Im soo mad im not smart enough to do this xD Ty all for the hints

@Jman - you can do it easy if it's in AMIBCP, well as long as it's not in "Chipset" section it's easy usually, sometimes you might need an outside of AMIBCP edit to unhide something, but not usually if the root of the section that contains the setting you want is already visible to you.
If you are still unsure, link the BIOS in question and tell me the setting you want enabled, so I don't have to look back to find it. And tell me if the section it's in in AMIBCP is visible to you already in the BIOS, such as "It's in Advanced >> CPU, or Advanced >>> Thermal Config etc"

@Lost_N_Bios i think Maybe i explained myself poorly . It's not showing under M.I.T. - Advanced Voltage. Only found the string of text with all the options.if it were under M.I.T. I believe it would only require us to tick the checkbox as Show. But that's not the case. Although I've tried to extract the module from setup from the g5 and replaced the gk5 setup module with that the bios becomes unreadable even on AMIBCP. hopefully someone else will take a look at that sooner or later. Clearly the board can do it but there's the settings missing. Thanks for the help anyway

You may need to set "User" in AMIBCP, do you mean it's not visible at all in AMIBCP? If not visible in AMIBCP, then yes it's involved (Very) to get it showing, but it can be done
I just checked AX370 Gaming 5 F23i BIOS, and I see it in AMIBCP @ M.I.T. - Advanced Voltage, this can easily be enabled, set access/use to USER for Vcore LLC and Vcore SOC and you'll be ready to LLC all day long.

@Lost_N_BIOS - You should try to look at gaming k5, that's the one missing the settings. The base idea was copying it from gaming 5 to gaming k5 since allegedly it uses the same voltage regulator. I'll start working soon " like in 20min. Soo I'll check back as soon as possible

Sorry, that's why I asked you to link the BIOS Yes, this very involved method would be needed to add those - https://forums.overclockers.ru/viewtopic.php?f=25&t=599984

Darn, that's a shame. Hopefully Ket will be able to do it. It's a shame cause the board ain't that bad but I'm limited on oc cause of VDrop

He may be able to via module swapping, or the method above, and if he's incentivized enough to get on it. Do you have flash programmer @Jman

@Lost_N_BIOS hello. I do have a bios flasher . Never used it tho. 😁

Get it out, and get to the point where you have verified (Chip and buffer match) backup, then make sure it's a verified BIOS by opening in BIOS tools or hex and make sure it's not all FF's or 00's.
If it looks good, then you would be ready to test a setup module swap, it will probably fail though, but at least you could test and see what happens.

I'm doing that as we speak. First I'll test it on an old gpu to test cause I'm not really sure what I'm doing

old GPU? What does that have to do with anything?

Only to test the flasher. Cause never used it. Easier to test if it works on old gpu than the mb

Ohh, those BIOS roms are soooooo small! Just use it on your board, carefully.
Easier to test on board, and be done when you're done, than have to do it all over again on the board.
Since you'd have to find which software version works for each item, sounds like twice the work for nothing to me

Only reads 0000000000's out of it....