
I can do for you if you want. Can you already see some/any CBS in the BIOS or no?

@Lost_N_BIOS it's ok doesn't worth the trouble thank you , and they deleted the bios on their page too. Wondering why though